Radio Shack Trc 446 Users Manual Rsbl'dxni

TRC-446 trc_446_om

TRC-446 to the manual 53e7844d-cdd0-4480-82fa-088d5a26b22f

2015-01-21

: Radio-Shack Radio-Shack-Trc-446-Users-Manual-352256 radio-shack-trc-446-users-manual-352256 radio-shack pdf

Open the PDF directly: View PDF .
Page Count: 24

Download
Open PDF In Browser	View PDF

21-1574.fm Page 1 Thursday, May 13, 1999 4:03 PM

Cat. No. 21-1574

OWNER’S MANUAL

Please read before using this equipment.

TRC-446
Deluxe 4 Watt 40-Channel
Mobile CB Radio
with Weather Alert and ACE

21-1574.fm Page 2 Thursday, May 13, 1999 4:03 PM

FEATURES
Your RadioShack TRC-446 Deluxe 40Channel Mobile CB Radio with Weather
Alert is a high performance CB that also
lets you tune to local and national
weather service broadcasts. This CB is
perfect for recreational, business, or
emergency use. You can call other people who have CBs at home, in their vehicles, or at camp sites. You can also
connect optional equipment to your CB,
such as an external speaker which creates a PA system; or a DC power supply
and base station antenna to use it as a
base station in your home.

RF Gain Control — lets you adjust reception to match the strength of the received signal.
Convenient On-Microphone Channel
Up/Down Controls — let you quickly
scan the band for communications.
CH-9/NOR/CH-19 Switch — lets you
quickly tune to emergency Channel 9 or
Channel 19 without using the rotary tuning control.
Screw-On Microphone Connector —
ensures rugged operation and long life.

Your CB has these features:
ACE (Audio Clarity Enhancer) — suppresses noise levels while leaving the
signal intact during reception. During
transmitting, it enhances the signal, providing you with a significant reduction in
reception and transmission noise.
NOAA 7-Channel WX Band Receiver
— lets you tune to seven national
weather service frequencies which provide local weather conditions and forecasts.
WX/Alert Indicator — shows the CB is
ready to receive and indicates the reception of a weather alert
Built-In SWR Meter — helps you tune
your antenna system to optimize your
CB's performance.

PLL (Phase-Locked Loop) Frequency
Synthesizer — uses a precise frequency reference crystal to provide reliable
and exact tuning.
Two Ceramic Filters — provide superior channel selectivity and prevent adjacent-channel interference.
Specialized Squelch Circuit — compensates for fading signals and eliminates signal chopping during reception.
Last-Channel Memory — tunes to the
last selected channel each time you turn
on the radio.
Lighted SWR/RF/Signal Meter — displays the signal strength and the standing wave ratio (SWR).
Digital Channel Display — makes the
selected channel easy to see.

21-1574.fm Page 3 Thursday, May 13, 1999 4:03 PM

Noise Blanking — reduces the noise
occasionally generated by nearby electrical motors or automotive ignition systems.
CB/WX/PA Switch — lets you quickly
select among normal CB operation,
weather mode, or public address mode.
RX/TX Indicator — shows whether the
CB is transmitting or receiving.
S/RF/SWR/CAL Switch — lets you
quickly change the display of the RF/
Signal Meter to show radio input/output
signal strength, the standing wave ratio
of the antenna, or SWR calibration data.
Universal Mounting Bracket — lets
you mount your CB securely in your vehicle.
Note: To use this CB, you need a mobile or base station antenna (not supplied). Your local RadioShack store has
a wide variety of antennas. For more information, see “Installing an Antenna”
on Page 7.
We recommend you record your CB's
serial number here. The number is on
the CB's back panel.
Serial Number__________________

FCC INFORMATION
The Federal Communications Commission (FCC) does not require you to have
a license to operate this CB. However,
the FCC does require that you read and
know Part 95 of FCC Rules. These rules
apply to the operation of a Class D CB.
We have provided a copy of these regulations with your CB.
Warning: Do not open your CB to make
any internal adjustments. Any internal
adjustments can be made only by an authorized service technician.
Unauthorized internal adjustments and/
or modifications can lead to illegal operation as defined by Part 95 of FCC
Rules. Such illegal operation can lead to
very serious consequences. To be safe
and sure:
• Never open your CB's case.
• Never modify your CB.
Your CB might cause TV or radio interference even when it is operating properly. To determine whether your CB is
causing the interference, turn off your
CB. If the interference goes away, your
CB is causing it. Try to eliminate the interference by either moving your CB
away from the receiver or contacting
your local RadioShack store for help. If
you cannot eliminate the interference,
the FCC requires that you stop using
your CB.

