| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 154848 |
| Application ID | 7ZK98Mbw0aokWlfUHrwQYA== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 8.47kB (105929 bits) |
| Date Submitted | 2001-06-14 00:00:00 |
| Date Available | 2001-06-14 00:00:00 |
| Creation Date | 2001-04-20 13:16:19 |
| Producing Software | Acrobat PDFWriter 4.05 for Windows |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | æ©¡20-466-OM-DRAFT_FCC.PDF |
| Document Creator | æ©¡Microsoft Word |
| Document Author: | æ©¡CAD1 |
20-466 Owner’s Manual
RadioShack LOGO
www.radioshack.com SM
PRO-2053
Base Scanner
Owner’s Manual
Please read before using this equipment.
Contents
Will add
© 2001 RadioShack Corporation.
All Rights Reserved.
RadioShack, RadioShack.com, and Adaptaplug are registered trademarks used by Tandy Corporation.
Hypersearch and Hyperscan are trademarks used by Tandy Corporation.
Motorola, Smartnet and Privacy Plus are registered trademarks of Motorola Inc.
EDACS is a registered trademark of GE/Ericsson Inc.
Features
Your RadioShack Base Scanner is one of a new generation of scanners designed to track Motorola® Type
I and II (such as Smartnet® and Privacy Plus®) and hybrid analog trunking systems, and GE/Ericsson
(EDACS®) type systems, which are extensively used in many communication systems.
Trunking communications systems let a large group of 2-way radio users (or even different groups of 2way radio users) efficiently use a set of frequencies. Instead of selecting a specific frequency for a
transmission, the user simply selects a talk group. The trunking system automatically transmits the call on
the first available frequency, and also sends a code that uniquely identifies that transmission.
Since the trunking system might send a call and its response on different frequencies, it is difficult to listen
to trunked communications using a regular scanner. The scanner monitors the data sent with a 2-way
radio transmission, so you can hear the call and response for that user and more easily “follow” the
conversation.
The scanner also lets you scan conventional transmissions, and is preprogrammed with service search
banks for convenience. By pressing a single button, you can quickly search those frequencies most
commonly used by public service and other agencies without tedious and complicated programming.
This scanner gives you direct access to over 59,000 frequencies including those used by police and fire
departments, ambulance services, government agencies, air, and amateur radio services.
Your scanner includes these features:
Page 1
20-466 Owner’s Manual
Simultaneous Trunking Operation – tracks two trunking systems (Motorola and EDACS) and conventional
systems at the same time.
10 Channel-Storage Banks – let you store 30 channels in each bank (300 channels) to group channels so
calls are easier to identify.
10 ID-Storage banks – let you store 1,000 IDs in 10 ID banks, 5 sub-ID banks, 20 IDs are programmed in
each 5 sub-ID banks and let you easy identify the ID code.
12-Character, 4-Line, Dot-Matrix Display – shows you detailed operating information and lets you easily
program the scanner.
Weather Alert – automatically sounds the alarm tone to advise of hazardous weather conditions when it
detects the alert signal on the local National Oceanic and Atmospheric Administration (NOAA) weather
channel during priority operation.
Digital Weather Alert – displays the weather event text with three alert levels so you can see and hear the
reason for the alert.
Preprogrammed Frequency Ranges – lets you search for transmissions within preset frequency ranges or
within ranges you set, to reduce search time and select interesting frequencies more quickly.
Data Cloning – lets you transfer the programmed data to another PRO-2053 or PRO-93 scanner. You can
also upload or download the programmed data to or from a PC using an optional interface kit.
Triple Conversion Superheterodyne Receiver – virtually eliminates any interference from intermediate
frequency (IF) images, so you hear only the frequency you select.
Hyperscan TM and Hypersearch TM – the scanner scans and searches at up to 60 steps per second, to
help you quickly find interesting transmissions.
Scan Delay – delays scanning for about 2 seconds before moving to another channel in conventional
mode, so you can hear more replies that are made on the same channel.
Priority Channel – you can set the scanner to check one channel every 2 seconds so you do not miss
important calls.
Signal Attenuation (Attenuate) – lets you program in your scanner to reduce the scanner’s sensitivity to
strong local signals, to reduce interference or noise caused by these signals.
