Radio Shack 2000423 User Manual Users manual
RadioShack Corporation Users manual
Users manual
20423 Owner’s Manual Draft Cat Nov 20-423 OWNER'S MANUAL Please read before usmg (his equipment. PRO-2017 ZOO-Channel Programmable Home Scanner RadioShack LOGO Page 1 20423 Owner’s Manual Draft FEATURES Vour RadioShack PRO-2017 ZOO-Channel Programmable Home Scanner lets you in on all the action! This scanner gives you direct access to over 25,000 frequencies, including those used by police and fire departments, ambulance services, government agencies. air, and amateur radio services. You can select up to 200 channels to scan. and you can change your selection at anytime. The secret to your scanner’s ability to scan so many frequencies is its custom-desngned microprocessor- a tiny, built-in computer. Your scanner also has these special features: Four Service Banks — let you search preset frequencies in separate lirefpolice, air. ham radio, and marine banks, to make it easy to locate specific types of calls. TWO‘SGCOHC] Scan Delay — delays scanning for 2 seconds before moving to another channel, so you can hear more replies. Ten Channel-Storage Banks — you canstore up to 20 channels in each of 10 diflerent banks, to group channels so you can more easily identily calls. 20 Monitor Memories — let you temporarily save up to 20 trequencies you locate during a search, so you can move selected freouencres to channel storage later. Memory Backup - keeps the channel frequencies stored in memory for about 1 hour during a power loss. HyperSearch TM and HyperSoan TM — let you set the scanner to search at up to 50 steps per second and at upto 25 channels per second, to help quickly find interesting broadcasts. Duplicate Frequency Check — automatically notifies you if you are about to store a lrequenoy you have already Stored, to help avoid wasting storage space. Direct Search — lets you search lor new and unlisted frequencies starting trom a specified frequency. Page 2 20-423 Owner's Manual Draft Priority Channel _ lets you designate a channel to be scanned every two seconds so you do not miss important calls. Weather Band Key — scans 7 rare-programmed weather frequencies to keep you informed about correct weather conditions. Weather Alert - automatically sounds the alarm tone to advise of hazardous weather conditions when it detects the alen signal on the local NOAA weather channel. Lock-Out: Function — lets you set your scanner to skip over specified channels or frequencies when scanning or searching. Liquid Crystal Display — makes it easy to view and change programming information at any time. Display Eacklig ht - makes the scanner easy to read in low light situations. Supplied Telescoping Antenna ~ lets you receive strong local signals. External Antenna Terminal — lets you connect an external antenna (not supplied) to the scanner. Dual Conversion — helps prevent interterence from image trequencies. (cl 2000 Tandy Corporations. FtadioShack is a registered trademark used by Tandy Corporation. Hypersearch and Hyperscan are trademarks used by Tandy Corporation, We recommend you record your soanner’s serial number here. The number is on the soanner‘s back panel. Serial N umber: WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. Page 3 20-423 Owner’s Manual Draft Your PRO—20W scanner can receive all of these frequencies: 29—30 MHZ 10m Amateur Radio 30—50 MHz VHF Lo 50—54 MHz 6m Amateur Radio 108~136.9875 MHZ Air 137—144 MHz Government 144—148 MHz 2m Amateur Radio 148—174 MHz VHF Hi 380—420 MHz Government 420—450 M Hz 70cm Amateur Radio 450—470 MHz UHF L0 470—512 MHZ UHF 'T” Band FCC NOTICE Your scanner might cause TV or radio interference even when it is operating properly. To determine it your scanner is causing the interference tum alt your scanner. It the interference goes away, your scanner is causing it. Try the lollowlng methods to eliminate the interference. . Move your scanner away from the TV or radio, . Connect your scanner to an outtet that is on a ditterent electrical circuit from the TV or radio. . Contact your local RadloShack store tor help. if you cannot eliminate the interference, the FCC requires that you stop using your scanner. This device complies With Part 15 of FCC Rules. Operation is subject to the following conditions: (1) This device must not cause harmful interference, and (2) this device must accept any interierence received, including interference that may cause undesired operation. Page 4 20-423 Owner’s Manual Draft SCANNING LEGALLY Your scanner covers frequencies used by many different groups including police and fire departments, ambulance services. government agencies. private companies, amateur radio sen/ices, military operations, pager services. and wireline (telephone and telegraph) service providers. it is legal to listen to almost every transmission your scanner can receive. However, there are some transmissions you should never intentionally listen to. These include: . telephone conversations (cellular, cordless, or other private means at telephone signal transmission) . pager transmissions . any scrambled or encrypted transmissions According to the Electronic Communications Privacy Act (ECPA), you are subject to fines and possible imprisonment for intentionally listening to, using or divulging the contents 01 such a transmission unless you have the consent oi a party to the communication (unless such activity is otherwise illegal). This scanner has been designed to prevent reception of illegal transmissions. This is clone to comply with the legal requirement that scanners be manufactured so as to nol be easily modifiable to pick up those transmissions, Do not open your scanner's case to make any modifications that could allow it to pick up transmissions that it is not legal to listen to. Doing so could subject you to legal penalties. We encourage responSible, legal scanner use. Page 5 20-423 Owner’s Manual Draft CONTENTS will add Page 6 20-423 Owner’s Manual Draft PREPARATION POWER SOURCES Using Ac Power The scanner’s supplied AC adapter lets you power the scanner from a standard AC outlet. To connect powerto the scanner, insert the AC adapters barrel plug into the DC 12Vjack on the back 01 the scanner, then plug the AC adapter into a standard AC outlet add illustration. Warning: Do not use the AC adapters polarized plug with an extension cord receptacle unless the blades can be fully inserted to prevent blade exposure. Cautions: . You must use a Class 2 power source that supplies 12 volts DC and delivers at least SOD mA, Its center tip must be set to positive and its plug must tit the PR072017’5 DC 12V jack. The supplied adapter meets these specifications Using an adapter that