21-1574.fm Page 4 Thursday, May 13, 1999 4:03 PM

CONTENTS
Installation ............................................................................................................... 5
Mounting the TRC-446 ....................................................................................... 5
Connecting the Microphone ................................................................................ 6
Installing an Antenna .......................................................................................... 7
Selecting an Antenna ................................................................................... 7
Connecting an Antenna ............................................................................... 7
Using Vehicle Battery Power .............................................................................. 7
Using the CB as a Base Station ......................................................................... 8
Connecting Optional External Speakers ............................................................. 8
External CB Speaker ................................................................................... 8
Public Address Speaker ............................................................................... 9
Adjusting the Standing Wave Ratio .................................................................... 9
Standing Wave Ratio Guidelines ...................................................................... 10
Standing Wave Ratio Performance ............................................................ 10
A Quick Look at the Controls ............................................................................... 11
Operation ...............................................................................................................
Changing Channels Using the Controls on the Microphone .............................
Listening to Weather Broadcasts ......................................................................
Weather Alert ....................................................................................................
Using the Public Address Function ...................................................................

12
13
13
14
14

CB Operation Tips ................................................................................................
Business Uses ..................................................................................................
Personal Uses ..................................................................................................
CB Courtesy .....................................................................................................

15
15
15
15

Using Common 10-Codes .................................................................................... 16
Maximum Range .............................................................................................. 17
Troubleshooting .................................................................................................... 18
Care and Maintenance .......................................................................................... 19
Specifications ........................................................................................................ 21

21-1574.fm Page 5 Thursday, May 13, 1999 4:03 PM

INSTALLATION

MIC

DOW
K
LOC NNEL
CHA

-9
S/R

F
CB

VO
CH
LU
-19
ME

NB
CA

L
SQ
UE
LC
H

PA
OF
SW
R CA F
L

TR
C-44
6

F
TX

CH
-9

MIC

S/R
F

/RX

GA
IN

/AL

WEA
TH
ER

-19
NB

CA
L

AC
E
PA

R CA

OF
F

TR
OF
F

C-44

TX
/RX

MOUNTING THE
MICROPHONE HOLDER
Using a Philips screwdriver and the supplied screw and washers, attach the
supplied microphone holder to the CB's
left or right side, either horizontally or
vertically (depending on how you plan to
use it).

MOUNTING THE TRC-446
The most common mounting location for
this CB is under a vehicle’s dashboard.
If you use the TRC-446 as a base station, you can place it on a desk, shelf, or
table (See “Using the CB as a Base Station” on Page 8).
When mounting the CB in a vehicle,
choose a location where:
• you can easily reach the CB

WX
/AL
ER
T

• the CB is not directly in front of heating vents
Cautions:
• If you use the TRC-446 in a vehicle,
mount it securely to avoid damage
to the CB or vehicle or injury to anyone in the vehicle during sudden
starts or stops.
• Do not mount the CB where it could
damage or interfere with the proper
operation of any passive restraint
safety device (an air bag or seat
belt).
Follow these steps to mount the CB using the supplied hardware.
1. Select a location that provides
secure mounting.
Caution: Be careful not to drill into
anything behind the mounting surface.

• wires and cables are routed away
from the vehicle's pedals or other
moving parts

2. Using the slots in the mounting
bracket as a template, mark the
positions for the screw holes.

• all wires and cables can reach their
connection points

3. In each marked location, drill a hole
slightly smaller than the supplied
mounting screws.
5

21-1574.fm Page 6 Thursday, May 13, 1999 4:03 PM

inside the MIC jack, then fully insert
the plug into the jack.

4. Using a Phillips screwdriver, attach
the mounting bracket to the mounting surface with the supplied large
mounting screw and star lock washers.

2. Secure the plug by turning the plug's
locking nut clockwise.
3. Slide the microphone onto the
microphone holder.

5. Attach the CB to the mounting
bracket using the supplied rubber
washers and mounting knobs.

To disconnect the microphone, unscrew
the locking nut and gently pull out the
microphone plug.

