Rajant CX1-3600 3.65 GHz MIMO Portable, Body Worn, Wireless Mesh Networking Node User Manual User Guide

Rajant Corporation 3.65 GHz MIMO Portable, Body Worn, Wireless Mesh Networking Node User Guide

Contents

User Guide

Download: Rajant CX1-3600 3.65 GHz MIMO Portable, Body Worn, Wireless Mesh Networking Node User Manual User Guide
Mirror Download [FCC.gov]Rajant CX1-3600 3.65 GHz MIMO Portable, Body Worn, Wireless Mesh Networking Node User Manual User Guide
Document ID3141376
Application IDN5/J9q4PjPeaabH3Foem2A==
Document DescriptionUser Guide
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize71.24kB (890560 bits)
Date Submitted2016-09-21 00:00:00
Date Available2016-09-21 00:00:00
Creation Date2016-08-17 14:22:11
Producing SoftwareAcrobat Distiller 11.0 (Windows)
Document Lastmod2016-08-17 14:22:11
Document Titlefile:///C:/Users/jwarnell/Downloads/CX1_User_Guide.html
Document CreatorPScript5.dll Version 5.2.2
Document Author: jwarnell

BreadCrumb® CX1 Version 11 User Guide
Model: BreadCrumb CX1
User Guide Version: 11.12.0 Rev A
Software Version: 11.12.0
Document Part Number: 03-100147-001
Corporate Headquarters:
Rajant Corporation
400 East King Street
Malvern, PA 19355
Tel: (484) 595-0233
Fax: (484) 595-0244
 http://www.rajant.com
Table of Contents
Document Revision History
Copyright Statement
FCC Statement
Antennas
Safety
Modifications
Professional Installation Attestation
Maximum Certified Power
GNU General Public License Statement
Preface
1. Introduction to BreadCrumbs
1.1 What is a BreadCrumb?
1.2 The Mesh Network
2. Description of a BreadCrumb CX1
2.1 Radios
2.2 Enclosure
2.3 Antenna Connectors
2.4 etherCON Connector
2.5 Power Requirements
2.6 Status LED
3. Appendices
Appendix A: Error and Warning Codes
Appendix B: Ports and Protocols
Appendix C: Rajant End User License Agreement
Appendix D: GNU General Public License
Document Revision History
Revision
Date
Changes
11.12 Rev A
07/25/2016
Initial HTML document
Copyright Statement
Rajant, the Rajant logo, BreadCrumb, InstaMesh, BC|Commander, and Bring Your Network with You! are
registered trademarks of Rajant Corp. in the United States and certain other countries.
Rajant’s patented InstaMesh® networking software enables the network to quickly adapt to rapidlydeployed and moving network elements. U.S. Patents 9,001,645, US 9,001,645 B2 and US 9,319,922 B2
BreadCrumb® CX1 Version 11 User Guide
Copyright © 2009–2016 Rajant Corp. All rights reserved.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the device is operated in a commercial environment. This device generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with this instruction
manual, may cause harmful interference to radio communications. Operation of this device in a
residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at their own expense.
Antennas
 Antenna Installation WARNING
The BreadCrumb CX1 ships with 2dBi omni-directional antennas. SAR Compliance of the BreadCrumb
CX1 is contingent on the use of these antennas.
 IMPORTANT: Exposure to Radio Frequency Radiation
To satisfy FCC SAR RF exposure requirements for a body-worn device, the belt-clip must be used when
wearing the BreadCrumb CX1. The belt clip is shown in this figure: BreadCrumb CX1 Enclosure Features
(Back)
 Maximum Certified Transmit Power
The BreadCrumb CX1 is granted at a maximum total (combined) average conducted power of 21.6 dBm.
SAR compliance is contingent on operation of the wireless transmitter at this power level.
Safety
 Warning
The BreadCrumb CX1 is not user serviceable. Repair must be performed at a Rajant designated service
center by trained personnel.
 Warning
The BreadCrumb CX1 single board computer assembly contains a Lithium coin cell battery.
Replacement of this battery should never be attempted by the user. The battery must be replaced by
authorized repair personnel trained by Rajant Corporation. CAUTION: Risk of explosion if battery is
replaced by an incorrect type. Dispose of used batteries according to the battery manufacturer’s
instructions.