does not meet these specifications could damage the PRO-2017 or the adapter. . Be sure to connect the AC adapter to the scanner before you connect it to an AC outlet, and disconnect the AC adapter lrom the AC outlet before you disconnect it 1mm the scanner Using DC Power Vou can power your scanner from your vehicle‘s cigarette-lighter socket with an optional DC adapter, such as RadioShack Cat No. 270-1533. Page 7 20—423 Owner’s Manual Draft Cautions: . You must use a Class 2 power source that supplies l2 volts DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must lit the PRO-2017's DC 12V jack. The recommended adapter meets these specifications. Using an adapterthat does not meet these specifications could damage the PRO-2017 or the adapter. . Be sure to connect the DC adapter to the scanner before you connect it to the Cigarette- lighter socket, and disconnect the DC adapter from the cigarette-lighter socket before you disconnect it from the scanner. To connect a DC adapter, insert its 5.5mm outer diameter/2.1 mm inner diameter barrel plug into the DC 12V iack on the back of the scanner, then plug the adapter into your vehicle’s Cigarette-lighter socket. add illustration. Notes: . If you use a DC adapter and your vehicle's engine is running, you might hear electrical noise on the scanner caused by the engine. This is normal . Mobile use of this scanner is unlawful or requires a permit in some areas. Check the laws in your area. CONNECTING AN ANTENNA Connecting the Supplied Antenna You must install an antenna before you can operate the scanner. The supplied telescoping antenna helps your scanner receive strong local signals. To install the antenna. thread it clockwise into the hole on top at the scanner. add illustration. The scanner‘s sensitivity depends on its location and the antenna's length. For the best reception of the transmissions you want to hear, adjust the antenna‘s length according to the chart below. Page 8 20-423 Owner’s Manual Dtafi Frequency Antenna Length 29—174 MHz Extend fully 380—512 MHz Extend 2 segments Connecting an Outdoor Antenna instead of the supplied antenna, you can connect an outdoor base-station or mobile antenna (not supplied} to your scanner. Your local FladioSh-ack stole sells a variety of antennas, Choose the one that best meets your needs. When deciding on an outdoor antenna and its location, consider these paints: , The antenna should be located as high as possible. . The antenna and antenna cable should be as far as possible from sources of electrical noise (appliances, other radios, and so on). . The antenna should be venical tor the best performance. To connect an optional base-station or mobile antenna, first remove the supplied antenna from the scanner. Always use 50-ohm coaxial cable, such as HG-sa or RG-s, to connect the base-station or mobile antenna. For lengths over 50 feet, use RG-B low-loss dielectric coaxial cable. It the antenna cable's connector does not fit in the ANT jack on the back of the scanner, you might also need a F'L-259-to-Motorola antenna plug adapter, such as Cat. No. 278208. Your local RadioShack store carries a wide variety cl coaxial antenna cable and connectors. Once you choose an antenna, follow the mounting instructions Suppiled with the antenna. Then route the antenna’s cable to the scanner and connect the cable to the ANT lack. add illustration. Page 9 20-423 Owner's Manual Draft Warning: Use extreme caulion when you install or remove an outdoor antenna. if the antenna starts to loll, let ll go! It could contact overhead power lines. ll the antenna touches a power llne, contact with the antenna, mast, cable, or guy wlres can cause electrocution and death. Call the power company to remove the antenna. Do not attempt to do so yourself. Caution: Do not run the cable over sharp edges or moving parts lhal might damage it. Page 10 20- 423 Owner's Manual Draft UNDERSTANDING THE PRO—2017 Once you understand a few simple terms used in this manuai and familiarize yourself with your scanners features, you can put the scanner to work for you. You simply determine the type of communications you want to receive, then set the scanner to scan them. A frequency is the tuning location of a station (expressed in kHz or MHz). To find active frequencies, you can use the search function. You can also search the service-search banks, which are preset groups of frequencies categorized by type of servioe. When you find a frequency, you can store it into a programmabie memory location called a ohannei, which is grouped with your other channels in a channei~storage bank. You can then scan the channel-storage banks to see if there is activity on the frequencies stored there. Each time the scanner finds an active frequency, it stays on that channei until the transmission ends. A LOOK AT THE KEYPAD Your scanner‘s keys might seem confusing at first. but this information shouid help you understand each key‘s fu notion, SAND ALERT WK ‘~ZD Zi-AD 1.1750 SCAR MANUAL Li‘O R'IW 51—50 51-100 iDi-‘iZD uuoflu a a») A 7 121—140 141—163 151-150 DC) Big MON F'BM 15‘-ZDO DELAY ENTE? (cogs-i BAND—lets you search preprogrammed service banks, PRI/ALEFiT—tums the priority function on and olf, or sets the WX atert mode, WX—scans through the 7 ore-programmed weather channetst SCAN—scans through the programmed channels. Page 11 20-423 Owner's Manual Draft MANUAL—atolls scanning and lets you directly enter a channel number. uO RVW, LIO—lets you review locked-out frequencies, or lets you lock out selected channels/frequencies so they will not be scanned or searches. A and V—begins searching up or down for active frequencies or selects the direction when you scan channels. MON/CL—accesses the 20 monitor memories or clears an incorrect entry. PG M—programs frequencies into channels. Number Keys—each key has a single-digit label and a range 01 numbers. Use the digits on the keys to enter the numbers for a channel or a frequency. Use the range oi numbers above the key (21-40, for example) to select the channel in a channel-storage bank. See ‘Understanding Service Banks/Banksl‘Mernories.' DELAYL—prograrns a Evsecond delay for the selected channel, or enters a decimal point (necessew when programming frequenmes). ENTER—enters frequencies into channels. A LOOK AT THE DISPLAY The display has indicators that show the scanner's current operation. A quick look at the display will help you understand how to operate your scanner. FDlPD BANK- 1_-__1_11_° AIRHAM' l "ANNE SEHCHQBB. 