Radio Shack 4302105 900MHz 10 Channel Analog Modulation Earpiece Phone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	163652
Application ID	RK+JEB0NivKl0pVqhuuNBA==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	31.79kB (397405 bits)
Date Submitted	2001-08-08 00:00:00
Date Available	2001-08-08 00:00:00
Creation Date	2001-06-05 17:22:13
Producing Software	Acrobat 4.0 Scan Plug-in for Windows
Document Lastmod	2001-06-05 17:22:39
Document Title	User manual
Document Creator	Acrobat 4.0 Scan Plug-in for Windows

%% ‘ (JG dT-Zluslm l'ngel Mnndny, April 21m” mum é j .
fl ET-2105 a»
900 MHz Hands-free Phone l
OWNER'S MANUAL — Please mm below using this equipment.
FEATU Fl ES
Your Radioshack 900 MHz Hands-tree Phone combines the clar-
ity at 900 MHz communication with portability and convenience.
The phone’s cordless keypad clips to your hell or clothing so you
can make and answer calls away trom the base The earphone
with microphone lets you keep your hands Iree while you talk,
Your phone has these tealures:
Ample Talk and Standby Tlme —when fully charged (about 12
hours). the supplied battery provndes about 7 hours at talk time or
7 days of standby time.
Ten-Memory Speed Dlll — stores up to len frequently celled
phone numbers tor easy dialing. ’
Ten-Channel Auto Soon — automalically selects a clear channel
when you make or answer a call.
Security Access-Protection Code — prevents other cordless
phone users from using your phone line. Each time you place the
keypad on the base. the keypad aulornatlcally sets a new security
access-protection code,
Volume Control — lets you oontrol the volume 01 the sound you
hear through the earphone,
e not Mam taper-um,
®Radio5hack. mm.mz"mm,..,.m.
st to
wwwndimhack (qm' unit by mum-cu corp-wallow.
0 We fie 4?)
%% ‘éf 4.1.2“me mu Mmulay.Apl
if
Page — leis you send a paging signal from the base to the key-
pad to help locale a misplaced keypad or page someone al me
keypadi
Deiachahla Belt Clip — leis you carry me keypad on your ball or
clothing lor easy portability
Earphone Cumparimenl with Cover— leis you more the ear»
phone when no! in use.
| Neck Strap Hole — lets you thread a neck strap (not supplied)
through the keypad and hang the keypad around your neck.
Your phone is ETL listed to UL standards and meets all applicable
FCC standards.
WARNlNG: To reduce me risk oi lire or shock hazard do not ex-
pose this product to ram of morslure.
moFWlwwu
nonovomc
CAUT|°N2 TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER OH BACK. N0 USERSERVICEABLE
PARTS iNSIDE. REFER SERVICING TO QUALIFIED PERSON-
NEL4
This symbol ls Inlended to clot! you to me pres-
ence oi uninsulaled dangerous vollage wllhin me
product's enclosure mat mig’u be of sufliciam
magnitude to consilluie a risk oi electric shock
Do ml open me product's case.
{GE} dl-ZIUSJm Page] Mnndny,Apri12J.2i.K)l Nat/mt ’ é ’ .
This symbol i "tended to inform you that Impor- I
ZS tanl operating and malntenance itslructicns are
incmded in the literature accompanying lhls prod-
um,
READ THIS BEFORE INSTALLATION
We have designed your phone to contorm to lederal regulations,
Q) and you can connect it to most telephone lines. However, each
phone (and each device, such as a telephone or answering ma-
chine) that you connect to the telephone line draws power from
the telephone line. We reter to this power draw as the device‘s
ringer equivalence number, or REN The HEN is on the bottom at
| your phone’s base.
It you use more than one phone or other device on the line. add
up all of the RENs. ll lhe total Is more than live (orthree in mrel ar-
1} eas). your telephones might not ring. ll ringer operation is im-
paired, remove a device from the line.
Your phone oomplles with Part 68 of FCC Flu/es. You must. upon
request, provide the FCC registration number and the REN to
your telephone company. Both numbers are on the bottom at your
| phone’s beset
Note: You must not connect your phone to:
- coin-operated systems
- party-line systems
- most electronic key telephone syslems
important: 6?—
- Cordless phones such as this one require AC power to oper»
ate. When the AC power is otf, you cannot dial out or receive
incoming calls using your phone For this reason, the phone
should not be your only telephone To be safer you should
also have a phone that does not require AC power to operate
(not a cordless phone) so you can still make and receive calls
it there is an AC power taiiuret
- Some cordless phones operate at irequencies that might
cause interierence to nearby TVs and VCRst To minimize or
prevent such interterenoe, the base oi the cordless phone
should not be placed near or on top at a TV or VCR.