Modifications
 CAUTION
Changes or modifications not expressly approved by Rajant Corp. could void the user’s authority to
operate the equipment.
Rajant Products are compliant and warranted against manufacturing defects only so long as authorized
Rajant-authorized accessories are used in deployment of Rajant Breadcrumbs. It is the responsibility of
the operator and the installer to insure the system as installed operates within regional requirements.
Professional Installation Attestation
Rajant Corporation addresses the following items to ensure that the above referenced equipment is
professionally installed:
The device will only be sold by Rajant Corporation or one of its authorized dealers. Rajant Corporation
and its authorized dealers will be under strict marketing control and will only market and sell the device
to professionals.
Professional installation is required for this device and will be performed only by someone
knowledgeable of its use. Rajant Corporation will ensure that the device is only marketed and sold to
professionals.
The device is not sold to the general public and is sold only for industrial or commercial use by
professional installers.
Maximum Certified Power
The BreadCrumb CX1 may be operated at full certified power when configured with the granted antenna
type. Operation of a radio at power levels that exceed the EIRP of the granted configuration is prohibited.
See the tables below.
Table: Maximum Certified Power: FCC (United States), IC (Canada)
BreadCrumb
Model
Frequency
Range (MHz)
Maximum
Certified Total
Average
Conducted
Channel Power
(dBm)
CX1-3600
3655.9-3693.4
22.626
Antenna
Type
Omnidirectional
Antenna
Gain
(dBi)
Maximum
Certified
EIRP (dBm)
27.6363
GNU General Public License Statement
Certain components of the Rajant BreadCrumb firmware are subject to the GNU General Public License
Version 2, or other so-called open source licenses (“Open Source Software”). In compliance with the
terms of certain Open Source Software licenses like the GNU General Public License Version 2 (“GPLv2”),
Rajant makes certain modifications to Open Source Software that Rajant uses, modifies and distributes
pursuant to such licenses available to customers in source code form upon request. You are free to use,
modify and distribute Open Source Software so long as you comply with the terms of the relevant Open
Source Software license. In particular, the GPLv2 is available in the appendix of this manual or at
 http://www.gnu.org/copyleft/gpl.html.
Preface
Purpose and Scope
This manual provides information and guidance to all personnel who are involved with and use Rajant
Corporation’s BreadCrumb CX1.
This manual begins with an introduction to the BreadCrumb Kinetic Mesh Network. It then characterizes
the features of the BreadCrumb CX1. Finally, it describes common deployment scenarios and provides
concise step-by-step instructions for each scenario.
 Note
Throughout this document, unless otherwise stated, the terms CX1 and BreadCrumb are used to refer
to Rajant BreadCrumb CX1.
How to Use This Guide
This User Guide is an HTML document and is read using a web browser. The browser’s right scroll bar,
mouse scroll wheel, up/down cursor keys or Page Up/Page Down keys may be used to navigate
sequentially forward or backward through the guide. In most browsers, CTRL-F can be used to search the
guide and navigate to matching text. The Table of Contents at the left (or top for small windows) contains
links to the starts of chapters and appendices. After a web link or cross-reference is clicked in the guide,
the browser’s back arrow should return to the previous page location.
Feedback Welcome
The user of this manual is encouraged to submit comments and recommended changes to improve this
manual and all Rajant products. Please send your feedback to  support@rajant.com. Please be sure to
include the version and revision number of the manual or product you are using as well as the relevant
document section numbers if appropriate.
Related Documentation
For additional information, refer to these documents:
• BC|Commander® Version 11 User Guide: This document contains information on the BC|Commander
management application, which is used to configure BreadCrumbs before or during a deployment.
• BreadCrumb® Security Technical Brief
These documents are available in the support section of Rajant’s website at  http://www.rajant.com.
1. Introduction to BreadCrumbs
Rajant Corporation’s ( http://www.rajant.com) BreadCrumbs utilize the 802.11 wireless networking
standards to form a wireless mesh network. The network is mobile, self-integrating, self-meshing, selfhealing, and secure. The focus is on flexibility, adaptability, and simplicity.
The BreadCrumb Kinetic Mesh Network is intended for rapid deployment of a broadband wireless
network into a situation or “hot zone.” The network can be deployed as a stand-alone wireless network,
or bridged to another network (such as the Internet) utilizing available reach-back communication links
(such as a DSL, cable, or satellite modem).