8388- sncr-rscm MAN PGM PRI DLY FD/PD — appears when you search the firelpolioe sen/ice bank. BANK — appears with numbers (1—10). Bank numbers with a bar under them show which ones are turned on for scanning. See “Understanding Service Banks/BankslMemories." AlFl — appears when you search the air service bank. HAM — appears when you search the ham radio service bank. MAHlNE — appears when you search the marine service bank. A or V - indicates the search or scan direction. M — flashes with a number (1 -2G) to show which monilor memory you are listening to. CH — the digits that precede this indicator (1-200 and P) show which channel the scanner is tu med to. L/O — appears when you manually select a channel you locked out while scanning or you Page 12 20-423 Owner’s Manual Draft reView a locked out trequency. WX — appears when you scan the weather channels. SRCH — appears during sen/ice bank and direct frequency searches. SCAN — appears when you scan channels. MAN — appears when you manually select a channel. PGM — appears while you program frequencies into the scanner's channels. PHI — when you turn on the priority feature. DLY — appears when you program a 2»eeoond delay, Error — appears when you make an entry error. -dUPL- — appears when you try to store a frequency that is already stored in another channeL -d- — appears during a direct frequency search. -b- — appears during a senrice bank frequency search. Ch-FULL - appears when you try to enter a frequency during a search when all channels are full. F L-out — appears when you start direct search from a locked out frequency. FLo -FULL — appears when you try to lockout a frequency during a search when 50 frequencies are aiready locked out. L-r — appears when you review the lockout frequencies. dEFAU Lt — appears when you remove all the iocked out from the service bank frequencies. FLo ALL-CL — appears when you remove all the locked out frequencies during a service bank/direct search. P — appears when the scanner is tuned to a priority channel. ALErt - appears when the scanner is watching the WX alert tone. WirEd - appears when you turn on the wired programming mode. StArt -— appears when the scanner start wired programming. C-Error — appears when the scanner receive check sum error during wired programming. D-Error - appears when the scanner finds data error during wired programming. End - appears when the scanner finishes wired programming. OFF tonE - appears when you set the key lone oft. ON tonE — appears when you set the key tone on. Page 13 20-423 Owner's Manual Draft UN DERSTAND|NG SERVICE BANKSiBANKS/M EMOH IES Service Bank The scanner is preprogrammed with the irequencies allocated by firefpolics. aircraft, ham radio, and marine services. in these service banks, you can search through the frequencies and store them in channels ior fire/police. aircraft, ham radio. and marine banks. This is handy for quickly finding active frequencies instead ofsearching through an entire band. Note: The frequencies in the scanner‘s service bank are preset. ‘(eu cannot change them. Fire] Police Group Frequency range (MHz) Step (kHz) 1 33.420-33.BBD 20 37020-37420 20 39020-39980 20 42020-42940 20 4402045360 40 45.880 45.900 45340-45060 40 46080-46500 20 2 153.770-1 54.1 30 60 154.145-154.445 15 154.650-154.950 15 155.010-1 55.370 60 155415455700 15 155730456210 60 153 730-1 59.210 60 166.250 170.150 3 453.0375-4533625 12.5 4580375458362} 125 460.0125-4606375 12.5 465.0125—465.6375 12.5 Page 34 20-423 Owner’s Manual Draft Air Frequency range (MHz) Step (kHz) 1080004369875 1205 Amateur Radio Group Frequency range (MHz) Shep (kHz) 1 29 00029700 5 2 50000—54000 5 3 144.000-1 43.000 5 4 420000450000 12.5 Marine a Channe! Frequency (M Hz] 06 156.3000 07 156.3500 03 156.4000 09 156.4500 10 1565000 11 156.5500 12 156.6000 13 155.6500 14 155.7000 15 156.7500 16 156.8000 17 156.8500 18 156.9000 19 156.9500 20 157.0000j151.6000 21 157.0500 22 157.1000 23 1 571500 24 157.2000f161.8000 25 157.25001161‘8500 26 157.30001'1619000 27 15135001161 9500 28 151400011520000 Page 15 20423 Owner’s Manual Draft 64 156.2250 65 156.2750 66 156 3250 67 1 56.3750 68 155.4250 69 155.4750 70 1565250 71 156.5750 72 1566250 73 156.6750 74 156.7250 77 1568750 78 156.9250 79 156.9750 80 1 570250 81 1 570750 82 157.1250 83 157.1750 84 157.225011513250 85 157.2750l161.8750 66 157.3250/1613250 87 157375011613750 88 157.4250 Channel-Storage Banks To make it easier to identily and select the channels you want to listen to, channels are diwded into 10 banks at 20 channels each. Use each channel-storage bank to group frequencies, such as those used by the police depenmenl, fire department, ambulance services. or aircraft (see “Guide to the Action Bands" on Page XX). For example, the police department might use tour frequencies, one lur each side of town, You could program the police frequencies starting with Channel 1 [the tire! channel in bank 1] and program the lire department frequencies slanlng with Channel 21 (the first channel in bank 2). Page 16 20-423 Owner’s Manual Draft Monitor Memories The scanner aiso has 20 munitor memories that you can use |c temporarily store frequencies while you decide whether (0 save Ihem into channeis. This is handy Ior quickiy storing an active frequency when you are searching through an entire band. You can slore a frequency into a monitor memonl during a sewice bank, or direct search. See “Finding and Storing Active Frequencies.” You can seieci monitor memories manuaily, but you cannot scan them. See “Listening 10 Momior Memories.” Page 17 20423 Owner’s Manual Draft OPERATION TURNING ON THE SCANNERJSE'I'FING VOLUME AND SQUELCH 1. Turn SQUELCH Iully counterclockwise until the indicator points to MIN before you turn on the scanner. add illustraticn. 2. To turn on the scanner, turn VOLUME clockwise until you hear a hissing sound. 3. Turn SQU ELCH clockwise, luel unfil the hissing sound stops. Notes: . To listen to a weak or distant station, turn SQUELCH counterclockwise. I! reception is poor, turn SOUE LCH clockwise to cut out weak transmissions . It SQU ELCH is adjusted so you always hear a hissing sound, the scanner does not scan or search properly, 4. To turn off the scanner when you finish, turn VOLUME counterclockwise to OFF. STORING KNOWN FREQENCIES INTO CHANNELS Good reierences for active frequencies are the FladicShack Police Call, Aeronautical Frequency Directory, and Maritime Frequency Directory. We update these directories every year, so be sure ta get a current copy. Follow these steps to store frequencies into channels. 1. Press PGM, enter the channel number (1—200) where you want to store a trequency. then press PGM again. The channel number appears. Page 18 20-423 Owner’s Manual Draft 2, Use the number keys and . to enter the frequency (including the decimal point) you want to store. add illustration. 