- Vour cordless phone operates on standard radio treouencies,
as allocated by the FCC. Even though your phone's access
, protection code prevents unauthorized use oi your phone
\ Ii ne. it is possible tor other radio units operating on similar ire-
ouencies within a certain area to unintentionally intercept
your conversations and/or cause interierenoe. This possible
lack ol privacy can occur with any cordless phone.
THE FCC WANTS YOU TO KNOW
/ In the unlikely event that your phone causes problems on the
L) i phone line. the phone company can temporarily discontinue your
service It this happens. the phone company attempts to notify you
in advance ii advance notice Is not practical. the phone company
notifies you as soon as possible and advises you oi your right to
file a complaint with the FCC.
% fig Alrzlllitm Pages Monday.Ap-i|n,2()m 9:44AM efif ‘ .
Also. the phone company can make changes to its lines. equip-
ment, operations, or procedures that oould alfea the operation at
this telephone. The telephone oompany notifies you of these
changes in advance. so you can take the necessary steps to pre-
vent interruption at your telephone service.
LIGHTNING
Your telephone has builtin protection circuits to reduce the risk of
damage lrorn surges in telephone line and power line current.
These protection circuits meet or exceed the FCC requirements.
However. lightning striking the telephone or power lines can dam-
age your telephone.
Lightning damage is not common. Nevertheless, it you live in an
area that has severe electrical storms, we suggest that you unplug
your phone when storms approach to reduce the possibility of
damage. 1
FCC STATEMENT
The phone complies with the limits tor a Class B oigltal device as
specified in Part 15 of FCC Rules. These Iimlts provide reason-
able protectlon against radio and TV interference in a residential
area. However. your equipment might cause TV or radio interier-
ence even when it is operating properly. To eliminate inlerlerenca,
you can try one or more a! the following oorrective measures:
~ Reonent or relocate the receiving antenna.
- Increase the distance between the equlpment and the radio
or TV.
ii“ are we
% fl) 4321051". Pngefi Monday.ApriI23.2tX)l 9:44 AM \4@ .
- Use outlets on different electrical circuits for the equipment
and the radio or TV,
Consult your local RadioShack store it the problem Sll" exists.
PREPARATION
Selecting a Location
You can place the phone‘s base on a flat surface such as a desk,
shell, or table.
Select a location that is:
- near an easily accessible Ac outlet
l - near a telephone line jack
—@- - out of the way of normal activities
I ~ away from electrical machinery. electrical appliances, metal r
walls, tillng cabinets wireless intercoms. security alarms. and
room monitors
The bese‘s location attests the phone’s range. It you have a
choice at several locations, try each to see which prcwdes the
best performance
Caution: The supplied AC adapler was designed specifically for
your phone. Use only the supplied adapter.
Your telephone connects directly to a modular telephone Ilne Jack,
If your telephone wrring does not have a modular jack, you can
update the wlring yourself using jacks and adapters lavailable at
your local RadicSheck store), or have the telephone company up-
;l 5 g
we as not
4h
date the wiring to! you. You must use compatible modular jacks r
G that are compttant with Part so 01 FCC Rules. ‘
105 I'm Png=7 Mnndny,A[ii1212wl mu AM é I .
Note: The USOC number oi the jack to be installed is RM 1 C.
CONNECTING THE BASE
You can power the base using the supplied 12V, 200 mA AC/DC
adapter.
Cautions:
12V DC and delivers at least 200 mA. its center tip
must be set to positive and its plug must fit the
phone's DC 12V zoom/t iaokt Tho supplied adapter meets
these specifications. Using an adapter that does not meet
these specifications could damage the phone or the adapter. ,
: You must use a Class 2 power source that supplies
0 Always connect the AC adapler to the phone betore you con-
nect it to AC power. When you tinlsh, dlsoonnect the adapter
trom AC power before you dlsconnect it trom the phone.
Follow these steps to connect the base to a phone Ilne and AC
power:
1. Plug one end at the supplied modular cord into the TEL LINE
tack on the back ot the base,
2. Plug the modular oord's other end into a modular phone line
jack.
3. Insert the supplied AC adapter's barrel plug into the Do 12V
200mA iack on the back 0! lhe base.
