Radwin BSA5XS Smart Antenna Outdoor Radio Device User Manual

Radwin Ltd. Smart Antenna Outdoor Radio Device

User Manual

           RADWIN 2000 JET,  RADWIN 5000 JET     Smart Antenna Outdoor Radio Device    REFERENCE GUIDE
Regulatory Compliance    FCC/IC - Compliance  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and IC RSS standards. These limits are designed to provide reasonable  protection against harmful interference in  a residential installation. This equipment generates  uses  and  can  radiate  radio  frequency  energy  and,  if  not  installed  and  used  in accordance  with  the  instructions,  may  cause  harmful  interference  to  radio  communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment  does  cause  harmful  interference  to  radio  or  television  reception,  which  can  be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:  • Reorient or relocate the receiving antenna.   • Increase the separation between the equipment and receiver.   • Connect the equipment into an outlet  on  a circuit different from that to which the receiver is connected.   Consult the dealer or an experienced radio/TV technician for help.  Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.   Outdoor  units  and  antennas  should  be  installed  ONLY  by  experienced installation professionals who are familiar with local building and safety codes and,  wherever  applicable,  are  licensed  by  the  appropriate  government regulatory  authorities.  Failure  to  do  so  may  void  the  product  warranty  and may expose the end user or the service provider to legal and financial Caution liabilities.  Resellers  or  distributors of  this  equipment  are  not  liable  for  injury, damage or violation of  regulations associated with the installation of outdoor units  or  antennas.  The  installer  should  configure  the  output  power  level  of antennas according to country regulations and antenna type.     This equipment should be installed and operated with a minimum distance of 76cm between the radiator and your body.  Warning          The device is granted to operate under FCC/IC certification in the 5.8 GHz band only.   Warning                  RADWIN 2000 JET, RADWIN 5000 JET Reference Guide  i
This device complies with Part 15 of the FCC rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:  (1) This device may not cause harmful interference.   (2) This device must accept any  interference received, including interference that may cause undesired operation.    Cet appareil est  conforme la  norme  d'Industrie Canada exempts  de  licence RSS  (s).  Son fonctionnement est soumis aux deux conditions suivantes:  1. Cet appareil ne peut pas causer d'interférences, et  2.  Cet  appareil  doit  accepter  toute  interférence,  y  compris  les  interférences  qui  peuvent causer un mauvais fonctionnement de l'appareil.   This Class B digital apparatus complies with Canadian ICES-003.  Cet appareil numrique de la classe B est conforme  la norme NMB-003 du Canada                                   RADWIN 2000 JET, RADWIN 5000 JET Reference Guide ii
          Overview  The  RADWIN  2000  JET,  RADWIN  5000  JET  is  a  Smart  Antenna  Outdoor  Radio  Device operating  in  the 5.8  GHz  frequency  band.  It  is  a  TDD  OFDM  radio  supporting  5 MHz,  10 MHz, 20 MHz and 40 MHz channel bandwidths. The RADWIN 2000  JET,  RADWIN  5000  JET  incorporates an integrated  phase array cross-polarized  active  antenna  that  supports  2x2  and  3x3  MIMO  configuration  modes.  The antenna is software configurable to operate in 2x2 or 3x3 MIMO modes. The RADWIN 2000 JET, RADWIN 5000 JET also supports software configurable capabilities for PtP and PtMP deployment architecture.   The RADWIN 2000 JET model indicates PtP software configuration device. The RADWIN 5000 JET model indicates PtMP software configuration device. The device is certified under the FCC ID: Q3K -BSA5XS and IC: 5100A-BSA5XS.   Condition of Use  The  RADWIN  2000  JET,  RADWIN  5000  JET  is  a  RADWIN  proprietary  radio  device.  The device is manufactured and assembled by RADWIN or its subcontractors. The device is not for sale to the general public.   Antenna  The  RADWIN  2000  JET,  RADWIN  5000  JET  is  certified  with  a  proprietary  RADWIN manufactured  integrated  smart  antenna  type  covering  both  Point-to-Point  and  Point-to-Multipoint  configurations.  It  supports  2x2  and  3x3  MIMO  and  is  the  only  antenna  to  be incorporated in the device.                RADWIN 2000 JET, RADWIN 5000 JET Reference Guide 1
Maximum Output Power  5725 – 5850 MHz band - FCC/IC The maximum output power  can be  set  as  follows,  when  operating  in  the  5.8  GHz  band, under FCC and IC regulations. The power values are for PtP systems and PtMP systems. For PtMP systems the total EIRP is limited to 36 dBm. Therefore the output power of the system will be reduced to comply with 36 dBm EIRP.      RADWIN 2000 JET (PtP) RADWIN 5000 JET (PtMP)   5 MHz: 29.8 dBm 10 MHz: 29.7 dBm 20 MHz: 29.8 dBm 40 MHz: 29.7 dBm   5 MHz: 15.3 dBm 10 MHz: 15.2 dBm 20 MHz: 15.3 dBm 40 MHz: 15.2 dBm       Radiation Exposure Evaluation  RADWIN  2000  JET  systems  -  the  calculated  recommended  safe  distance  at  density  of 1mW/cm2 is 76cm.  RADWIN 5000 JET systems - the minimum separation distance is 20cm                            RADWIN 2000 JET, RADWIN 5000 JET Reference Guide 2

Navigation menu