3. Press ENTER to store the frequency into the channef. Notes: . If you made a mistake in Step 2, Error appears and the scanner beeps when you press ENTER. Simply start again from Step 2. . Your scanner automatically rounds the entered frequency down to the closest valid frequency. For example, if you enter a frequency for 151.473, your scanner accepts it as 151.470. . If you entered a frequency that is already stored in another channel, the scanner beeps three times and displays the lowest channel number where the frequency is already stored, and —dUPL—, then the frequency flashes. ll you want to store the frequency anyway, press ENTER again. Press MON/CLto clear the frequency . Press DELAY if you want the scanner to pause 2 seconds on IhlS channel after a transmission ends before it proceeds to the next channel (see “Using the Delay Functicn' on Page XX). The scanner also stores this setting in the channel. 4. To program the next channel in sequence, press PGM and repeat Steps 2 and 3. FINDING AND STORING ACTIVE FREQUENCIES Searching the Service Banks Your scanner contains groups of preset frequencies called service banks. Each service bank is associated with a specific actiwty (see "Service Banks“ on Page XX). You can search for fire/police, air, ham, and marine transmissions even if you do not know the specific frequencies that are used in your area. Then you can store the frequencies you found into the scanner’e channels or monitor memories, Page 19 20-423 Owner’s Manual Draft Notes: . You can use the scanner's delay leature while searching the service banks, see 'Using the Delay Function” on Page XX. . This procedure uses HAM. FD/F'D, and AIR service banks. if you want to listen to marine bank, see ”Listening to a Marine Bank.“ 1. Press BAND. The last selected band name (such as HAM), S'RCH, -b-, frequency and the group number (it any) appear on the display. 2. To select a dilferenl band, repeatedly press BAND until the desired band name appears on the display. Alter about 2 seconds, the scanner begins searching rapidly in that band lor an active frequency. Notes: . To reverse the search direction at any time, hold down (UP key) or (DN key) for about 1 second. . To search the band up or down in small increments (see “Service Banks‘ on Page XX for frequency steps), repeatedly press and release (UP key) or (DN key). . To pause the search while receiving a signal press and release (UP key) or (DN key). To continue the Search, hold down (UP key) or (DN key), . To quickly move upward or downward through the frequencies, press and hold down (UP key) or (DN key). The scanner tunes through the frequencies until you release (UP key) or (DN key). 3. It needed, select search group with numeral key. 4. When the scanner finds an active frequency, it stops searching and displays the irequency's number. To store the displayed frequency in the lowest available channel, press PGM then press ENTER. The channel and frequency Hash twice, and the scanner stores the displayed lrequency. The scanner then continues to search for irequencies, Notes: . ii there is no empty channel, Ch-FULL appears after PGM pressed. To store more irequehcres, you must clear some channels. See “Clearing a Stored Channel“ on Page XX. To continue searching after Ch-FULL appears, press and hold down (UP key) or (DN key). Page 20 207423 Owner‘s Manual Draft . If you entered a frequency that is already stored in another channel, -dUPL- (duplicate) and the lowest-numbered channel containing the duplicate frequency flash on the display for about 3 seconds, If you want to store the frequency anyway, press ENTER again. You can then delete the frequency later. See “Clearing a Stored Channel' on Page XX, To store the displayed frequency in the channel which you seiecl, press PGM. press channel number you wish to enter the channel, then press ENTER. The channel and trequency flash twtce, and the scanner stores the displayed frequency, The scanner continues to search tor trequencies. 5, To store the displayed frequency in the monitor memory, press MONICL. The monitor memow number, M and the frequencytlash twice, 5, To search for another active frequency in the selected band, hold down (UP key) or (DN key) for about 1 second, To select a different band and search for another active frequency, repeat Steps 2—6. Using Direct Search During a direct search, the scanner searches up or down, starting from a frequency you specify. Follow these steps to use direct search. Note: You can use the scanner’s delay teature while using direct search. i, Press MANUAL or PGM, then enter the frequency (including the decimal point) you want to use as a starting point (or the search. Note: To start from a irequency already stored in one oi your scanner's channels, press MAN or PGM, enter the desired channel number, then press MANUAL or PGM again. Hold down (UP key) or (DN key} for aboutt second to search up or down. —d—t SRCH, and (UP) or (DN) appear on the display. add illustration. Page 21 20-423 Owner‘s Manual Draft Notes: . To reverse me rapid search direction at any time, hold down (UP key) or (DN key) for about 1 second. . To search up or down the selected band in small increments (in steps 5, 12‘s, or 25 kHz), press and release (UP key) or (DN key). . To pause the search, press and release (UP key) or (DN key). To continue the search, hold down (UP key) or (DN key). . To quickly move upward or downward through the frequencies, press and hold down (UP key) or (DN kay). The scanner tunes through the frequencies until you release (UP key) or (DN key). 2. When the scanner finds an active frequency, it stops searching and displays the lrequency‘s number. To store the displayed frequency in the lowest available channel, press PGM then press ENTER. The channel and frequency flash twice, and the scanner stores the displayed frequency. The scanner continues to search for frequencies. Notes: , if there is no empty channel, Ch-FULL appears. To store more frequencies, you must clear some channels. See 'Clearing a Stored Channel" on Page XX. To continue searching after Ch-FULL appears, press and hold down (UP key) or (DN key). . if you entered a frequency that is already stored in another channel, ~dUPL- (duplicate) and the lowest-numbered channel containing the duplicate freqUEncy flash on the display for about 3 seconds, if you want to store the frequency anyway, press ENTER again, To store the displayed frequency in the channel which you select, press PGM, press channel number you wish to enter the channel. then press ENTER. The channel and frequency flash twice, and the scanner stores the displayed frequency. The scanner continues to search for frequencies. 3. To store the displayed frequency in the monitor memory, press MON/CL. M, the monitor memory number, and the frequency flash twrce. 