BreadCrumbs provide high bandwidth for applications to stream video, audio and data over large
distances. The network traffic can be secured by using different security features available on the
BreadCrumb. This makes the network optimal for tactical deployments as well as emergency response
situations since it offers robustness, stability and ease of setup in mission critical activities.
1.1 What is a BreadCrumb?
A BreadCrumb is an IEEE 802.11 (Wi-Fi) and Ethernet compatible networking device with the ability to
connect to other BreadCrumbs or networking devices to form a BreadCrumb network. The BreadCrumb
is specifically designed for the following scenarios:
• Temporary Wireless Networks: Networks that must be established quickly and with minimal effort
for short-term use (e.g., a network established to provide a temporary network in a tactical
situation).
• Mobile Wireless Networks: Networks in which the network infrastructure itself is mobile, in
addition to client devices (e.g., a convoy viewing a video stream from a UAV).
• Wireless Network Extension: Networks in which a wireless network must be quickly extended
around or through obstacles that block wireless communications (e.g., urban canyon networks,
tunnels/caves, etc.)
• Wired Network Extension: Networks in which two or more wired LANs at different locations must
be connected wirelessly (e.g., to securely connect combat service support computers with logistics
bases)
• Any Combination of the Above: Most BreadCrumb deployments include elements from more than
one of the above scenarios.
In many cases, BreadCrumbs will perform all of these tasks as shipped with no configuration necessary at
all, providing an instant TAN (Tactical Area Network). Moreover, because BreadCrumbs use industrystandard 802.11 communications, client devices such as laptops, or cell phones require no special
hardware, software, and little or no configuration to access a BreadCrumb network.
 Note
Although all BreadCrumbs can be access points, most access points do not provide mesh capability.
Traditional access points simply allow wireless devices within range to connect to a wired network;
they do not extend range through other access points.
1.2 The Mesh Network
The key component of a BreadCrumb Mesh network is the ability for BreadCrumbs to connect, or mesh
with each other. While this is generally handled automatically by BreadCrumbs, complex deployment
scenarios require a basic understanding of how BreadCrumbs establish and maintain a mesh.
1.2.1 Mesh – A Definition
A mesh is a collection of BreadCrumbs (or other network devices), each of which is linked to one or more
other BreadCrumbs. Data can move between BreadCrumbs via these links, possibly passing through
several intermediate BreadCrumbs before arriving at its final destination.
The intelligence of a BreadCrumb network is in how it adapts rapidly to the creation or destruction of the
links in the mesh as devices are moved, switched OFF or ON, blocked by obstructions, interfered with by
other devices, or otherwise affected. This adaptation takes place automatically and immediately as
needed.
1.2.2 BreadCrumb Mesh Connections
In order for two BreadCrumbs to establish a mesh link to each other, they must be set to the same radio
channel and have the same Network ID. The Network ID is computed from:
• Network Name (simply a configurable name for the network, default is “Rajant Mesh Network”)
• Network Key (a passphrase or key used for establishing mesh connections and obfuscating
unencrypted network management traffic)
• Packet cipher setting
• MAC cipher setting
• Per-hop verification setting
• Key Sequence Number (defaults to 0)
To modify these settings via BC|Commander, the administrator must be logged in using the Crypto
Officer credentials.
2. Description of a BreadCrumb CX1
BreadCrumb CX1 is a portable, wireless device deployable in most environments. It is light in weight,
includes 2 external antennas and is designed to be completely mobile as worn by an individual. The
BreadCrumb CX1 is powered by a removeable rechargeable battery.
2.1 Radios
The BreadCrumb CX1 contains one radio in the 3.6 GHz band.
2.2 Enclosure
The CX1 enclosure has been designed to be splashproof when an etherCON cable is attached and the
battery door is closed. The enclosure dimensions are 133 mm x 128 mm x 59 mm (5.246" x 5.013" x
2.304") including antennas and without the belt clip (the belt clip is installed by the integrator). The
external features of the enclosure are shown in the following figures:
Figure: BreadCrumb CX1 Enclosure Features (Front)
Figure: BreadCrumb CX1 Enclosure Features (Back)
2.3 Antenna Connectors
The BreadCrumb CX1 provides two antennas located on the top of the enclosure (see the Enclosure Top
figure above). The CX1 offers antenna diversity and Multiple-Input and Multiple-Output (MIMO) features
so two antenna ports are utilized by the single radio.