Text Input – lets you input a text label for each channel, talk group ID, bank, or other memory location so
you can easily know about the transmission you are hearing.
Lock Out Function – lets you set your scanner to skip over specified channels or frequencies when
scanning or searching, and skip over IDs when tracking trunked systems.
Page 2
20-466 Owner’s Manual
Key Lock – lets you lock the scanner’s keys to help prevent accidentally changing the scanner’s
programming.
Telescoping Antenna – lets the scanner receive strong local signals.
External BNC Antenna Connector – lets you connect an external antenna (not supplied) to the scanner.
Memory Backup – keeps the frequencies stored in memory for an extended time even without internal
batteries.
Supplied Police Call Trunking Guide – provides a quick reference to public safety trunking radio systems in
the United States.
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
Your scanner can receive these frequencies:
. 25—54 MHz
. 108—136.9875 MHz
. 137—174 MHz
. 216—225 MHz
. 406—512 MHz
. 806—823.9875 MHz
. 849—868.9875 MHz
. 894—960 MHz
. 1240—1300 MHz
This Owner’s Manual also includes the section “A General Guide to Scanning” on Page XX to help you
target frequency ranges in your service area so you can search for a wide variety of transmissions.
FCC NOTICE
Your scanner might cause TV or radio interference even when it is operating properly. To determine
whether your scanner is causing the interference, turn off your scanner. If the interference goes away, your
scanner is causing the interference. Try the following methods to eliminate the interference.
. Move your scanner away from the TV or radio.
. Connect your scanner to an outlet that is on a different electrical circuit from the TV or radio.
. Contact your local RadioShack store for help.
If you cannot eliminate the interference, the FCC requires that you stop using your scanner.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions: (1)
this device must not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
SCANNING LEGALLY
Page 3
20-466 Owner’s Manual
Scanning is a fun and interesting hobby. You can hear police and fire departments, ambulance services,
government agencies, private companies, amateur radio services, aircraft, and military operations. It is
legal to listen to almost every transmission your scanner can receive. However, there are some electronic
and wire communications that are illegal to intentionally intercept. These include:
. telephone conversations (cellular, cordless, or other private means of telephone signal transmission)
. pager transmissions
. scrambled or encrypted transmissions
According to the Federal Electronic Communications Privacy Act (ECPA), as amended, you could be fined
and possible imprisoned for intentionally listening to, using, or disclosing the contents of such a
transmission unless you have the consent of a party to the communication (unless such activity is
otherwise illegal). These laws change from time to time and there might be state or local laws that also
affect legal scanner usage.
Preparation
POWER SOURCES
Using AC Power
You can power the scanner using the supplied 12V, 500mA AC adapter.
Cautions:
.! You must use a Class 2 power source that supplies 12V DC and delivers at least 500 mA. Its center tip
must be set to positive and its plug must fit the scanner’s DC12V jack. The supplied adapter meets these
specifications. Using an adapter that does not meet these specifications could damage the scanner or the
adapter.
. Always connect the AC adapter to the scanner before you connect it to AC power. When you finish,
disconnect the adapter from AC power before you disconnect it from the scanner.
Warning: To prevent electric shock, do not use the AC adapter’s polarized plug with an extension cord,
receptacle, or other outlet unless you can fully insert the blades to prevent blade exposure.
Follow these steps to power the scanner from a standard AC outlet.
1. Insert the AC adapter’s barrel plug into the DC12V jack on the back of the scanner.
2. Plug the adapter into a standard AC outlet.
Using Vehicle Battery Power
You can power the scanner from a vehicle’s 12V power source (such as a cigarette-lighter socket) using a
DC cord with a size M Adaptaplug connector (neither supplied). Both are available at your local
Page 4
20-466 Owner’s Manual
RadoShack store.
Cautions:
! You must use a power cord that can carry 12V DC and at least 500 mA. Its center tip must be set to
positive and its plug must fit the scanner’s DC 12V jack. Using a cord that does not meet these
specifications could damage the scanner or the cord.
. Always connect the DC cord to the scanner before you connect it to the power source. When you finish,
disconnect the cord from the power source before you disconnect it from the scanner.