4. To search for another active frequency, hold down (UP key) or (DN key) for about 1 second. Page 22 20-423 Owner‘s Manual Draft USING THE MONITOR MEMORY Llstening to the Monitor Memory To recall a frequency stored in the monitor memory, press MANUAL then MON/CL. M, monitor memory number, and CH flash and the current monitor memory frequency appears on the display. To select other monitor memories, enter the desired monitor memory‘s number (1—20). then press MONICL again. The selected monitor memory‘s frequency appears. add illustration. Moving 3 Frequency from the Monitor Memory to a Channel 1. Press PGM, enter the channel number where you want to store the frequency, then press PGM. PGM and the selected channel number appear on the display. 2. Press MON/CL. M, a monitor memory number, and CH flash. and the monitor memory frequency appear on the display. 3. Enter the desired monitor memory’s number (1—20), then press MONICL again. The selected monitor memory's lrequency appears. 4. Press ENTER. The scanner stores the frequency in the selected channel, 5. To move another monitor memory trequency to the next channel, press PGM and repeat Steps 2—4. SCANNING THE STORED CHANNELS To set the scanner to continuously scan through all channels with stored frequencies, simply press SCAN. SCAN and (UP) appear on the display, and the scanner begins to rapidly seen up until it finds an active lrequency. add illustration. Page 23 20-423 Owner‘s Manual Draft it the scanner finds an active frequency, it stops and displays that channel and frequency number, then it automatically begins scanning again when the transmission ends on that frequency. Notes: . To reverse the scanning direction press (UP key) or (DN key). . To set the scanner to remain on the current channel tor 2 seconds after the transmission ends. see “Using the Delay Function’ on Page XX. . To set the scanner to remain on the current channel, even alter the transmission stops, press MANUAL at any time during the transmission so MAN appears and SCAN disappears lrom the display (see “Monitoring a Stored Channel" on Page XXL . To look out channels so the scanner does not stop tor a transmission on those channels see “Locking out Channels and Frequencies“ on Page XX. TURNING CHANNEL-STOR AGE BANKS OFF AND ON To turn off a channel-storage bank (1—10)‘ press SCAN to see which banks are currently on. Storage banks are on when they have a bar underneath them and off When no bar appears underneath them. Press the bank's number key so the her under the bank's number disappears Note: The scanner does not scan any of the channels within the banks you have turned off. To turn on a channel-storage bank (1—10), press SCAN‘ and then press the bank‘s number key so a bar appears under the bank‘s number. Notes: . You cannot turn all all banks. There must he at least one active bank. . You can manually select any channel in a bank, even if the bank is turned oft. A When you turn on the bank while scanning, the scanner moves to the selected bank’s channel and continues scanning. Page 24 20423 Owner’s Manual Draft MONITORING A STORED CHANNEL You can continuously monitor a specific channel without scanning. This is useful if you hear an emergency broadcast on a channel and do nol want to miss any details — even though there might be periods 0! Silence — or il you simply want it: monitor that channel. Follow these steps to manually select a channel. 1. Press MANUAL 2. Enter the channel number (1—200). 3 Press MANUAL again. CLEARING A STORED CHANNEL ll you no longer want a frequency stored in a channel (and you do not want to replace lnal frequency With a different one), lollow lhese slaps to clear the stored lrequency. 1. Press MAN UALlo get out ol lhe service banks or to slap scanning. 2. To select the desired channel number, use the number keys lo enter that channel number (1—200). then press MANUAL. 3. Press PGM. PGM appears. 4. Press 0. then press ENTER. The frequency number changes to 000.0000 on the display 10 indicate the channel is cleared. 5. To clear another channel. use the number keys Io enter thal channel number (1 —200), then press PGM again. Or. repeatedly press PGM until lhe desired channel number appears. Then repeat Step 4. Page 25 20-423 Owner's Manual Draft LISTENING TO THE MARINE BANK To listen to the marine bank, repealedly press BAND until MARINE appears on the display. To change the channel manually, press and release (UP key) or (DN key). Press and hold (UP key) or (DN key) about 2 seconds. the scanner scans through the marine bank, MAN disappears and SCAN appears on the display. To change the scanning direction, press (UP key) or (DN key}. To continue changing the channel manually, press and hold (UP key) or (DN key) about 2 seconds. Press two digits numeric key does move to selected marine channel within marine manual mode. LISTENING TO THE WEATHER BAND To hear your local forecast and regional weather information, press WX. Your scanner begins to scan through the weather band. Your scanner should stop within a lew seconds on your local weather broadcast. If Ihe broadcast is weak, you can pressWX again to resume scanning, Weather Channel Frequency (MHz) 1 52.400 162.425 152.450 162.475 162.500 162.525 162.550 qmmewm—A Page 26 20-423 Owner’s Manual Draft WX Alert Feature This scanner can detect lhe weather alert lone. The WX alert warns you of serious weather condmons by soundmg an alarm H the weather sen/lee broadcasts the weather alert lone. To listen to the alert lone, press FHIIALERT while you are Ilstenlng to the WX channel. ALErt appears on the display. II we scanner delects the weather slerl, it sounds an alarm. Press any key to mute the alarm. To cancel lhe wealher alert operation, press PHI/ALERT agaml Page 27 20428 Owner’s Manual Draft SPECIAL FEATURES DELAY Many agencies use a two-way radio system that has a period 01 several seconds between a query and a reply To avoid missing a reply. you can program a 2-second delay into any channel or frequency. When your scanner steps into any channel or frequency with a programmed delay. DLY appears and the scanner continues to monitor that frequency for 2 seconds alter the transmission stops before resuming scanning or searching, You can program a 2-seccnd delay in any of these ways: t it the scanner is scanning and stops on an active channel, quickly press DELAY]. before it continues scanning again. . If the desired channel is not selected, manually select the channel, then press DELAY. t ll the scanner is searching. press DELAYh DLY appears and the scanner automatically adds a 2—second delay to every transmission it stops on in that band. To turn