Radius Networks RBT004 Tall Tent User Manual EMBC02 Data Sheet

Download:
Mirror Download [FCC.gov]
Document ID	4050484
Application ID	aGCo9YvR2wS1U1xDfwrA7g==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	23kB (287547 bits)
Date Submitted	2018-10-27 00:00:00
Date Available	2018-10-27 00:00:00
Creation Date	2018-10-17 15:50:20
Producing Software	Acrobat Distiller 9.3.3 (Windows)
Document Lastmod	2018-10-23 12:00:52
Document Title	EMBC02 Data Sheet
Document Creator	Acrobat PDFMaker 15 for Word(Jisupdf Editor)
Document Author:	mbe

Tall Tent
RONGMAI
RBT-004
General Description
RBT-004 is a Bluetooth Low-Energy proximity beacon
with integrated accelerometer for attachment to objects
that move.
RBT-004 advertises ID data that is
compatible with common beacon standards (UUID, Major
ID, and Minor
ID), ONLY when an object is moving, or ONLY after an
object has fallen. There is also a mode to display
accelerometer data and gesture counts.
Similar to RBT-004 is part of the coin-cell family of
beacons which come in a small, weatherproof enclosure,
using a standard coin-cell battery, or as a PCB panel. A
push-button with LED feedback allows the user to select
the right operating mode for their deployment.
RBT-004 operating modes offer tradeoffs between
different functional modes.
EMBC02 is shipped pre-programmed with several
operating modes:
Sleep Mode with over 7 years of shelf life typical
Sensor Mode offers 1s beacon interval, 60m range
line-of-sight (LOS), and 4.5 months of battery life
typical while displaying raw accelerometer data and
a tap counter.
Moving Mode offers 100ms beacon interval, 30m
range, and consumes an average of 275 µA when
beaconing and 6 µA while idling. The device only
beacons when movement is detected and one
minute after the device is still
Fall Mode offers 100ms beacon interval, 120m
range, and consumes an average of 350 µA when
beaconing and 13 µA while idling. The device only
beacons after a fall has occurred and 10 minutes
after the event
Any mode can be locked for final deployment
RBT-004 can be delivered in any quantity with guaranteed
unique ID numbers. A unique serial number is printed on
the label and encoded in a QR code for optical scanning.
RBT-004 firmware can be customized for individual
deployments with the Proximity Beacon Development Kit.
Custom parameters include UID, power level, beacon
interval, state-machine, gesture alarm mode, gesture
threshold, and accelerometer data and settings. Gestures
include: any movement, no movement, taps, falls, and
shocks.
EMBC02 is FCC, IC, and CE certified, RoHS, Reach, and
halogen free compliant.
Features
Weatherproof Enclosure
o IP-64 rating, -20C to +60C operating range
o Size: 30mm x 10mm disk; Weight: 7 grams
o Replaceable CR2032 3V Li battery
o Integrated push-button with LED indicators
o PCB-only format also available
Accessories
o Wall-mount
o Key-fob
o Wrist-band
Selectable ID Mode beaconing
o ID packet format includes:
UUID, Major ID, and Minor ID
Output power information
o Sensor Mode: 60m LOS, 1s beacon interval, with
tap counter
o Moving Mode: 30m LOS, 100ms beacon interval,
1 minute broadcast period after movement is
detected
o Fall Mode: 120m LOS, 100ms beacon interval, 10
minute broadcast period after a fall is detected
Unique Identification
o UUID:
699EBC80-E1F3-11E3-9A0F-0CF3EE3BC012
o Unique Major and Minor IDs (serialized)
o Unique Serial Number
o Serial number, Major/Minor ID embedded in QR
Code for deployment
“EMBC Finder” Smart Device App
iOS App available on App Store
o iPhone® 4S and above
o iPad® 3 and above (Mini, Air, etc.)
Android App available on Google Play™
4.3 and newer devices
Applications
Inventory tracking
Electronic Leash Applications
Activity monitoring
FCC Information
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Asicentrum                      : 0
Author                          : mbe
BKK                             : 0
Company                         : EM Microelectronic-Marin SA
Content Type                    : Spec
Content Type Id                 : 0x0101009492C1A820541346A3D247CA26FCB0B203003B1F895A528FEA45979FC5B791E62C81
Copy To                         : Logitech (O. Theytaz)
Create Date                     : 2018:10:17 15:50:20+08:00
Department EM                   : 29
ECN Sign                        : 
EM-US                           : 0
ETA                             : 0
Engineering                     : 0
FEPS                            : 0
ICN App Name                    : Jisupdf Editor
ICN App Platform                : Windows
ICN App Version                 : 2.00
Internet                        : 0
Modify Date                     : 2018:10:23 12:00:52+08:00
Notes 0                         : 
Owner                           : LAB
Satellite                       : 0
Security Type                   : Public
Source Modified                 : 
Status EM                       : published
Sub-division                    : 0
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.4-c006 80.159825, 2016/09/16-03:31:08
Metadata Date                   : 2018:10:23 12:00:52+08:00
Creator Tool                    : Acrobat PDFMaker 15 for Word(Jisupdf Editor)
Document ID                     : uuid:fdb45d70-2cbb-408c-9e84-2797029e9278
Instance ID                     : uuid:c27461a8-0512-440c-8ca6-7e52e1446ae5
Subject                         : 13
Format                          : application/pdf
Title                           : EMBC02 Data Sheet
Creator                         : mbe
Producer                        : Acrobat Distiller 9.3.3 (Windows)
Bkk                             : 0
Copy 0020 To                    : Logitech (O. Theytaz)
Em-us                           : 0
Eta                             : 0
Feps                            : 0
Security 0020 Type              : Public
ECN0020sign                     : 
Page Count                      : 3

EXIF Metadata provided by EXIF.tools