Follow these steps to power the scanner from a vehicle’s cigarette-lighter socket.
Add illust
1. Set the center chip positive (+).
2. Insert the cord’s barrel plug into the DC 12 V jack on the back of the scanner.
3. Plug the cord into the vehicle’s cigarette-lighter socket.
Notes:
. If the scanner does not operate properly when you connect a DC adapter, unplug the DC adapter from
the cigarette-lighter socket and clean the socket to remove ashes and other debris.
. If you use a 12V DC cord and your vehicle’s engine is running, you might hear electrical noise on the
scanner caused by the engine. This is normal.
. Mobile use of this scanner is unlawful or requires a permit in some areas. Check the laws in your area.
CONNECTING THE ANTENNA
Connecting the Supplied Antenna
You must install an antenna before you can operate the scanner.
The supplied telescoping antenna helps your scanner receive strong local signals. To install the antenna,
thread it clockwise into the hole on top of the scanner.
Add illust
The scanner’s sensitivity depends on its location and the antenna’s length. For the best reception of the
transmissions you want to hear, adjust the antenna’s length according to the chart below.
Frequency
Antenna Length
---------------------------------------------------------------------------25-54 MHz
Extend fully
108-174 MHz
Extend 4 segments
216-225 MHz
Extend 3 segments
Page 5
20-466 Owner’s Manual
406-1300 MHz
Collapsed fully
Connecting an Outdoor Antenna
Instead of the supplied antenna, you can connect an outdoor base-station or mobile antenna (neither
supplied) to your scanner. Your local RadioShack store sells a variety of antennas. Choose the one that
best meets your needs.
When deciding on an outdoor antenna and its location, consider these points.
When deciding on an outdoor antenna and its location, consider these points:
. The antenna should be located as high as possible.
. Then antenna and antenna cable should be as far as possible from sources of electrical noises
(appliances, other radios, and so on).
. The antenna should be vertical for the best performance.
To connect an optional base-station or mobile antenna, first remove the supplied antenna from the scanner.
Always use 50 ohm coaxial cable, such as RG-58 or RG-8, to connect the base-station or mobile antenna.
For lengths over 50 feet, use RG-8 low-loss dielectric coaxial cable. If the antenna’s cable does not have a
BNC connector, you will also need a BNC adapter (also available at your local RaddioShack store). Your
local RadioShack store carries a wide variety of coaxial antenna cable and connectors.
Once you choose an antenna, follow the mounting instructions supplied with the antenna. Then route the
antenna’s cable to the scanner and connect the cable to the ANT connector.
Warning: Use extreme caution when installing or removing an outdoor antenna. If the antenna starts to fall,
let it go! It could contact overhead power lines. If the antenna touches a power line, contact with the
antenna, mast, cable or guy wires can cause electrocution and death! Call the Power Company to remove
the antenna. Do not attempt to do so yourself.
Caution: Do not run the cable over sharp edges or moving parts that might damage it.
CONNECTING AN EARPHONE/HEADPHONES
For private listening, you can plug an earphone or mono/stereo headphones (not supplied), available at
your local RadoShack store, into the (headphone symbol) front on top of your scanner. This automatically
disconnects the internal speaker.
Add Illust
Listening Safely
To protect your hearing, follow these guidelines when you use an earphone or headphones:
. Do not listen at extremely high volume levels. Extended high-volume listening can lead to permanent
hearing loss.
Page 6
20-466 Owner’s Manual
. Set the volume to the lowest setting before you begin listening. After you begin listening, adjust the
volume to a comfortable level.
. Once you set the volume, do not increase it. Over time, your ears adapt to the volume level, so a volume
level that does not cause discomfort might still damage your hearing.
CONNECTING AN EXTENSION SPEAKER
In a noisy area, an external speaker (not supplied), available at your local RadioShack store, might provide
more comfortable listening. Plug the speaker cable’s 1/8-inch (3.5 mm) mini-plug into your scanner’s
speaker jack on the back. This automatically disconnects the internal speaker.