CONNECTING THE
MICROPHONE

Caution: Always grasp the connector
body when you are disconnecting the
microphone. Never pull on the microphone cable.

1. Align the slot on the top of the
microphone plug with the ridge

EX
PA

A
NN

P
TS

SP
R WE
PO V DC
13.8

PA SP

EXT SP

ANTENNA

13.8 DC Power Supply
+
CAT NO.: 21-1574 TRC-446 FCC ID: AAO21-1574
CUSTOM MANUFACTURED IN THAILAND FOR RADIOSHACK,
A DIVISION OF TANDY CORPORATION
FORT WORTH, TEXAS 76102
SERIAL NO.:

0000001

Base Station Power Setup

POWER
13.8V DC

21-1574.fm Page 7 Thursday, May 13, 1999 4:03 PM

INSTALLING AN
ANTENNA
Caution: To prevent damage to your
CB, do not attempt to transmit without
an antenna attached.

Selecting an Antenna
When you decide on an antenna and its
location, consider these points:
• The antenna should be positioned
as high as possible.
• The antenna and the antenna cable
should be routed as far as possible
from any source of electrical noise
such as ignition systems, electric
gauges, and motors.

• Do not run the cable through a vehicle's engine compartment or other
areas that produce extreme heat.

USING VEHICLE
BATTERY POWER
You can power this CB from your vehicle's battery or from standard AC power
with an optional DC power supply. For information on using AC power, see “Using
the CB as a Base Station” on Page 8.
Follow these steps to power the CB from
your vehicle's battery.
1. Plug the single-connector end of the
power cord into POWER 13.8V DC
on the CB's back panel.

Your local RadioShack store sells a variety of CB antennas for both mobile and
base-station use. Choose the one that
best meets your needs.

2. Connect the black wire to your vehicle’s negative (–) battery terminal or
to a metal part of the vehicle's frame
that is not insulated from the frame
by a plastic part.

Connecting an Antenna

3. Connect the red wire, with its in-line
fuse, to a source of voltage that
turns on and off with the ignition
switch, such as a spare accessory
terminal in your vehicle's fuse box.
This assures you that power to the
CB is turned off when you turn off
the ignition.

Follow the mounting instructions supplied with the antenna you choose.
Route the antenna cable to the CB, then
thread the PL-259 antenna cable plug
into ANTENNA on the back of the CB.
Cautions:
• Do not run the cable over sharp
edges or moving parts that might
damage it.
• Do not run the cable next to power
cables or other CB antenna cables.

4. Connect the orange wire, with its inline fuse, to a source of voltage that
supplies constant positive (+) power
(regardless of the ignition switches
position) or directly to your vehicle's
positive (+) battery terminal. This
enables the radio to “remember” the
last channel you tuned to when you
turn the radio back on.
7

21-1574.fm Page 8 Thursday, May 13, 1999 4:03 PM

USING THE CB AS A
BASE STATION

3. Plug the single connector end of the
power cord into POWER 13.8V DC
on the CB's back panel.

Although this CB is designed for mobile
use, you can also use it as a base station. For base-station installation, you
need a regulated 12-volt DC power supply, such as Cat. No. 22-504 available at
your local RadioShack store.

4. Connect the black wire to the DC
power supply's negative (–) terminal.

Caution: Most 12-volt DC power supplies plug into a standard AC outlet to
produce DC power. Before connecting
your CB to a 12-volt DC power supply,
read and follow the instructions included
with the power supply.
You also need a base station antenna
and coaxial antenna cable and connectors. Your local RadioShack store also
carries a wide selection of suitable antennas, cables, and connectors.
Follow these steps to install the CB as a
base station.
1. Mount the base station antenna as
described in its owner's manual.
Warning: Use extreme caution
when you install or remove a base
station CB antenna. If the antenna
starts to fall, let it go! It could contact
overhead power lines. If the antenna
touches the power line, contact with
the antenna, mast, cable, or guy
wires can cause electrocution and
death. Call the power company to
remove the antenna. DO NOT
attempt to do so yourself.
2. Route the antenna cable to the CB,
then
connect
the
cable
to
ANTENNA on the back of the CB.
8

5. Connect the red wire and orange
wires, with in-line fuses, to the DC
power supply's positive (+) terminal.
Note: Due to the lack of a constant
12VDC, as in an automotive installation,
if you turn off the DC power supply, the
CB “remembers” the last channel you
tuned for only a few minutes. When you
turn on the CB and the DC power supply
again, the radio automatically tunes to
Channel 9.

