Radius Networks RBT002 Locator Tent User Manual
Radius Networks, Inc. Locator Tent Users Manual
Users Manual
Radius Networks, Inc.
www.radiusnetworks.com
RBT-002
Locator Tent
The RBT-002 Locator Tent is a Bluetooth Smart™ equipped location
tracking token used by major quick service and fast casual restaurants
to provide on-time, table-level accurate meal delivery services.
As a component of the Radius Networks in-venue location tracking
system, individual locator tents can be tracked as they are moved
within store, restaurant or other physical venue.
Locator tents combine integrated electronics, stackability and
high-visibility to provide an optimal solution for tracking, locating and
verifying customers to enable direct-to-table delivery service in a
fast-paced quick-service restaurant environment.
The Locator Tent is powered by two, long-lived CR-2032 lithium coin
cell batteries, providing over 12 months of continuous service without
the need for recharging or battery replacement. As part of an on-going
service arrangement, tents are generally replaced on an annual basis.
None of the internal components or batteries of the Locator Tent are
intended to be user serviceable.
The Locator Tent is available with custom labels to provide brand
alignment and a superior service experience for customers.
1
Copyright ©2016 Radius Networks, Inc.
Rev. RBT-002-INS-002
Radius Networks, Inc.
www.radiusnetworks.com
Regulatory Compliance
This device complies with the following regulatory requirements:
● USA-FCC
○ Part 15 – General emissions
○ Part 15.247:2011 – Operation within the band
2.4-2.4835GHz
○ Parts 15.205 and 15.209 – Spurious emissions
● Canada-IC
○ ICES-003 – General emissions
○ RSS-210:2010 – Low-power License exempt Radio
Communication Devices
● CE
Radius Networks, Inc., as the responsible party for regulatory
compliance, declares under our sole responsibility that as
delivered the described product is in conformity with the
R&TTE Directive 1999/5/EC1, Commission Regulation (EC)
No 1275/2008 and 278/2009, following the provisions of ERP
Directive 2009/125/EC, EU RoHS Directive 2011/65/EU and
carries the CE-marking.
This device complies with FCC Part 15 and Industry Canada license
exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le brouillage est susceptible
d'en compromettre le fonctionnement
This device complies with Health Canada’s Safety Code. The installer
of this device should ensure that RF radiation is not emitted in excess
of the Health Canada’s requirement.
Cet appareil est conforme avec Santé Canada Code de sécurité 6. Le
programme d’installation de cet appareil doit s’assurer que les
rayonnements RF n’est pas émis au-delà de I ’exigence de Santé
Canada.
“Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.”
"Les changements ou modifications non expressément approuvés par
la partie responsable de la conformité pourraient annuler l'autorité de
l'utilisateur à utiliser cet équipement."
More Information
For additional information, include ordering and customer support,
please contact:
Radius Networks
3255 Grace Street NW
Washington, DC 20007
202-681-9434
sales@radiusnetworks.com
support@radiusnetworks.com
www.radiusnetworks.com
2
Copyright ©2016 Radius Networks, Inc.
Rev. RBT-002-INS-002