oft the 2-second delay. press DELAYf. while the scanner is monitoring the channel or lrequency. DLY disappears trom the display. LOCKING OUT CHANNELS AND FREQUENCIES Vou can increase the effective scanning or search speed by locking out individual channels or frequencies that have a continuous transmission, such as a weather channel (See “National Weather Frequencies" on Page XX) or birdie irequency (see “Birdie Frequencies‘ on Page XX). Locking Out Channels To lock out a channel while scanning, press and release LIO/LJO RVW when the scanner stops on the channel. To look out a channel manually, select the channel then press and release LlO/LIO RVW until L/O appears on the display. Page 28 20-423 Owner‘s Manual Draft To remove the lookout from a channel, manually select that channel again, then press LIOILIO RVW so LIO disappears from the display. Notes: , Your scanner automatically looks out empty channels. . You can still manually select Iocked~out channels. Locking Out Frequencies To lock out a frequency during a service bank, or a direct search, press uOIL/O FlVW when the scanner stops on the frequency. The scanner locks out the frequency then continues searching. You can lock out frequencies in both direct search and service bank searches). Note: You can lock out as many as 50 lrequencies during a search. if you try to lock out more, FLo -FULL appears on the display (599 “Reviewing Locked-Out Frequencies” and “Removing Ail Lockout Tags Frorn Frequencies”), Reviewing Locked-Out Frequencies To review the lrequencies you looked out, hold down uoruo Fle at least 2 seconds during a search. L-r appears. As you press (UF' key) or (DN key), the scanner displays all locked out Frequencies. When you reach the highest frequency, the scanner beeps tvw‘ce and returns to the lowest locked-out frequency. Removing All Locked-Out Tags From Frequencies 1. Start a service bank or direct search. See 'Using Direct Search” on Page XX. 2. To review the frequencies you looked out, hold down L/OMO RVW lor about 2 seconds during the search. L-r appears on the display. 3. Hold down MON/CL then LjOiLi’O RVW. FLo ALL-CL appears on the display. Page 29 20-423 Owner’s Manual Draft 4. Press ENTER to clear all the lockout frequenCies. The frequency clears and 0000000 appears. if you do not want to clear lockout tags, press MONJCL to continue revtewing all the lockout frequencies. Removing All LockoutTagsirom Frequencies in All Service Banks 1. Start a service bank or direct search. See "Using Direct Search“ on Page XX, 2. To review the frequencies you locked out, hold down LIO/LIO RVW for about 2 seconds during the search. L-r appears on the dispiay. 3. Hold down MONfCLthen press BAND. dEFAuLt appears on the display. 4. Press ENTER to clear the lookout frequencies in all the sen/ice banks (except weather bank). lf you do nut want to clear the lookout tags. press MDNICLtD continue reviewing the lookout trequencies. USlNG PRIORITY Usrng the priority feature. you can scan through the programmed channels and still not miss an important or interesting call on a specific channel, To program a priority channel as loliows: 1. Press PGM, then press PHI/ALERT, 2. Enter the frequency with numeral keys. 3. Press ENTER. To turn on the priority feature, press PHI/ALERT during scanning. PHI appears on the display. The scanner checks the priority channel every two seconds and stays on the channel if there is activity. F‘CH appears on the display whenever the scanner is set to the priority Chan nel. To turn of! the priority feature, press PFtl. PFlI disappears from the display. Page 30 20-423 Owner’s Manual Draft if you program WX frequency into the priority channel, the scanner can detect WX alert tone while priority feature is on When the scanner detects WX alert tone, ALEn flashes on the display. To cancel the alert tone, press any key‘ and the scanner watch me WX channel. TURNING THE KEY TONE ON AND OFF The scanner is preset to sound a tone each time you press one at its keys. You can turn the key tone off or back on. 1. ll the scanner is on, slide the POWER switch to OFF position to turn it olfl 2, While you hold down 2 and ENTER, turn on the scannerr 3. The display shows OFF tonE or an tonE, then release 2 and ENTER. CONNECTING A DATA LINK TO THE SCANNER A data interface kit (not supplied) lets you program the scanner with frequencies stored in a computer program. Contact your local RadloShack store for more information. Page 31 20-423 Owner’s Manual Drafi A GENERAL SCANNING GU1DE Reception of the frequencies covered by your scanner is mainly ‘iine-Of—Sighl." This means you usuaily cannot hear siations the! are beyond the horizon GUIDE TO FREQUENCIES Nations! Weather Frequencies 161,650‘ 161.7?5‘ 162.400 162.425 162.440‘ 162450 162475 162500 162525 162550 163275' ‘Not preprogramrned in this scanner, bul you can manually program it, (See “Storing Known Frequencies into Channels' on Page XX) Ham Radio Frequencies Ham radio operators often transmit emergency informaiion when other means oi communication break down, The loliowing chart shows the frequencies this scanner receives that ham radio operators normaliy use: Wavelength Frequency (MHz) 10 meters 29000-29700 8 meters 50000-54000 2 meters 144000148 000 70 cm 420000450000 Note: Your scanner cannot receive AM transmissions on these bands. Page 32 207423 Owner’s Manual Draft Birdie Frequencies Every scanner has birdie frequencies — signals created inside “we scanner’s receiver. which might interfere with broadcasts on the same frequenCies. If you program one oi these frequencies, you hear only noise on that frequency. It the interference is not severe, you might be able to turn SQUELCH clockwise to cut out the birdie, To find the birdies in your scanner: . Disconnect the antenna and move it away irom the receiver. Make sure that no other nearby radio orTV sets are turned on near the scanner, . Search in each frequency band from its lowest frequency to the highest. Occasionally, the searching Wi" stop as it it had found a signal, often without any sound. That is a birdie. . Make a list 0! all the birdies in your particular scanner for iuture reterence. The birdie frequencres to watch for on the PRD»2017 are: birdie frequencies will add GUIDE TO THE ACTION BANDS United States Broadcast Bands In the United States, there are several broadcast bands. The standard AM and FM bands are probabiy the most well known. There are also tour teievismn audio broadcast bands - the lower three transmit on the VHF band and the fourth transmits on the UHF band. Page 33 20-423 Owner's Manual Draft Typical Band Usage HF Band (am—30.0 MHz) 10-Metsr Amateur 2900-2970 MHz High Flange 2970-2990 MHz VHF Band (woo—300.00 