CONNECTING OPTIONAL
EXTERNAL SPEAKERS
You can connect an external CB or PA
speaker to your CB. The larger, external
speaker provides greater clarity. A PA
speaker lets you take advantage of the
amplifier and mic to use the CB as a
public-address system.

External CB Speaker
To connect an external CB speaker,
use a speaker rated at 8-ohms and capable of handling 3–10 watts of power
(such as Cat. No. 21-549). Simply plug
the speaker cable's 1/8-inch plug into
EXT SP. Connecting the external speaker automatically disconnects the internal speaker.

21-1574.fm Page 9 Thursday, May 13, 1999 4:03 PM

Public Address Speaker
To connect a PA speaker to the CB, use
an 8-ohm speaker capable of handling 5
or more watts of power and equipped
with an 1/8-inch connector on the cable.
Contact your local RadioShack store
for a selection of suitable speakers.
Plug into PA SP. See “Using the Public
Address Function” on Page 14 for operation instructions.

ADJUSTING THE
STANDING WAVE RATIO
Most antennas are factory adjusted.
However, you can usually improve performance by matching the characteristics of your antenna system to the CB's
RF output power using the built-in SWR
meter. The impedance of a CB’s output
compared to the impedance of the antenna and the antenna cable is typically
slightly mismatched. By adjusting this
impedance ratio to be as close to 1:1 as
possible, you maximize the efficiency of
your system.

points to CAL
scale.

on the upper SWR

4. Release the microphone's talk button.
5. Set S/RF/SWR/CAL to SWR.
6. Press the microphone's talk button
again and note the actual SWR
measurement on the upper SWR
scale. See the chart on Page 10 for
help in interpreting the SWR meter
readings.
The SWR value takes into account the
actual frequency of the RF signal transmitted. Therefore, you will get a different
SWR reading from one CB channel to
another. Almost all the CB transmissions usually fall within an acceptable
range. However, for optimum radio performance, we recommend that you fine
tune the antenna's system based on the
channel you use most. If you have no
particular channel preference, set your
antenna's SWR for maximum performance on Channel 19.

After you have properly installed the antenna and routed its cable, follow these
steps to adjust the standing wave ratio
Note: The SWR on some mobile and
base-station antennas cannot be
changed.
1. Turn on the CB by turning OFF/VOLUME clockwise until it clicks.
2. Set S/RF/SWR/CAL to CAL.
3. Hold down the microphone's talk
button and adjust SWR CAL so the
SWR/RF signal meter's needle
9

21-1574.fm Page 10 Thursday, May 13, 1999 4:03 PM

STANDING WAVE RATIO GUIDELINES
The ideal standing wave ratio (SWR) is 1:1, or a meter reading of 1 on the SWR
meter's top scale. This reading, however, can only be obtained under laboratory conditions. A SWR ratio of 1.5:1 to 2:1 is excellent for most mobile CB antenna applications. This chart helps you interpret the different readings you might see.

Standing Wave Ratio Performance
Ratio

Rating

Evaluation

1:1 – 1.5:1

Superior

Perfect match between the antenna/cable and the RF output of
the CB.

1.5:1 – 2:1

Excellent

The antenna/cable system is an
outstanding match to the transmitter’s RF output. Ideal for most
CB installations.

2:1 – 3:1

Good

The antenna/cable system will
perform to specification under
most normal conditions.

Higher than
3.1:1

Inefficient

Indicates a need to inspect the
system, the mounting of the
antenna and all pertinent hardware.

Prolonged exposure to salt spray, humidity, weather-induced corrosion, or vehicle vibration can cause antenna performance to degrade with a subsequent rise in the
SWR. Anytime you notice that the SWR reading is greater than 3:1, check the condition of the antenna, the antenna cable and all antenna connectors and hardware.

