Radio Shack 49 2515 Users Manual RadioShack With In Line CircleR No Www

49-2515 to the manual 505ae2c1-eb4f-428b-ae2d-b7475c4aef0a

: Radio-Shack Radio-Shack-49-2515-Users-Manual-352110 radio-shack-49-2515-users-manual-352110 radio-shack pdf

Open the PDF directly: View PDF .
Page Count: 2

OWNER’S MANUAL —

Please read before using this equipment.

www.radioshack.com™

49-2515

© 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.

Thank you for purchasing a RadioShack 1/3-

Inch B&W Indoor/Outdoor Camera. Your

camera is super-small and compact. It is

designed for use with a RadioShack 10-Inch

B&W Single Channel Security Monitor (Cat.

No. 49-2514) to provide a safe and secure

environment.

Built-in Speaker and Microphone — allow

2-way communication with compatible

equipment.

CMOS (Complementary Metal-Oxide

Semiconductor) Sensor — provides

superior-resolution B&W images.

Passive Infrared (PIR) Sensor — detects

motion up to 16.5 feet away from an angle of

up to 100°.

Weatherproof — so you can mount the

camera indoors or outdoors.

%#/'4#"/1706+0)")7+&'.+0'5

Carefully plan where and how you will

position the camera and where you will route

the cable that connects the camera to the

monitor. When planning the installation:

• Select a location for the camera that

provides a clear view of the area you

want to monitor, is free from dust, and is

not in direct sunlight or in line-of-sight of

a strong light source .

• Do not install the camera in a location

where it will be exposed to high humidity

or rain.

• Plan the cable’s route so it is not close to

power or telephone lines, transformers,

microwave ovens, or other electrical

equipment that could interfere with (or

accept interference from) the system.

•Select a location for the camera that has

an ambient temperature between –4°F

(–20°C) and 122°F (50°C).

• If you plan to install the camera in a

location that has conditions not

recommended in this manual, consult

with a professional installer and consider

use of a separate camera cover or

housing.

/1706+0)"#0&"+056#..+0)"6*'"%#/'4#

You can mount the camera indoors or

outdoors in a permanent location such as a

wall or on a movable platform (such as a

tripod) for mounting on a desk, shelf, or table.

1. Use the base of the camera as a guide,

mark the locations for the screw holes on

the mounting surface.

2. Drill a starter hole at each marked

location. If necessary, drill a third hole (at

least 14 mm in diameter) below the

mounting holes to permit the camera’s

cable to be inserted through the

mounting surface.

3. If necessary, insert the supplied drywall

anchors into the screw holes.

4. Insert one of the two supplied screws

through each of the screw holes in the

bracket and into the mounting surface,

then tighten each screw until the base is

secure.

5. Loosen the screw from the camera’s

arm-sleeve and fully insert the base’s

arm into the sleeve. Then secure the

arm and sleeve together by tightening

the screw.

5'66+0)"72"6*'"

%#/'4#

%100'%6+0)"&+4'%6.;"61"6*'"

/10+614

1. Connect the camera’s mini-DIN plug into

the supplied 59-foot cable’s mini-DIN

socket.

2. Connect the 59-foot cable to the

monitor’s mini-DIN port.

±"016'"±"

Though the camera is highly sensitive, it cannot

“see” over a wide area in total darkness. To

assist the camera’s night vision, install a 100-

watt incandescent lamp (rich in infrared

radiation) to illuminate the camera’s viewing

area. You can also use a small incandescent

flood lamp. Halogen lamps, other high pressure

outdoor lamps, and fluorescent lighting are

infrared-poor and not recommended.

The lightning symbol is intended to

alert you to the presence of uninsu-

lated dangerous voltage within this

product’s enclosure that might be of

sufficient magnitude to constitute a

risk of electric shock. Do not open

the product’s case.

The exclamation symbol is intended

to inform you that important operat-

ing and maintenance instructions

are included in the literature accom-

panying this product.

!

WARNING: To reduce the risk of fire or

shock hazard, do not expose this product to

rain or moisture.

CAUTION

CAUTION: TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE COV-

ER OR BACK. NO USER-SERVICEABLE

PARTS INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

!

3

15/+PEJ"$(9"+PFQQT11WVFQQT"%COGTC

#"+/2146#06"#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for

pertinent information.

R

RR

Rý— Warning # — Important ±

±±

± — Note .

..

. — Caution °

°°

° — Hint

2

75+0)"#18"+02765"14"#"59+6%*$1:

1. Connect the extension cable’s mini-DIN plug into the supplied 6-inch adapter cable’s mini-DIN socket.

2. Connect the adapter cable’s yellow end to your TV’s video jack, and connect the white end to your TV’s audio jack.

3. Connect the adapter cable’s red power socket to the supplied DC adapter’s barrel plug.

4. Connect the DC adapter to a standard AC outlet.

%#4'

Keep the camera dry; if it gets wet, wipe it dry

immediately. Use and store the camera only

in normal temperature environments. Handle

the camera carefully; do not drop it. Keep the

camera away from dust and dirt, and wipe it with a damp cloth occasionally to keep it

looking new.

5'48+%'"#0&"4'2#+4

If your camera is not performing as it should,

take it to your local RadioShack store for

assistance. Modifying or tampering with the

camera’s internal components can cause a

malfunction and might invalidate its warranty.

52'%+(+%#6+105

Input Voltage ..................................15 V DC

Lens Angle ..........90° (viewing angle is 76°)

Video Output ...................1.0 Vp-p, 75 Ohm

Audio Output ..................................1.2 Vp-p

Maximum Audio Output Power

(Speaker) ............................................0.4 W

Audio Distortion ....................................<1%

Audio Frequency

Response ......................... 300 Hz to 5 KHz

Resolution ........250,000 pixel, 330 TV lines

Minimum Illumination .............. 2 lux @ F2.0

(without IR LED)

0 lux @ F2.0

(with IR LED)

Operating Temperature ............. 4° to 122°F

(–20° to 50°C)

PIR Maximum Range ................100° ×16.5ft

PIR Detection Angle (H/V) .. Horizontal 100°

Vertical 45°

Dimensions.......... 21/16 × 35/16 × 13/4 inches

(52 × 84 × 45 mm)

Weight (with wire) ................. 5.8 oz (165 g)

Specifications are typical; individual units might

vary. Specifications are subject to change and

improvement without notice.