4. Plug the adapter into a standard AC outlet.
44 } 7
O 69— $
~+
%} 5. Lift the base's antenna to a vertical position.
Connecting, Charging, and
Replacing the Battery Pack
The phone comes with a rechargeable NiMH battery pack. Vou
must connect the battery pack and charge it tor at least 12 hours
betore you use the phone tor the first n’me.
1. Press down and slide sit the battery pack compartment cover.
2. ert the battery pack out of the compartment.
3. Plug the battery pack‘s connector into the sodtel in the com-
| partment (the connector fits only one way), then replace the
battery pack.
4. Replace the cover.
—+ h-
1’ To charge the battery pack. piece the keypad taceup on the base.
The CHARGE/IN USE indicator lights.
Notes:
~ Recharge the battery pack it the keypad beeps and the W
USE/LOW EA'I'I‘ indicator on the keypad flashes white you
are using the phone. or it the IN USE/LOW BA't'r indicator
flashes when the phone is not in use.
- When you first use the phone after charging or recharging the
battery pack. the phone mrghl not work. Return the keypad to
the base tor about 5 seconds to reset the security access-
prctectlon code
4m
4372105Jm Pngz! Monthy. April 21,2001 944m “43 ’ .
i“
IDSJm Pnge'} Monday. Apnl 21. at»; 9:44 AM QB ‘ .
A? ' It the CHARGE/IN USE indicator does not light when you é)“
place the keypad on the base, be sure the battery pack and l
AC adapter are correctly and securely connected. Also,
check the charging contacts on the keypad and base, It the
contacts are diny or tarnished, clean them with a pencil
ETBSEV.
- It the battery pack becomes completely discharged or the
base loses power while the keypad is away from it. place the
keypad on the base for about 5 seconds to reset the security
access-protection code It the keypad loses power. leave it on
the base to charge the battery park
- if you are not going to use your phone for an extended period
at time, disconnect its battery pack. The helps increase the
battery pack‘e me.
i} - When the keypad is on the base. the CHARGE/IN USE indi-
_<' cator lights even when the battery pack us not connected, ll
l your phone does not work. be sure the battery pack is prop-
erly connected
The supplled battery pack should last about a year, It the battery
| pack does not hold a charge tor more than 2 hours alter an over-
night charge, replace it with a new (ls-volt, 600 mAh battery pack
with a connector that fits the socket In the battery companrnent
You can order a replacement battery pack through your local Fla-
dioShack store
Note: To avoid losing numbers stored in memory. you must install
and begun charglng the new battery pack within 2 minutes ct re-
movmg the old one
Warning: Dispose ot the old battery pack promptly and properly.
i Do not burn or UU’Y it. 9 4L
Q 1 % Hf? fiffl %
’ QB 4.14mi rm Page in Monday. April 1mm mm m Q?) r .
Cautlcns:
- Be carelul not to short the battery pack by touching it with
conducting materials, such as rings. bracelets, and keys. The
battery pack or conductor might overheat and burn,
- Do not open or mutilate the battery pack
Il you have trouble replacing the battery pack, take the phone to
your Iooai HadtoShack store tor assistance.
Setting the Ringer
| OFF/ON mNGER, on the right side at the handset. controls the key—
pad ringer. To have the phone ring when a call comes in, slide
RINGER to ON To turn the ringer Ofl‘ Slida RINGER to OFF.
When RINGER is set to OFF, the phone does not ring, but you can
still make outgomg cells. It you heeren extension telephone ring.
you can answer the incoming call on this phone. The CHARGE/IN
USE indicator on the base and IN USE/LOW BA'I'I’ on the keypad
indicator flash until you answer the call.
Setting the Dialing Mode
Set TONE/PULSE on the back ol the base tor the type at service
you have. It you are not sure whlch type you have. do thls simple
test after charging the battery pack
1 Set TONE/PULSE lo YONE belore use.
2. Press TALK so the CHARGE/IN USE indicator lights than lis-
ten tor a dial tone.
3, Press any number other lhen o and I.
70
e?
$3?
0 WP fish 4? Q
:) 4172l05lm Page [I Munuuy.Ap-ilu.2wl 9.44AM
Note: If your phone system requires that you dial an access
code (9, lor example) beiore you dial an outside number, do
not press the access mode eilher,
ll the dial lane stops, you have touch-tone sen/lee, If lne dial
tone continues. you have pulse service
ll you have lane service, leave TONE/PULSE set to TONE. If
you have pulse service, eel TONElPuLsE to PULSE,
4. Tu hang up, place the keypad on lhe base or press TALK.
Using the Earphone
1 Insert the earphone's plug into the Q iack on the side of the
keypad.