Add Illust
CONNECTING THE CLONE CABLE
You can transfer the programmed data to and from another PRO-2053 or PRO-93 using the clone cable
(not supplied). We recommend to use RadioShack Cat. No. 42-2420. Connect the cable between each
scanner’s PC/IF jacks. See “Cloning the Programmed Data from Scanner to Scanner” on Page XX. You
can also upload or download the programmed data to or from a PC using an optional PC interface kit
available by special order from your local RadioShack store.
About Your Scanner
Once you understand a few simple terms used in this manual and familiarize yourself with your scanner’s
features, you can put the scanner to work for you. You simply determine the type of communications you
want to receive, then set the scanner to scan them.
A frequency is the receiving signal location (expressed in kHz or MHz). To find active frequencies, you can
use the search function.
You can also search the SEARCH banks, which are preprogrammed frequencies in the scanner’s memory
(see “Searching a Preprogrammed Frequency Range” on Page XX for the frequency list). You can change
the SEARCH frequency ranges in search bank 5.
When you find a frequency, you can store it into a programmable memory location called a channel, which
is grouped with your other channels in a channel-storage bank. You can then scan the channel-storage
banks to see if there is activity on the frequencies stored there. Each time the scanner finds an active
frequency, it stays on that channel until the transmission ends. See “Trunking Operation” on Page XX for
terms related to trunking systems.
A LOOK AT THE KEYPAD
Your scanner’s keys might seem confusing at first, but this information should help you understand each
key’s function.
Page 7
20-466 Owner’s Manual
Illust
SCAN – scans through the programmed channels.
FUNC (function) – lets you use various functions by pressing this key along with other keys.
MAN – stops scanning and lets you directly enter a channel number.
WX – scans through the 7 preprogrammed weather channels.
TRUNK – stores the trunking ID code or holds the trunking ID while scanning.
PRI (Priority) – sets and turns the priority function on or off.
TUNE – lets you input a frequency and allows you to fine tune a frequency along with /¥ or ¥/.
ATT (Attenuate) – turns attenuation on to reduce the scanner’s sensitivity, or turns it off to increase it.
TEXT – lets you input text.
PAUSE – stops search or scan.
/¥ or ¥/ – selects the search direction during frequency search or tuning.
L/OUT (Lock Out) – lets you lock out a selected channel, skip a specified frequency during search, or lock
out a selected ID code.
CLEAR – clears an incorrect entry.
MODE – changes the receive mode (AM, FM, MO, ED). See “Changing the Receive Mode” on Page XX.
SEARCH – lets you search the ten search banks.
PROG – programs frequencies into channels.
1 – enters a 1, or inputs characters 0 through 9.
2/ABC – enters a 2, or inputs characters A, B, or C.
3/DEF – enters a 3, or inputs characters D, E, or F.
4/GHI – enters a 4, or inputs characters G, H, or I.
5/JKL – enters a 5, or inputs characters J, K, or L.
6/MNO – enters a 6, or inputs characters M, N, or O.
7/PQRS – enters a 7, or inputs characters P, Q, R, or S.
8/TUV – enters a 8, or inputs characters T, U, or V.
Page 8
20-466 Owner’s Manual
9/WXYZ – enters a 9, or inputs characters W, X, Y, or Z.
0 – enters a zero, or inputs characters . , -, #, _, @, +, *, &, /, ‘, $, %, !, ^, (, ), ?, ->, `, and <-.
./DELAY – enters a decimal point (necessary when programming frequencies), space, or programs a 2second delay for the selected channel/search bank, or hyphen (in Motorola type I code setting).
ENTER – lets you complete the entry of frequencies and text.
A LOOK AT THE DISPLAY
Add illustration
UNDERSTANDING BANKS
Channel Storage Banks
To make it easier to identify and select the channels you want to listen to, channels are divided into 10
banks (0—9) or 30 (00 to 29) channels each. Use each channel-storage bank to group frequencies, such
as those used by the Marine, CB, Police, Fire, Aircraft and Ham (see “Typical Band Usage” on Page XX).
For example, police department might use four frequencies, one for each side of the town. You could
program the police frequencies starting with 000 (the 1st channel in bank 0) and program the fire
department frequencies starting with 100 (the 1st channel in bank 1). The 1st digit identifies the bank (0-9).
The 2nd and 3rd digits identify the channel within the bank (00-29).