21-1574.fm Page 11 Thursday, May 13, 1999 4:03 PM

A QUICK LOOK AT THE CONTROLS

Channel 9-NORChannel 19 Switch

RF Meter/SWR/
Calibrate Switch

CB/Weather Alert/Public Address Switch
Noise Blanking On/Off
Switch
Audio Clarity
Enhancer On/Off
Switch

SWR Meter
RF Meter

Channel Display

Weather Alert
Indicator

Transmit/Receive
Indicator

Hand-Held MIC with
Channel Up/Down
Control
Volume /
Power Switch

Squelch
Control

Rotary Channel
Tuning Dial

RF Gain
Control

Standing Wave Ratio
Calibration Control

NOAA
Weather
Channel
Selector

21-1574.fm Page 12 Thursday, May 13, 1999 4:03 PM

OPERATION
Before you start using your CB, you
should know how to use it effectively
and courteously. “CB Operation Tips” on
Page 15 contains information that will
help you get more enjoyment from using
your CB.

TURNING ON THE CB AND
RECEIVING
TRANSMISSIONS
1. Turn SQUELCH fully counterclockwise.
2. Set CH-9/NOR/CH-19 to NOR, S/RF/
SWR/CAL to S/RF (send and
receive), and CB/WX/PA to CB.
3. To turn on the CB, turn OFF/VOLUME
clockwise until it clicks and you hear
a hissing sound. TX/RX lights, the
CB displays the last-tuned channel
number, and the SWR/RF/Signal
Meter lights.
4. Turn SQUELCH clockwise until the
hissing sound stops.
Note: If the CB picks up unwanted,
partial or very weak transmissions,
continue to turn SQUELCH clockwise
to decrease the CB's sensitivity to
these signals. Turn SQUELCH counterclockwise if you want to listen to a
weak or distant station.
5. Adjust OFF/VOLUME to a comfortable listening level.

6. To manually tune channels, turn the
tuning control beneath the display to
select a channel. The selected
channel number appears, and the
SWR/RF/Signal Meter shows the
signal strength.
To quickly tune to Channel 9 or 19,
set CH-9/NOR/CH-19 to CH-9 or CH19. 9 or 19 flashes.
Important: Always give emergency
communications priority on Channels 9 and 19. Your CB provides for
fast selection of Channel 9 and 19
for that reason.
Notes:
• Selecting either Channel 9 or 19
overrides the manual channel
selection control.
• All channels, with the exception of
Channels 9 and 19, by agreement, are available for general
communications. Channels 9 and
19 are reserved for motorist
assistance and for reporting
emergency situations, hazardous
road conditions, and the like.
7. If necessary, turn RF GAIN clockwise
to boost the strength of a signal.
8. If you hear low-level popping-type
noise, set NB/OFF to NB to turn on
the noise blanking circuit.
9. To improve communication quality,
set ACE/OFF to ACE. This enables
the ACE circuit.
10. To turn off the TRC-446, turn OFF/
VOLUME counterclockwise until you
hear it click.

21-1574.fm Page 13 Thursday, May 13, 1999 4:03 PM

Changing Channels Using the
Controls on the Microphone
To tune to the next higher or lower channel, press UP or DOWN on the microphone.
To quickly change channels in either direction, hold down UP or DOWN until you
reach the desired channel.
To prevent accidentally changing the
channel with UP or DOWN, press LOCK.
Press LOCK again to restore the UP or
DOWN operation.

TRANSMITTING
Note: We recommend you try receiving
transmissions before you transmit.
1. Follow Steps 1–9 under “Turning On
the CB and Receiving Transmissions” on Page 12.
2. Hold down the microphone's talk
button and speak into the microphone in a normal voice from about
2–3 inches away. TX/RX turns red,
and the SWR/RF/signal meter indicates the strength of your transmission.

4. To turn off the TRC-446, turn OFF/
VOLUME counterclockwise until you
hear it click.

LISTENING TO
WEATHER BROADCASTS
The TRC-446 can receive seven preprogrammed weather channels which
have been allocated by the Federal
Communications Commission (FCC) for
use by the National Oceanographic and
Atmospheric Administration (NOAA).
NOAA broadcasts your local forecast
and regional weather information on one
or more of these channels in your area.
Your TRC-446 receives these weather
service frequencies:
Frequency
(MHz)

Channel

162.400

WX2

162.425

WX4

162.450

WX5

162.475

WX3

162.500

WX6

162.525

WX7

162.550

WX1

Note: Do not speak too loudly when
transmitting. It does not make your
signal any stronger, and might distort your transmission.
3. When you finish transmitting,
release the microphone talk button.
TX/RX turns green. The TRC-446
can now receive transmissions.
13