2. Place the mono-earphone In either ear
3. Move the clip along the earphone cord and mm it to your
clothing
When you are not using the earphone, follow these steps:
1l Open the earphone compartment cover by pulling lls tabs on
both sidesl
a Place the earphone In the compartment.
Sr Close the compartment cover.
Uslng the Belt Clip
You can use the belt clip to hang the keypad on your belt or waist-
band for hands-free carrying. To attach the hen clip. snap the up-
$fo
‘l’k
% {4} «sins Fan Page 11 Mnnday.Apnl?J.2wl 9:44 AM
”i
per side at the clip into the slots on corn sides of the keypad. To
remove the belt clip, pull out on either side of the clip.
OPERATION
Betore you use the phone. place the earphone in either ear and
attach the clip to your clothing (see “Using the Earphone“ on
Page 11)
Making and Receiving Calls
To make a call, lift the keypad tram the base‘ then press TALK.
Vou hear a dial tone and the CHARGE/N USE indicator on the
base and the IN USE/LOW BATI' indicator on the keypad light.
Dial the number.
To answer a cell. lift the keypad trom the base, then press TALK,
The CHARGE/IN USE and IN USE/LOW BA'I'I' indicators light,
To end a call. place the keypad on the base or press TALK,
Notes:
- When you press a button. a single lone indicates that the
phone has accepted the command. Three tones Indicate that
you pressed a button in error or there is severe interlerence,
(See "Changing Channels").
~ Il interterence is severe. the keypad might lose communita-
lion with the base and the call mlght dlsconnect ll this hep~
pens‘ return the keypad lo lhe base for about 5 seconds to
reset the securlly access-protection code.
r2
ii
44?— 47>} ell?
%% I 4} 4172105 lm Page i] Monday,Apfil23,2lMll “4 AM
fly}
4»
This as
Adiusting the Keypad‘s Volume
To adjust the keypad's volume level (4 levels), repeatedly press
VOLUME v or A during a call until lhe sound level is comfort-
able. The volume level remains set even after you hang up.
Note: The keypad beeps 3 limes when you reach the iowest or
highest volume level.
Changing Channels
Every time you press TALK. lhe phone automatically selects a
clear channel it uses lor communication between the keypad and
the base. If you hear inlenerence during a call, repeatedly press
CH to change the channel until you get a clear one.
Using Fledial
To redial the last number dialed. press TALK then RENAL/PAUSE,
You can also redial a busy number quickly without hanging up the
phone. Press HEDIALIPAUSE, You hear a dial tone then the phone
automatically redlals the number.
Notes:
- The redlal memory holds up to 82 digits. so you can redial
long-distance as well as local numbers.
~ The reder memory can also store tone and pause entries
(see “Using Tone Services on a Pulse Line“ on Page 14 and
“Entering a Pause In a Memory Number” on Page 16).
%% {xx} 4372I05 fm Page N Mnndny,Apflil23.ml 9:44 AM é I .
Using Mute
To talk to someone else in the room without the person on the oth-
er end at the phone line hearing your conversation, press MUTE.
Press MUTE again to resume your phone conversation.
Using Flash
FLASH provides the electronic equivalent at a switchhook signal
tor special phone service such as Call Waiting.
For example. it you have Call Waiting, press FLASH to answer an
incoming call without disconneclmg the current mil. Press FLASH
again to return to the first calla
Note: It you do not have any special phone services. pressing
FLASH might disconnect your current cell.
fl.) Using Tone Services on a Pulse Line
Some special services. such as benk-by-pnone, require tone sig-
nals. If you have pulse service. you can still use these tone sen/ic-
ea by lollowing these steps:
1. Dial the service’s main number.
2. When the service answers. press TONE/* . Any additional
numbers you dial are sent as tone signals.
3. After you complete the call, press TALK or return the keypad
to the base. The phone automatically resets to pulse dialing,
,, £
% L 41.2“;er Page is Mnndny.Apfli123,201)l 9:44AM HJQJ .
Using Page ?
You can send a page to the keypad to locate it when it is away
irom the base and nut in use. To page the keypad, press PAGE!
FIND on the base. The keypad rings for about 15 seconds. To find
the keypad. press and hold PAGE/FIND. The keypad rings for
about 1 minute. Press any key on me keypad or PAGE/FIND on the
base to silence it sooner.
