Raffel Systems JCTBT01 JCT BT 01 User Manual
Raffel Systems, LLC JCT BT 01 Users Manual
Users Manual
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
1 | P a g e
JCT BT 01 Bluetooth
System User Manual
The JCT BT 01 Bluetooth junction interfaces with Raffel Systems power recline controls.
It allows full connectivity to the end user to control functions of a power recline chair using
a variety of Bluetooth enabled devices such as cell phones, tablets, and laptops.
Feature Controls:
Power Head Rest, Lumbar, Recline, and Home position
Memory One – User 1
Memory Two – User 2
Massage Function (Optional)
Intensity and mode
o High
o Medium
o Low
Mode
o Steady
o Wave
o Pulse
Heat Function (Optional)
Mode
o High
o Medium
o Low
o Off
Light and Cool Functions
(Optional)
Light - On/OFF
Cooling – On/OFF
System of Components:
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
2 | P a g e
JCT BT 01 Bluetooth
System User Manual
Operation:
Download App from the desired App Store for the desired Bluetooth enabled devices
such as cell phones, tablets, and laptops.
Validate Bluetooth device is enable on your cell phone, tablet, and or laptop.
Click on the Application icon.
Select the desired device to control from the
dropdown menu.
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
3 | P a g e
JCT BT 01 Bluetooth
System User Manual
Head Rest, Lumbar, and Recline Functions
Depress the desired icon for Head Rest,
Lumbar, and Recline to either open or close to
the desired position and release to stop.
Home icon
The purpose of the Home icon is to fully
reposition the Head Rest, Lumbar, and the
Recliner to the fully seated position.
Depress and hold the Home icon to reposition
the chair until fully seated position. Release icon
to stop at any time.
Set Memory 1 Position
Depress the Open and or Close icon to the
desired position for user 1 for all three functions.
i.e. Head Rest, Lumbar, and Recline. Then
depress the Set icon for Memory 1; slight chair
movement will indicate that the memory position
has been set. This small movement is feedback
to the user that Memory 1 function is set. Then
release button. Memory 1 is set.
Press and hold the Home Icon until the chair is
in the fully seated position. Depress the Memory 1 Go icon and the chair will reposition to
the set Memory 1 position.
Set Memory 2 Position
Depress the Open and or Close icon to the desired position for user 2 for all three
functions. i.e. Head Rest, Lumbar, and Recline. Then depress and hold the Set icon for
memory 2 until there is chair movement. This small movement is feedback to the user
that Memory 2 is set. Then release button. Memory 2 is set.
Press and hold the Home Icon until the chair is in the fully seated position. Depress the
Memory 2 Go icon and the chair will reposition to the set Memory 2 position.
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
4 | P a g e
JCT BT 01 Bluetooth
System User Manual
Massage Functions (Optional)
Mode - Depress the Steady, Wave, or Pulse Icon for
desired massage function.
Intensity - Depress the High, Medium, or Low icon for
desired massage strength.
The Power icon will illuminate white indicating the
massage function is ON. Depress Power icon at any
time to turn ON or OFF massage function.
NOTE: The massage function has a 20 Minute Timer.
Heat Functions (Optional)
Mode - Depress the Steady, Wave, or Pulse Icon for
desired massage function.
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
5 | P a g e
JCT BT 01 Bluetooth
System User Manual
Light Functions (Optional)
Depress the Light icon to activate the light.
Cooling Functions (Optional)
Depress the Snowflake icon to activate the cooling cup.
NOTE: The cooling function has a 1 Hour Timer.
Disconnect
Depress the X in the upper left hand of the screen for pull
down menu to disconnect control to the chair.
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
6 | P a g e
JCT BT 01 Bluetooth
System User Manual
FCC and IC Statement:
This equipment has been tested and found to comply with the limits for Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (2) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
To comply with FCC RF exposure limits for general population/uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
To comply with ISED RF exposure limits for general population/uncontrolled exposure,
the antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20cm from all persons and must not be co-located or operating in
conjunction with any other antenna or transmitter.
This Device complies with Industry Canada License-exempt RSS Standard(s).
Operation is subject to the following two conditions: 1) this device may not cause
interference, and 2) this device must accept any interference, including interference that
may cause undesired operation of the device.
Note: Modifications to this product will void the user’s authority to operate this
equipment.
Raffel Systems ~ N112W14600 Mequon Rd ~ Germantown, WI 53022 ~ (262)502-1011~ (262)502-1010
www.raffel.com ©2017 by Raffel Systems, LLC
7 | P a g e
JCT BT 01 Bluetooth
System User Manual
WARRANTY PAGE
Limited Warranty
Raffel Systems, LLC warrants this product (including any accessories) against defects in
material and workmanship for a period of 12 months from the date of the first consumer
purchase. This warranty is enforceable only by the original purchaser only. ALL DAMAGED OR
MISSING PARTS MUST BE REPORTED WITHIN 14 DAYS OF PURCHASE.
This warranty covers all defects in material and workmanship in this product, but DOES NOT
COVER the following.
1. Damage, deterioration or malfunction resulting from:
Acts of God, accident, misuse, abuse, negligence, improper installation,
maintenance, improper operation, or failure to follow the instructions contained in
this Owner’s Manual.
Any damage in the shipment of the products.(Claims must be presented to the
carrier) Repair, attempted repair, or modifications done by anyone other than Raffel
System technicians.
Any unit which has been modified of attempted to be modified or altered in anyway
whatsoever.
2. Normal wear and periodic maintenance.
3. Any unit used for industrial or commercial purposes (including rental).
4. Products sold AS IS or WITH ALL FAULTS, or consumables (such as fuses, batteries,
etc).
5. Customer instruction installation and set up adjustments or signal reception problems.
6. Raffel Systems, LLC will repair or replace (at it's discretion) the units covered by this
warranty, without charge to the consumer for labor or materials.
CUSTOMERS ARE RESPONSIBLE:
FOR INITIAL SHIPPING CHARGES. However, Raffel Systems will pay the return shipping
charges to any destination within the USA if repairs are covered by the warranty.
TO OBTAN WARRANTY SERVICE, please call Raffel Systems Service Center.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE
EXCLUSIVE REMEDY OF THE CONSUMER. RAFFEL SYSTEMS SHALL NOT BE
LIABEL FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF
ANY EXPRESSED OR IMPLIED WARRANTY ON THIS PRODUCT.EXCEPT TO THE
EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED
WARRANTIES,INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS
WARRANTY.