Search Banks
This scanner has five preprogrammed search bands plus one limit search band. You can set the lower and
higher frequency limit in limit search band. (For the default setting, see “Searching a Preprogrammed
Frequency Range” on Page XX.)
UNDERSTANDING YOUR SCANNER’S MODES
You can program each channel with any of four receive modes except VHF band. Each mode affects how
your scanner operates when scanning and receiving transmissions, and also affects what transmissions
you receive when you set the scanner to the closed mode (see “Open and Closed Modes” on Page XX).
The following sections describe each mode and how they affect your scanners operation. See “Changing
the Receive Mode” on Page XX.
In all major metropolitan areas of the United States, every available radio channels is assigned to more
than one user. Public safety radio systems on the same frequency are usually set up at a distance of 40
miles apart, or more. This means that you may hear transmissions from a distant system when your local
system is not transmitting.
Open and Closed Modes
Page 9
20-466 Owner’s Manual
You can set your scanner to change the way it receives signals. These settings, called open mode and
closed mode, affect how the scanner receives signals from communications systems that use some type
of closed squelch (such as MOT, and ED systems).
You can set each of the scanner’s channel storage banks to open or closed mode.
In open mode, the scanner scans signals transmitted in all systems. In closed mode, the scanner scans
signals transmitted only under the following conditions:
. When the signals are in the FM mode.
. When the signals are in the MO, or ED mode and the signal’s ID code matches the programmed ID code.
You can also select the users or talk groups you want the scanner to receive in closed mode.
When you set a channel storage bank to open mode, + (open) appears under the bank’s number while
scanning. When you set a channel storage bank to closed mode, - (closed) appears under the channel
storage bank’s number while scanning. Or, OPEN or CLOSED appears while the scanner is in manual
mode or while the scanner is receiving a signal during scanning.
See “Changing the Open/Closed Mode” on Page XX for more information about setting the open and
closed modes.
AM Mode
This sets the scanner to receive transmissions using amplitude modulation (AM). AM is used for aircraft,
military, some amateur radio, and some government transmissions. When the scanner receives a
transmission on a channel set to the AM mode, it always stops on the transmission.
FM Mode
This sets the scanner to receive transmissions using frequency modulation (FM). FM is used for most
public safety transmissions, as well as broadcast, business, and amateur radio transmissions. When the
scanner receives a transmission on a channel set to the FM mode, it always stops on the transmission.
Motorola Mode
You can set your scanner so it decodes the talk group IDs used with Motorola trunking systems. This
setting is called the Motorola mode.
Motorola systems are trunking systems used primarily by business and public safety groups to efficiently
allocate a small number of frequencies (as few as 5) to many groups of users (as many as several
thousand). To do this, each group of users in the system is assigned to a specific talk group. For example,
the east side patrol officers might all be assigned to talk group 2160. One channel in the system is
continuously transmitting data that identifies which talk groups are active on which channel. In addition,
this talk group information is also transmitted as subaudible data on each active channel.
Page 10
20-466 Owner’s Manual
When the scanner receives a transmission on a channel set to the Motorola mode, it first decodes the talk
group ID data included with the transmission. In the open mode, the scanner stops on the transmission
and displays the talk group ID on the bottom line of the display. In the closed mode, the scanner only stops
on the transmission if the talk group ID matches a talk group ID that you have stored in the bank’s talk
group ID list and have not locked out.
Motorola trunking systems come in three categories: Type I, Type II, and Type I/II Hybrid. Each category
displays and uses talk group IDs in slightly different ways.
Motorola Type I IDs are in the form FFF-SS, where:
FFF=Fleet ID
SS=Subfleet ID
Type I systems are usually organized with different user groups assigned to different fleets. For example, a
valid fleet/subfleet ID identifying all detectives within a police department might be 000-12, where 000
identifies all police users and 12 identifies the Detective division.
To properly map the raw Type I data to the correct fleet-subfleet format, you must program the correct fleet
map into the scanner. Fleet map information is widely available on the Internet for most Type I systems in
use.
Type II system talk groups are identified by a 5-digit number. Valid talk group IDs are divisible by 16. If you
try to enter an invalid talk group ID, the scanner rounds the ID down to the next valid ID.