MEMORY DIALING
You can store up to ten numbers at 16 digits each in the phone's
memory.
Notes:
- To keep your accounts secure. we recommend you do not
,- store your personal atom code for services such as bank-
hy~phone in a memory location.
- When storing numbers ior special services (such as alternate
long-distance or bank-by~phone), store the service's main
phone number in one memory location and numbers tor addi-
tional iniormatlon in other locations.
Storing a Number in Memory
I 1. Press MEM on the keypad, The IN USE/LOW BATT indicator
flashes.
2. Dial the desired number iup to 16 digits Inotuding any pause
entries).
3. Press MEM again to store the number,
% {E 43410er Page 16 Mundfly.A|>|-5123.200I 9:44AM ($5 ’ .
‘T> 4. Press the memory location number (1—0) you want to store.
The keypad sounds two long beeps
Note: it you hear three short beeps, you did not store the
number successlully Begin again from Step L
5‘ Write down the stored name and number on the memory
label provided.
Note:
- It the low battery waming tone sounds while you are on the
phone and the IN USE/LOW BA'IT indicator flashes.
| recharge or install the battery within 2 minutes. or the phone
will not retain the numbers stored in memory (sea "Connect-
ing. Charging. and Replacing the Battery Pack“ on Page 8)
Qfi .
Il you receive a call whlle you are slonng a number in mem-
ory, press TALK to answer the call. Alter the call. begin again
at Step 1
‘ To change a number stored in memory, simply store a new
number in that memory location.
Entering a Pause In a Memory Number
in some telephone systems, you must dial an access code (9. lor
example) and wait tor a second dlal tone belore you can dial an
outside number. You can store the access code with the phone
number However, it you do, you should also store a pause alter
the access code to allow lhe oulslde line time to connect, Alter en-
tering the access code, press RENAL/PAUSE to enler a 2-second
pause,
e t ii
we are we
% 4} 4172105 rm me n Mmrdny.Apnl23.2MI 944 AM
Dialing a Stored Number
Press TALK. When you hear the dial lone, press MEM then the
memory location number (1—0) The phone dials the number,
chain Dialing Service Numbers
To quickly recall special services numbers (such as slterneie long
distance or bank by phone). slore each group of numbers in its
own memory location.
When calling special services, dial lhe service's main number first.
Then, at the appropriate place in call, press HEM, then lhe number
for the location where the additional numbers are stored.
Testing Stored Emergency Numbers
ll you store an emergency services number (police depenmenl,
lire department, or ambulance, tor example) and you went to test
the stored number, make the test call during the late evening or
early mornlng to avoid peak demand periods. Remain on the Ilne
to explain the reason for your call.
I7
eh;
‘ é 4]»21051m Pug: I! Mnmay.Apanl1ml 9:44AM
4k
1? TROUBLESHOOTING
| We do not expect you to have any problem with your telephone,
but il you do, these suggestions might help.
Problem Suggestion
The keypad dues Mbva Ihe keypad closer ta the base.
not work.
Raise the base's antenna to a vertical position.
Make sure the phone‘s modular and and the AC
aflapler are correctly and securely connected.
Make sure the keypad’s ballefy padt Is prbperly
connected and charged (sea ‘Cmmmg, Charg-
tng, and Replacing the Battery Pack" on Fags B).
Recharge the keypad‘s battery pack.
Place the keypad on the base lot aboul ltve sec-
onds to reset the sewrlty ewesswoteclicn code. 4—
fhe call is nolsy. Keep the keypad and base away Irom tnterler-
ems sources such as computers. remote control
toys, wireless alarm systems, wireless Intercoms
and room monitors, fluorescent Ilghls‘ and alarm-
cal appltances. It the tnterterence ts severe, turn
on lhe devnce.
Move the keypad closer to the base.
Hang up and retinal the number.
Press on to change the channel.
The range Make sure the bases antenna ts versed and Is not
decreases. touch-ng a metal sunace.
Recharge lhe keypad's battery pack,
NA} 15
.,
We are
a? l
7?
Q] 43-2105 rm Page w Momxy,Apnlll,2MI 9»« AM
Problem Suggestion
You can recelve bul Sal TDNEIPULSE anan for me type or service
not make calls you have (sae'Semng (he Dialing may on
P393 10).
l! you still have problems. drsconnecl me phone. If other phones
on the same line work properly. [he fault is in Ihis phone or us in-
slallalinn. If you cannm [ml the problem, lake lhe phone to your
local Radinshack store for assistance.
