Radius Networks E8 Server User Manual
Radius Networks, Inc. Server Users Manual
Users Manual
Bluetooth 5.0(BLE)
The E8 is a rugged, weatherproof, and temperature-resistant
The E8 is a fully stand-alone Bluetooth 5 proximity beacon
E8
Congurable Advertisements:
iBeacon
AltBeacon (Beacon ID | Reference RSSI)
Eddystone-UID
Eddystone-URL (Physical Web)
Advertisement Rate: 1Hz - 10Hz
SETTINGS
Ruggedized, weatherproof beacon technology.
that supports iBeaconTM, AltBeaconTM, and EddystoneTM technology.
proximity beacon powered by eight D batteries. It can be installed in
any location, regardless of available power, and provides proximity
advertisements for mobile applications that are compatible with iBeacon,
AltBeacon, and Eddystone standards, including the Physical WebTM.
Size: 160 x 170 x 45mm
Weight: 400g (without batteries)
Colors: White
Form Factor: Waterproof IP67
Electrical Interface: Quad D battery clips
Operating Temperature: -30°C to 70°C (-22°F to 158°F)
Mounting: Mounting plate with VESA 75 x 75 compatible
mounting holes and strap points. Includes 4x screws and
anchors.
HARDWARE
Apple iBeaconTM: iBeacon Licensed Product
EddystoneTM: Eddystone Licensed Product
Bluetooth: Bluetooth controller subsystem
FCC: FCC Part 15
CE: EN300328, EN60950, EN62479
IC: Industry Canada
CERTIFICATIONS
Battery Life: 10 years
Included: 8x D batteries
BATTERIES Version:
Transmission Range: 300m
Antenna: External RP-SMA Female
Connector, includes 3.2dBi straight whip
antenna
BLUETOOTH RADIOS
CONTACT US:
202-681-9434
hello@radiusnetworks.com
© 2018 Radius Networks, Inc.
Server
FCC Information and Copyright
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This
equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IC WARNING
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation,
Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject
to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause
undesired operation of the device
The distance between user and products should be no less than 20cm
ADVERTENCIA IC
Cet appareil contient des émetteurs / récepteurs exemptés de licence conformes aux RSS (RSS)
d'Innovation, Sciences et Développement économique Canada. Le fonctionnement est soumis aux
deux conditions suivantes :
(1) Cet appareil ne doit pas causer d'interférences.
(2) Cet appareil doit accepter toutes les interférences, y compris celles susceptibles de
provoquer un fonctionnement indésirable de l'appareil.
La distance entre l'utilisateur et de produits ne devrait pas être inférieure à 20cm