21-1574.fm Page 14 Thursday, May 13, 1999 4:03 PM

To listen to one of the seven available
weather channels, set CB/WX/PA to WX,
then rotate WEATHER to choose a channel for your listening area. The channel
display and the SWR turn off. Readjust
OFF/VOLUME if necessary.
Note: When the CB radio is set to CB or
PA, and you enter a NOAA broadcast area, the state of the WX/ALERT indicates
three possible situations:
OFF — No weather signal on the
selected weather channel. Check
another channel.
GREEN — Normal weather signal.
No emergecy broadcast.
ORANGE — Weather alert broadcast on the selected channel. Turn
to WX to listen to information or
power off then on to clear the alert.

Weather Alert
In the event of severe weather conditions, the National Weather Service
broadcasts a special 1050 Hz tone. The
TRC-446 sounds this tone if it is turned
on and CB/WX/PA is set to CB or WX.
The tone does not sound if the radio is
set to PA. When the radio receives this
signal tone, WX/ALERT lights orange
regardless of the position of CB/WX/PA.
NOAA transmits this tone for 5 to 10
seconds. If the TRC-446 is set to CB or
PA, the orange light remains on even after transmission ceases. You do not
have to be present when the signal is received to be aware of an alert.

However, WX/ALERT turns off if you
turn to WX or move out of the range of
that NOAA channel. To turn off the indicator you can also turn power off, then
on.
The orange indicator means switch to
WX to hear special severe weather information and warnings.

USING THE PUBLIC
ADDRESS FUNCTION
1. Connect a PA speaker to the TRC446 (see “Connecting Optional
External Speakers” on Page 8).
2. Turn OFF/VOLUME fully counterclockwise.
3. Set CB/WX/PA to PA. The meter and
TX/RX turn off.
4. Hold down the microphone talk button and speak into the microphone
in a normal voice. Be sure the
microphone is as far from the PA
speaker as possible to reduce the
possibility of audio feedback or
howl.
5. Adjust OFF/VOLUME as needed to
adjust the PA's volume.

21-1574.fm Page 15 Thursday, May 13, 1999 4:03 PM

CB OPERATION TIPS
Like most activities, CB radio users have
customs and courtesies. The following
tips will help you get the most enjoyment
out of your CB.

TYPICAL USES
FOR A CB RADIO
Business Uses
• Truck drivers and delivery personnel
can learn road and traffic conditions
and get assistance in locating destinations. A CB is also good company
on these “long hauls.”
• Used by construction crews, a CB
quickly pays for itself when you are
calling for additional materials or
coordinating the activities of different work crews.
• For security officers, a CB is more
than a convenience — it is a must
for both safety and efficiency.

Personal Uses
• Keep in touch with home while driving to work, to the store, or to a
social activity. Let your family know
you are tied up in traffic or that you
will stop by the store on the way
home.

• Contact friends or neighbors — find
out “what's happening” or plan a
get-together.
• Ever have car trouble or run out of
gas on the highway? With your CB
you can have peace of mind knowing you can call for assistance.
• Camping, fishing, and other sports
are more fun with a CB. Keep in
touch with a buddy or find out
“what's cooking” back at camp.

CB Courtesy
• Wait for a pause in someone else's
transmission before you ask for a
break.
• If you do not receive an answer to
your call after a second attempt,
sign off and wait several minutes
before trying again.
• Do not hold down the microphone
talk button, called “dead keying”,
when you are talking.
• Assist callers with directions, information about road conditions, and
any other reasonable requests.

• If you are a two-or-more car family,
CBs are great for inter-car communications while family members are
going places.

21-1574.fm Page 16 Thursday, May 13, 1999 4:03 PM

USING COMMON 10-CODES
Citizen's band operators have largely
adopted the following 10-codes for standard questions and answers. These
codes permit faster and more precise
communication in noisy areas. This table lists codes adopted by the Associated
Public-Safety
Communications
Officers (APCO).
Code

Meaning

10-1

Your signal is bad.

10-2

Your signal is good.

10-3

Stop transmitting.

10-4

Message received and understood.

10-5

Relay information to ______.

10-6

I am busy or are you busy?