CARE
Keep the phone dry. if il gels wel, wrpe u dry immedialely Use
and slave the phone only in normal lemperalure environmsnls.
Handle the phone carelully; do nol drop it. Keep the phone away
from dust and dirty and wrpe il wilh a damp cloth occasionally lo
keep it looking new‘ Modifying or lampenng wilh lhe phone's Inler-
nal components can cause a malfunction and mighl Invalidale its
warranty and vold your FCC authorization Io operate ll, Ir your
phone ls nol peflorming as it should‘ lake It to your local Ra-
dloShack slors for assislance, ll me trouble is alleclmg lhe rele-
phone lines, the phone company can ask you lo disconnecl your
phone unhl you have resolved the problem.
% ‘ 65 434mm". an=ZD Mnndly,April)3.2Wl 9:44AM é ' .
lenm One~Year Warranty
"us mount m wan-Mm u, Rauhsnm mam mum-am mum h "mm;
ma wurxminxmp um. mu m In; em m you hum m an. alumina; (mm
mumsmk camp-mid slums 1m annulled mm hum-- am
dames. EXCEPY As PRDVDED kfiREIN. lama was no EXPRESS
wmmrmes mu mv "4mm wmmnnss. momma muse or MER-
cumnalurv AND ewes; run A mucuun mums, me Lumen m
uuRmoN To me DURATION or me wnmeu uumsn wmmnss on»
men neaew. EXcEPT As PRUVlDED neaem. my.“ smu. we no
UABIUTV on newsmmw w ousrouea on mv omen reason on
EN‘rmr wwm RESPECT 10 AN! manna 1055 OR mince cmseo m.
necru on manecm av use on penmaumce OF the mower on
wsme cm or my menu of “us wmnmw, mowmms. am Nor
Lumen ro‘ ANV nuances RESumNG rRou maowemenc . ass as
we mm PROPER", Revenue on mom on mv mu RECT, sPechL,
mcnnemn, on cousenuemm nmoes, even |F Masha ms BEEN
ADVISED or we Posslauurv or sucu DAMAGES
Sam: am- du m um mm: on m w m "whoa wmmly I‘m cu in. x-
uumn a: umw-uun vi mm o: eon-mum"! am; w m. m numbn-
or nemim my leyloyou
m m 1“an mum: «an m an “my m. an an m m m-
a iesmck uh! IW as woo! a wan“ m w my new no: Fu-
dmsh-ek WW II ii: mm. mm «mm woman ovum (n) coma no adv-n by
, pveducl up 1 what amp. lot pun me w. (o) mum in mm nilh on. w
k M me 0 ml. m. a (c) mm m. wcnm mm. Al mum pm me
pvadueu, me pram on men - m - mm. m m- ummy M m.
dwashuek. NW of rm pm me mom: may on mo 11 mo mum-m
alwllunly mm Rmm menus-a mum mm- m walmm m m. w.
mm..- a: me mum manly W wai u ammo m “pair 04 Wmnm
at an mam mm mm- um a mommy and.
m: wmunly do , mum mum-«u... mammal-um. man at
Gad mu «Aw. mam. law" a m usage. u». to lawn lnslntc-
Haul, «upraw mun-m w mun-am. alumina. mm 91 um: Man at
axe-u voluqe or cult-u: (a) lump-h 017m mm mm mm m, a Rmsnam
Aulhurhld Service Ftdflly. (c) «mu-mm mm at tum a- mum. (6) arms”:
arm n) mum-m am a mun-m m a (n was 01 ma ,,_
maul Inuk- Hem m-wwvoe «mm-no: aluminum.
m: warranty qlves yousmmcngumn. Myounuvclwmoalm ”9m; man
my lrum mm to mm
mam Custom: mum,
200 mu Shawn Flow. in Won. Tx 75102
We Service Whal We Sell My
4 3-2105
0350021354315
RadieShflck Corporalion DEAN I
Fan Wanh, Texas 75102 aned In Chlnl
—<-
We e 49?

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2001:06:05 17:22:39+08:00
Create Date                     : 2001:06:05 17:22:13+08:00
Creator                         : Acrobat 4.0 Scan Plug-in for Windows
Producer                        : Acrobat 4.0 Scan Plug-in for Windows
Page Count                      : 20

EXIF Metadata provided by EXIF.tools