Type I/II hybrid systems use both fleet-subfleet and 5-digit formats for talk group IDs.
Note: If the scanner decodes control channel data while receiving transmissions from a Motorola trunking
system, CNTRL appears on the bottom line of the display.
EDACS Mode
You can set your scanner so it decodes the talk group IDs used with EDACS (GE/Ericsson) trunking
systems. This setting is called the EDACS mode.
EDACS systems are trunking systems used primarily by business or private communications service
providers, as well as by some public safety organizations. EDACS systems transmit active talk group
information only on a dedicated control channel.
EDACS frequencies are organized in a specific order. Each frequency is assigned a Logical Channel
Number (LCN). For the scanner to correctly switch to an active frequency, you must program the
frequencies in LCN order, starting with Memory 01. EDACS talk group IDs are entered as a 4-digit decimal
number from 0001 to 2047 or AFS (Agency Fleet Subfleet) number from 00-001 to 15-157.
When there is activity on an EDACS system, that information is sent out on the control channel. The
scanner decodes the ID for the active talk group. In the open mode, the scanner then goes to the
transmission and displays the talk group ID on the bottom line of the display. In the closed mode, the
Page 11
20-466 Owner’s Manual
scanner only goes to transmissions with IDs that match talk group IDs you have stored in the bank’s talk
group ID list which are not locked out.
Because EDACS scanning requires clear reception of the control channel at all times, EDACS systems
tend to have a smaller usable area. An external antenna can greatly improve EDACS scanning in a fringe
area. If you are having trouble scanning an EDACS system, try manually selecting the data channel. If you
are getting good reception, the scanner will indicate talk group CTL-01. Try changing your location or using
an outdoor antenna to improve reception.
Operation
TURNING ON THE SCANNER AND SETTING SQUELCH
1. Turn SQUELCH fully counterclockwise until the indicator points to MIN before you turn on the scanner.
Add illust
2. To turn on the scanner, turn VOLUME clockwise. Welcome To Dual Trunking appears. After about 3
seconds, you hear a hissing sound.
3. Turn SQUELCH clockwise, just until the hissing sound stops.
4. To turn off the scanner when you finish, turn VOLUME counterclockwise to OFF.
Notes:
• The scanner does not scan if there are no frequencies stored in channels. If the scanner does not scan
and you have already stored frequencies in channels, turn SQUELCH further clockwise.
• If the scanner picks up unwanted, partial, or very weak transmissions, turn SQUELCH clockwise to
decrease the scanner’s sensitivity to these signals. If you want to listen to a weak or distant station, turn
SQUELCH counterclockwise.
• If SQUELCH is adjusted so you always hear a hissing sound, the scanner will not scan properly.
• To ensure the scanner operates properly while in the trunking mode, we suggest you set SQUELCH
using the above steps, even if the scanner is automatically muted.
STORING KNOWN FREQUENCIES INTO CHANNELS
Good references for active frequencies are RadioShack’s Police Call, Aeronautical Frequency Directory,
and Maritime Frequency Directory. We update these directories every year, so be sure to get a current
copy. Also see the supplied Police Call Trunking Guide.
Follow these steps to store frequencies into channels.
1. Press MAN, enter the channel number where you want to store a frequency, then press MAN again. M
and the channel number appear at the upper left corner of the display (for example: M100).
Add illust
Page 12
20-466 Owner’s Manual
Notes:
You can also select your desired bank and channel number by follow those steps while program mode.
1). Press FUNC then press /¥ or ¥/. The bank number moves upward (downward).
2). Press FUNC then press and hold /¥ or ¥/. The bank number moves continuously upward (downward).
3). Press PROG or /¥. The channel number moves upward one by one.
4). Press ¥/. The channel number moves downward one by one.
2. Press PROG. M changes to P.
3. Use the number keys and •/DELAY to enter the frequency (including the decimal point) you want to
store.
If you make a mistake, press CLEAR to delete a single digit and press and hold CLEAR about 2 seconds
to delete all digits.
4. Press ENTER to store the frequency into the channel. The blinking cursor disappears.
Notes:
• If you made a mistake in Step 3, Invalid Freq briefly appears and the scanner beeps when you press
ENTER. Starts again from Step 3.