10-7

Out of service.

10-8

In service.

10-9

Repeat last message.

10-10

Negative (NO).

10-11

____________in service.

10-12

Stand by.

10-13

Report road/weather
conditions.

10-14

Information.

10-15

Message delivered.

10-16

Reply to message.

10-17

En route.

10-18

Urgent

10-19

Contact_______

10-20

What’s your location?

Code

Meaning

10-21

Call______by telephone.

10-22

Cancel last message.

10-23

Arrived at the scene.

10-24

Assignment complete.

10-25

Meet______________.

10-26

Estimated time of arrival
is___

10-30

Use caution.

10-31

Pick up.

10-33

Emergency traffic. Clear the
channel.

10-34

What time is it?

10-41

Switch to Channel –

10-62

Cannot understand.

Note: Although this table lists the 10codes’ meanings in the form of a statement, they can also be phrased as
questions (10-6: Are you busy?, 10-20:
What is your location?).

21-1574.fm Page 17 Thursday, May 13, 1999 4:03 PM

MAXIMUM RANGE
The maximum range and quality of CB
transmissions vary depending on the following typical conditions:

If you suspect engine noise as a source,
turn off the engine and operate the CB
with the ignition set to ACC. If most or all
of the noise stops, the problem is in vehicle's ignition or electrical system.

• The type and quality of antenna
used.

The following few hints can help you reduce or eliminate such noise.

• The height of the antenna's mounting location — the higher the
antenna, the greater the signal's
range

• Replace old ignition wires with new,
high-voltage,
noise-suppression
wires.

• The surrounding terrain — mountains and tall buildings limit the
range.
• Weather conditions.
• The number of nearby CBs operating on the same channel.

REDUCING NOISE
The audio clarity enhancer (ACE) circuit
uses compander (compressor and expander) technology to improve communication quality. The circuit maintains
the dynamic range while increasing the
signal-to-noise ratio as the gain is automatically controlled according to the input signal level. This results in a
reduction in wide band noise.

• Install noise suppressors on your
spark plugs, or install new spark
plugs that have built-in suppressors.
• Be sure that the black wire ground
connection is securely attached to
either your vehicle’s battery's negative (GND) terminal or to a good
electrical chassis ground.
If problems persist, check your alternator or generator, voltage regulator, and
any stand-alone gauges. Noise from
these sources can be reduced or eliminated using bypass capacitors at various output voltage points.
Your local RadioShack store has a wide
selection of noise-suppression accessories.

The noise blanking (NB) circuit helps
keep background noise to a minimum.
However, strong sources of electrical
noise, generated by spark plugs or the
ignition of your car, or another radio,
might be more than the circuit can compensate for.

21-1574.fm Page 18 Thursday, May 13, 1999 4:03 PM

TROUBLESHOOTING
If your CB is not working as it should, follow the suggestions below to see if you can
eliminate the problem. If the problem persists, take the CB to your local RadioShack
store for assistance.
Symptom

Reception difficulties

Check That:
OFF/VOLUME is turned on.
CB/WX/PA is set to CB
OFF/VOLUME is at a sufficient listening level.
RF GAIN is set to the correct level.

The microphone is securely plugged into MIC.
The antenna cable is securely plugged into ANTENNA
on the rear of the radio and attached securely to the
antenna at the other end.
Transmission difficulties

The CB is turned on.
OFF/VOLUME is at a sufficient listening level.

The microphone is securely plugged into MIC.
All connectors (microphone, antenna, speakers) are
tight and secure.
When transmitting, you are fully pressing the microphone talk button.
The antenna is properly mounted and not obstructed or
grounded.
No channel selection or
only Channel 9 or 19
can be selected.

CB/WX/PA is set to CB

No operation at all.

The power supply and in-line fuse are functioning
(“Replacing the Fuses” on Page 20)

CH9/NOR/CH-19 is set to NOR

21-1574.fm Page 19 Thursday, May 13, 1999 4:03 PM

CARE AND MAINTENANCE
Your RadioShack TRC-446 Deluxe 40-Channel Mobile CB is an example of superior design and craftsmanship. The following suggestions will help you care for
your TRC-446 so you can enjoy it for years.
Keep the CB dry. If it gets wet, wipe it dry immediately. Liquids might
contain minerals that can corrode the electronic circuits.