MHz) Low Range 3000-5000 MHz 6—Meier Amateur 50.00»54.00 MHz U.S. Government 13700-14400 MHz 2—Meter Amateur 14400-14800 MHZ High Flange 14800-17400 MHz UHF Band (300.00 MHz—3.0 GHZ) Military Aircraft 35000-33400 MHz U.S. Government 40600-42000 MHz 70-Centimeter Amateur 42000-45000 MHz Low Range 45000—47000 MHz FMVTV Audio Broadcast, Wide Band 47000-51200 MHZ Primary Usage As a general rule, most 01 ihe radio ac‘iiwty is concentrated on the following frequencies: VHF Band Activities Frequennles (MHz) Government. Police. and Fire 153.785—155380 Emergency Services 158.730—159AGO Railroad 150.000—161900 Page 34 20-423 OWner’s Manual Draft UHF Band Activities Frequencies (MHz) Land-Mobile ‘Palred” Frequencies 450.000—470‘000 Base Station 451.0125—454.950 Mobile Units 456.025—459350 Relay Repeater Units 490,025—464375 Remote Control Stations 465025469975 Note: Remote control stations and mobile units operate at 5 MHz higher than their associated base stations and relay repeater units. Specified Intervals Frequencies in different bands are accessible only at spectlic intervals. For example: Frequency Range(s) Specified lnterval 29—54 MHz and 137—174 MHz 5.0 kHz Steps 380—51 2 MHz 12.5 kHz Steps Note: ln service bank search, Ihe frequency interval is not the same as specified above. See “Service Banks" on Page XX. BAND ALLOCATION To help decide which frequency ranges to scan, use the following listing of the typical services that use the frequencies your scanner receives, These frequencies are subiect to change, and might vary from area to area. For a more complete listing, refer to Police Call, available at your local RadoShack store. Abbreviations Services AIR Aircraft BIFC Boise (lD) Interagenoy Fire Cache BUS Business CAP Civil Air Patrol CCA Common Carrier Page 35 CSB CTSB FIRE HAM GOVT G M R GTR IN D MAR MARI MARS MED MIL MOV N EW NEWS OIL POI. PU B PS B PT R Fi OAD FlTV TAXI T ELB TELC TELM TOW TRAN TSB 204423 Owner's Manual Draft Conventional Systems Convenlionalmunked Systems Fire Department Amateur (Ham) Radio Federal Government General Mobile Radio General Trunked Industrial Services (Manulacturing, Construction, Farming, Forest Products) Military Amateur Fladio Maritime Limited Coast (Coast Guard, Marine Telephone. Shipboard Radio. Private Stations) Military Afliiiate Radio Systems Emergency/Medical Services U.S. Military Motion PictureNideo Industry New Mobile Narrow Relay Press (Newspaper Reponers) Oil/Petroleum Industry Police Department Pu biic Services (Public Salely, Local Govt, Forestry Conservation) Public Safely Private Trunked Road & Highway Maintenance Fladiofi V Remote Broadcasl Pickup Taxi Services Mobile Telephone (Aircraft. Radio Common Carrier Landline Companies) Cordless Phones Telephone Mainlenanoe Tow Trucks Transportation Services (Trucks, Tow Trucks, Buses, Railroad. Other) Trunked Systems Page 36 20-423 Owner’s Manual Draft TVn FM-TV Aud'm Eroadcasl USXX Government Classified UTIL Power & Water Utilities WTHR Weather ngh Frequency (HF) Hi — (8 MHz—30 MHZ) 10-Meter Amateur Band — (260-297 MHZ] 29000-29700 HAM Very High Frequency (VHF) — (30 MHz—300 MHz) Low Band — (29.7—50 MHZ — m 5 kHz steps) 29700-29790 IND 29900-30550 GOVT, MIL 30580-31980 IND, PUB 32000-32990 GOVT, MIL 33020-33980 BUS, IND, PUB 34010-34990 GOVT, MIL 35020-35980 BUS. PUB, IND, TELM 36000-35230 GOVT, MIL 36,250 OII SpiII Clean-Up 38270436390 GOVT, MIL 31020-37380 PUB, IND 85.000~39.000 GOVT, MIL 39020-39980 PUB 40.000-42000 GOVT, MIL MARI 4202042940 POI. 42960-43180 IND 43220-43580 TELM, IN D, PUB 43700-44500 TRAN 44062046580 POL, PUB 45600-46990 GOVT, TELC 47.020—47.400 PUB 47.420 American Red Cross 41440-49580 IND, PUB Page 37 20-423 Owner's Manual Draft 49610-49890 MIL, TELC G—Meter Amateur Band — (50—54 MHz) 50100-5400 HAM U.S. Government Band (138—144 MHz) 137.0004 44.000 GOVT, MIL 2—Meter Amateur Band — (144—148 MHz} 144000448000 HAM VHF-HiBand(148-—174 MHZ) 1450504150345 CAP, MAR. MIL 150.775-1 50.790 MED 150 515150555 Tow 150.050 on Spill mean-Up 150595151130 ROAD 151 .145-151 .475 POL 151400151555 W D, BUS 151.955 TELM 152.0075 MED 152030152240 TELB 152.270-1 52.455 IND. TAXI 152.450 BUS 152510152540 TELB 152.570-1 53.020 IND, MOV 153035453725 IND, OIL UTIL 153740454445 PUB, HHE 154490154570 IND, BUS 154.505 Oil 5pm Clean-Up 154600454525 BUS 154555155240 MED, ROAD. POL, FUE 155.255 OIL 155275157425 MARL 157,450 MED 157.470-157515 TOW Page 38 157.530-1 57.725 157.740 157770458100 158.1304 58.460 158.4904 58.700 158,730-159.455 159.480 159.495-161565 161,580 161 500-1 62.000 162012546235 162.400-1 62.550 162.5625~162.6375 162.6625 182.6375-1 63.225 163.250 153.275-1 66.225 166.250 166.275~169.400 169.445 169.500 169.505 169.55-1 59.9875 170.000 170.025-170.150 170.175-170225 170.245-1 70.305 170.350-1 70.400 170.425-1 70.450 170,475 1704875473175 173.225-1 73.375 173.3375-1735375 173,5525-1735875 173.60-1 73.9375 IND, TAXI BUS TELB 20-423 Owner's Manual Draft BUS, IND, OlL, TE LM, UTIL TELB POL. PUB, ROAD OH. THAN OIL MARI, HTV GOVT, MIL. USXX WTHH GOVT. MIL, USXX MED GOVT. MIL. USXX MED GOVT. MIL, USXX GOVT, HTV, FIRE GOVT, BIFC ereless Mics GOVT Wire‘ess Mics GOVT, MIL, USXX ElFC GOVT, RTV, FIRE GOVT Wireless Mics GOVT, MIL BiFO PUB GOVT, PUB, Wireless Mics MOV, NEWS, UT! L M“. MIL. Medical/Crash Crews GOVT Page 39 20-423 Owner’s Manual Draft UItra High Frequency (UHF) (300 MHz—3 GHz) Military Aircraft Band (31991—3833 MHZ) 380.0004383000 Coast Guard US. Government Band (406—4150 MHz} 406125419875 GOVT. USXX TD—cm Amateur Band (420—450 MHz) 420000450000 Low Band (450-470 MHZ) 450050450925 451025452025 4520375453000 453.0125-4533375 454.000 454025454375 455050455325 457525457600 458025458175 460.0125-4606375 460650462 175 4621875452450 4624625452525 462550462725 462750462325 462.9375463.1875 463200467925 HAM FITV IND, OIL, TELM, UTIL IND, TAXI, THAN, TOW. NEWS PUB OIL TELB FITV BUS MED FIRE, POL, PUB BUS BUS, IND IND. OIL, TELM. UTIL GMR BUS MED BUS FM-TV AudIo Broadcast. UHF Wide Band (470—512 MHz) (Channels 14 through 20 in 6 MHz steps) 475.750 451 750 487.750 493.750 Channel 14 Channe1 15 Channel 16 Channel 17 Page 40 20-423 Owner’s Manual Draft 499.750 Channel 18 505.750 Channel 19 511.750 Channel 20 Note: Some cities use the 470—512 MHz band for land/mobile service. AVOIDING IMAGE FREQUENCIES You might discover one of your regular stations on another trequency that is not listed. It might be what is known as an image frequency, For example. you might find a service that regularly uses a irequency of 453.275 also on 474.675. To see if It is an image. do a tittie math. Note the new frequency. 