• Your scanner automatically rounds the entered frequency to the nearest valid frequency. For example, if
you enter a frequency of 151.553, your scanner accepts it as 151.550.
• Press •/DELAY to turn the delay function on or off. To have the scanner pause for 2 seconds on this
channel after a transmission before proceeding to the next active transmission, see “Using the Delay
Function” on Page XX. The scanner stores this setting in the channel.
• If you are storing frequencies for an EDACS system, you must store them in logical channel number
order, with the first frequency in channel 1 for the current bank.
5. If necessary, press MODE to change the receiving mode.
6. If desired, program a text tag for the channel (see “Assigning a Text Tag to a Channel”).
7. The next channel in sequence is ready for programming. Press PROG and then repeat Steps 3 through
6.
以下を STORING KNOWN FREQUENCIES INTO CHANNELS の次に入れる
STORING TRUNKING FREQUENCIES INTO CHANNELS
1. Press PGM and FUNC then up or down to select desired bank to program.
2. Press TRUN to trunking mode.
3. Press MODE and selects Mo or ED.
4. Press PGM and selects the channel number where to enter with up or down key or numeric key.
5. Enter UHF trunking frequency and press ENTER.
6. Repeats step 4 and 5 to complete enter the trunking frequency group.
In above steps the same receiving mode set at above step 3 is repeated.
7. If necessary press MODE and change the receiving mode.
Page 13
20-466 Owner’s Manual
STORING TEXT TAGS
You can customize your scanner by storing text tags (up to 12 characters) for easy identification of channel
transmissions, trunk IDs, or banks.
Assigning a Text Tag to a Channel
1. Press MAN, enter the channel number where you want to enter the text, then press MAN again. M and
the channel number appear at the upper left corner of the display (for example: M100).
2. Press PROG. M changes to P.
3. Press TEXT. The cursor appears at the 3rd line.
4. Enter the text using the numeral keys (see “Text Input Chart” on Page XX).
Note: If you make a mistake, press /¥ or ¥/ to move to the character you want to change.
For example input “HAM 6m” as follows:
• “H” is the second letter associated with 4 on the keypad. Press 4 then 2.
• “A” is the first letter associated with 2 on the keypad. Press 2 then 1.
• “M” is the first letter associated with 6 on the keypad. Press 6 then 1.
• “Space.” Press • .
• “6” is the sixth number associated with 1 on the keypad. Press 1 then 6.
• “m” is the first letter associated with 6 on the keypad. Press 6 and FUNC (for the lower case set), then
press 1.
5. Press ENTER to input the text.
Assigning a Text Tag to a Bank
1. Select a channel within the desired bank by pressing MAN and entering the bank number (000 for bank
0 or 200 for bank 2, for example). Press MAN again.
2. Press PROG.
3. Press FUNC then 7. The cursor appears at the 3rd line of the display. Enter the text using the keypad
and press ENTER.
Text Input Chart
Notes:
• To access the numbers, after you press TEXT or you press FUNC and 6, press 1, then press the desired
number you want to enter.
• To enter a lowercase character or a character from the second set for key 0, press FUNC after pressing
Page 14
20-466 Owner’s Manual
the first numeral key.
Press
FUNC after press 2
FUNC after press 3
FUNC after press 4
FUNC after press 5
FUNC after press 6
FUNC after press 7
FUNC after press 8
FUNC after press 9
FUNC after press 0
•
CL
To Enter Character from this Group
1234567890
ABC
abc
DEF
def
GHI
ghi
JKL
jkl
MNO
mno
PQRS
pqrs
TUV
tuv
WXYZ
wxyz
.-#_@+*&/‘
$ % ! ^ ( ) ? -> `
Source Exif Data:
File Type : PDF
File Type Extension : pdf
MIME Type : application/pdf
PDF Version : 1.2
Linearized : No
Page Count : 45
Creator : .橡.Microsoft Word
Create Date : 2001:04:20 13:16:19
Title : .橡.20-466-OM-DRAFT_FCC.PDF
Author : .橡.CAD1
Producer : Acrobat PDFWriter 4.05 for Windows
EXIF Metadata provided by EXIF.tools