Use and store the CB only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, and distort
or melt plastic parts.
Keep the CB away from dust and dirt, which can cause premature
wear of parts.

Handle the CB gently and carefully. Dropping it can damage circuit
boards and cases and can cause the CB to work improperly.

Wipe the CB with a damp cloth occasionally to keep it looking new. Do
not use harsh chemicals, cleaning solvents, or strong detergents to
clean the CB.
Modifying or tampering with the CB’s internal components can cause a malfunction
and might invalidate its warranty and void your FCC authorization to operate it. If
your CB is not performing as it should, take it to your local RadioShack store for
assistance.

21-1574.fm Page 20 Thursday, May 13, 1999 4:03 PM

REPLACING THE FUSES
The TRC-446's 2-amp fuses help protect your CB from power surges and
short circuits.
• If the red wire's fuse is blown,
replace it with a 2-amp, fast-acting
glass fuse, such as Cat. No. 2701007.
• If the orange wire's fuse is blown,
replace it with a 1-amp, fast-acting
glass fuse, such as Cat. No. 2701005.
Follow these steps to replace each fuse.
1. Make sure the power source and CB
are both off.
2. To open the fuse holder, push the
fuse holder ends together, then turn
either end counterclockwise and
release it.
3. If the fuse is blown, replace it.
Caution: Do not use a fuse with ratings other than those specified here.
Doing so might damage your TRC446.
4. Close the fuse holder by pushing the
fuse holder ends together, then turn
either end clockwise.

21-1574.fm Page 21 Thursday, May 13, 1999 4:03 PM

SPECIFICATIONS
GENERAL
Channels ................................................................................................. 40 Channels
Frequency Range ........................................................... 26.965 MHz to 27.405 MHz
Power Requirements ........................ .. 13.8V DC (12–16 Volts DC, Negative Ground)
Dimensions (HWD) ............................................................... .. 21/4 × 71/4 × 77/8 Inches
(57 × 184 × 200 mm)
Weight ................................................................................................. 3.1 lbs (1.4 kg)

RECEIVER
Sensitivity .............................................................. 0.5 µV or better for 10 dB (S+N)/N
Adjacent Channel Rejection ......................................................... 50 dB (at 10 kHz)
Audio Output ............................................................................ 4.5 Watts (Maximum)
Frequency Response ............................................................................ 450–2500 Hz
Intermediate Frequency ............................................................... 1st IF: 10.695 MHz
2nd IF: 455 KHz
Cross Modulation ............................................................................................... 50 dB
Squelch ..................................................................... Adjustable from 0.5 µV to 1 mV

TRANSMITTER
Output Power ...................................................................... 4 Watts (FCC Maximum)
Type of Modulation .............................. AM Double-Sideband, Full Carrier Modulation
Modulation Capability ........................................................................................ ±90%
Spurious Emission ......................................................................... Less than –70 dB
Frequency Tolerance ...................................................................................... ±200 Hz
Antenna Impedance ....................................................................................... 50 Ohm
Current Drain ....................................... (13.8-volt supply) 1 Amp with No Modulation
1.6 Amps with 80% Modulation

21-1574.fm Page 22 Thursday, May 13, 1999 4:03 PM

PUBLIC ADDRESS
Output Power ............................................................................ 4.2 Watts (Maximum)
Current Drain (at maximum power) .............................................................. 1.2 Amps

WEATHER RADIO
Frequency Coverage (MHz) ........................................................................... 162.400
162.425
162.450
162.475
162.500
162.525
162.550

Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.

21-1574.fm Page 23 Thursday, May 13, 1999 4:03 PM

NOTES

21-1574.fm Page 24 Thursday, May 13, 1999 4:03 PM

Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack companyowned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102

We Service What We Sell

RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
05A99

04/99

937485
Printed in Thailand

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 24
Create Date                     : 1999:05:13 16:05:41
Producer                        : Acrobat Distiller 3.02
Author                          : first last
Creator                         : FreeHand 8.0
Title                           : Rsbl'dxn.epsi

EXIF Metadata provided by EXIF.tools

Radio Shack Trc 446 Users Manual Rsbl'dxni

TRC-446 trc_446_om

TRC-446 to the manual 53e7844d-cdd0-4480-82fa-088d5a26b22f

Navigation menu

Versions of this User Manual:

Views

Navigation