474.675 Double the intermediate frequency of 107 MHz (21,400) and subtract ii from the new frequency -21.400 if the answer is the regular frequency, 453.275 then you have tuned to an image. Occasionally. you might get interference on a weak or distant channel from a strong broadcast 21.4 MHz above or below the tuned trequency. This is rare. and the image signal is usually cleared whenever there is a broadcast on the actual frequency, Page 41 20-423 Owner’s Manual Draft FREQUENCY CONVERSION The tuning iocation 0! a station can be expressed in frequency (kHz or MHZ) or in wavelength (meters) The ioHowing information can help you make the necessary conversions. 1 MHz (miliwon) =1,000 kHz (thousand) To convert MHZ to KHz, multwpiy the number 01 MHz by 1,000: 30.62 MHZ x 1000 = 30,620 kHz To convert from kHz 10 MHz, divide the number of kHz by 1,000. 127.800 kHZ/ 1000 =127.B MHz To convert MHZ to meters, divide 300 by the number of MHZ. 300 I 50 MHz - 6 meters Page 42 20-423 Owner’s Manual Draft TROUBLESHOOTING it your scanner is not working as it should, these suggestions might help you eliminate the problem lf the scanner still does not operate properly, take it to your local Hadioshack store for assistance. PROBLEM POSS|BLE CAUSES REMEDIES Scanner is totally The AC or DC power Be sure the adapter ls fully inserted inoperative. adapter is not connected. into the DC 12V iack. Poor or no reception. improperly connected Be sure the antenna is properly antenna. connected. Programming frequencies Avoid programming frequencies are the same as birdie listed under ‘Birdie Frequencies" on frequencies. Page XX or only select them manually. Error appears on the Programming error Reprogram the frequency correctly. display. Keys do not work or Undetermined error. Turn the scanner oft then on again, display changes. or reset the scanner (see “Hesettlngilnitlalizing the Scanner” on Page XX). Scanner is on but will not SQUELCH is not Adjust SQUELCH clockwise (see scan. correctly adjusted. “Turning on the ScannerfSetting Volume and Squelch“ on Page XX). in the scan mode, the Birdies. Avoid programming frequencies scanner locks on listed under ‘Birdie Frequencies" frequencies that have on Page XX or only listen to them Page 43 20-423 Owner’s Manual Draf: an unclear transmissmn. manuaily. RESETTING/INITIALIZING THE SCANNER It the scanner‘s display locks up or does not work properly after you connect a power source. you might need to reset or initialize the scanner. Important: If you have problems, first try to reset the swnner {see “Resetting the Scannei”). If that does not work, you can tnitiatize the scanner (see ‘Initiaiizing the Scanner" on Page XX); however, this clears ail information stored in your scanner's memory. Resetting the Scanner 1, Turn off the scanner, then turn it on again. 2. Insert a pointed object, such as a straightened paper clip, into the reset opening on the back of the scanner (as shown) and gently press then release the reset button inside the opening. add i|tustration. Note: If the scanner still does not work property, you might need to initialize the scanner (see “initializing the Scanner"). Page 44 20-423 Owner's Manual Draft |nitiallzing the Scanner Important: This procedure clears all information you stored in the scanner‘s memory. Initialize the scanner only when you are sure the scanner is not working properly. 1. Turn off the scanner then turn it on again. 2 Hold down MON/CL 3. While holding down MON/CL, insert a poinled obiect, such as a straightened paper clip, into the reset opening on the back of the scanner and gently press then release the reset button inside the opening, The display should clear. 4. When the display reappears. release MONch Note: You must release the reset bullon beiore releasing MON/CL, otherwtse the memory might not clean Page 45 20-423 Owner’s Manual Draft CARE AND MAiNTENANCE Your Radioshack PRO—2017 200-Channei Programmable Home Scanner is an example oi superior design and craftsmanship. The lollowing suggestions will help you care for your PRO-2017 so you can enjoy it lor years. Keep the PRO-2017 dry. Ii it gets wet, wipe it dry immediately. Liquids might contain minerals that can corrode the electronic circuits. Use and store the PRO-2017 only in normal temperature envtronments. Temperature extremes can shorten the lile cl electronic devices and distort or melt plastic parts, Keep the PRO-2017 away from dust and din, which can cause premature wear of pans. Handle the FRO-2017 gently and carefully. Dropping it can damage circuit boards and cases and can cause the PRO-2017 to work improperly. Wipe the PRO-2017 with a damp cloth occasionally to keep it looking new. Do not use harsh chemicals. cleaning solvents, or strong detergents to clean the PRO-2017. Modifying or tampering with the scanner’s internal components can cause a maliunction and might invalidate its warranty and void your FCC authorization to operate it. It your scanner is not performing as it should, take it to your local RadioShack store for assistance. Page 46 SPECIF|CATIONS Frequency Coverage: Ham VHF Lo Ham Air Government Ham VHF Hr Ham/Governmeni UHF L0 UH F Hi (T) Channeis 01 Operation Sensilivity (20 dB SN): 2964 MHZ 1084369575 MHZ 137-174 MHZ 380-512 MHZ Selectivny: +i-1O kHz +[-18 kHz Spurious Rejection Scanmng Rate Search Rate Delay Time Intermediate Frequencies UP): 15: 2m: IF imerference Ratio (107 MHz) Squslch Sensitivity: Threshold Tigh‘l (FM) Tight (AM) 29-423 Owner's Manual Draft 29-30 MHz (510 kHz Steps) 30-50 MHz [5.0 kHz Steps) 50-54 MHz (510 kHz Steps) 1084365875 MHZ (12.5 kHz Steps) 137-144 MHz (5 kHz Steps) 144-148 MHz (5 kHz Steps) 148-174 MHz (5 kHz Steps) 380-450 MHZ (12.5 kHz Steps} 450-470 MHz (125 kHz Steps) 470512 MHZ (12.5 kHz Steps) 200 Channeis and 20 Monitor Memon‘es 0.5 UV 1.0 uV 0.5 UV 0.7 UV 6 dB -50 dB 50 dB (FM al154 MHz] Up to 25 Channeieracond Up to 50 SiepsiSecond 2 Seccnds 107 MHZ 455 kHz 70 dB at154 MHz Less 1han 0.5 ml (MW 25 dB (S+N)fN 20 dB Page 47 20-423 Owner's Manual Draft Anuenna impedance 50 Ohms Audio Output Power (1 03/0 THD) 0.8 mW Nominal Built-in Speaker 3 inch (77 mm) B-ohm, Dynamic Type Power Requirements 120 V AC, 60 Hz, BW Operating Temperature §32F to +110F (DC to +430) Dimensions (HWD) 21116 x 8 1/4 x S 7/8 inches (52x 210 x 175 mm) Weight Approx 24 oz. (680 g) willinut Antenna Suppiied Accessories Telescoping Antenna. AC Adapter Specifications are typicai; indiwdual units might vary. Specifications are subJeCi 10 change and improvamenl without notice. Page 48
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Modify Date : 1999:11:11 16:01:48-06:00 Create Date : 1999:11:11 16:01:23-06:00 Creator : Acrobat 4.0 Scan Plug-in for Windows Producer : Acrobat 4.0 Scan Plug-in for Windows Page Count : 48EXIF Metadata provided by EXIF.tools