Figure: BreadCrumb CX1 Enclosure (Top)
 Warning
If it is necessary to service the antennas, to avoid possible damage to the BreadCrumb radio(s), always
connect or disconnect external antennas with the power to the BreadCrumb CX1 turned off.
2.4 etherCON Connector
The etherCON connector of the BreadCrumb CX1 provides Ethernet and also outputs 500 mA of current at
the voltage of the removeable rechargeable battery. The etherCON connector’s power is required by the
Green Go beltpack.
 Warning
The output power on the CX1 etherCON connector may damage normal Ethernet ports on laptops and
other devices. When connecting the CX1 etherCON to any device other than the Green Go beltpack, a
customized Ethernet cable with no power lines must be used.
Figure: BreadCrumb CX1 Enclosure (Bottom)
2.5 Power Requirements
The BreadCrumb CX1 is powered by a removable rechargeable smart lithium ion battery, Rajant part
number 49-100009-001 Inspired Energy NC2040HD34, Battery, 10.8 V, 3.4 Ah, 37 Wh. The battery body is
keyed to assist in proper insertion. When the battery is inserted into the CX1, the rectangular tab should
be folded away from the battery gauge display on the end of the battery. The battery compartment door
can then be clipped in the closed position.
The BreadCrumb CX1 does not include a battery charger. An external charger is required to charge the
CX1 battery.
Figure: BreadCrumb CX1 Battery
Battery Safety
Handling
•
•
•
•
•
•
•
Avoid shorting the battery.
Do not immerse in water.
Do not disassemble or deform the battery.
Do not expose to, or dispose of the battery in fire.
Avoid excessive physical shock or vibration.
Keep out of the reach of children.
Never use a battery that appears to have suffered abuse.
Charge & Discharge
• Battery must be charged in appropriate charger only.
• Never use a modified or damaged charger.
Storage
• Store in a cool, dry and well ventilated area.
Disposal
• Regulations vary for different countries. Dispose of in accordance with local regulations.
2.6 Status LED
The Status LED is capable of displaying warning and error codes, and link states. The LED Mode can be
configured in BC|Commander to be ON (switchable), ALERTS ONLY (switchable), OFF (non-switchable), or
OFF (switchable). When the LED Mode is ON, the BreadCrumb LED alternates between displaying the link
state and any warnings or errors. When the LED Mode is OFF, the BreadCrumb LED does not display any
warnings, errors, or the link state. When the LED Mode is set for ALERTS ONLY, the BreadCrumb LED
alternates between displaying the link state and any warnings or errors only if there are warnings or
errors to report. If there are no warnings or errors, the LED displays nothing.
The Status LED combines the three base colors of red, green and blue to display a broader spectrum of
colors which indicate the current status of a BreadCrumb. The meanings of the color code indicators are
given in the following table.
Table: Status LED Color Codes
Color
Status
White (red, green and blue LEDs together; may
appear pale blue or pale green)
Powered on; start of boot process
Red-Blue-Green scrolling in succession
End of successful boot process
Color
Status
Solid Blue
Ready, but no connected Mesh peers (unit may
have Ethernet peers)
Blinking Green
At least one connected Mesh peer; all peers are
connected at less than 24 Mbps
Solid Green
At least one connected Mesh peer; one or more
peers are connected at 24 Mbps or faster
Blinking Yellow (with short and long pauses
between blinks)
Numeric warning code
Blinking Red (with short and long pauses
between blinks)
Numeric error code
Blinking Yellow (blinking at an increasing rate)
BreadCrumb is in the process of installing
firmware
All LED colors scrolling in rapid succession
(with a short pause between every cycle)
Successful firmware installation; ready to reboot
All LED colors scrolling in rapid succession
(with no pause)
Identify mode is ON
For more information on BreadCrumb Status LED numeric codes see Appendix Error and Warning Codes.
For a list of error and warning codes refer to Appendix Error and Warning Codes.
3. Appendices
Appendix A: Error and Warning Codes
All possible BreadCrumb error and warning codes are listed below.
Numeric error codes are displayed as groups of red (error) or yellow (warning) LED blinks. For example, a
meshed BreadCrumb displays a green LED. If the BreadCrumb starts to display warning 37, the following
would be seen: green (link state), yellow blinks 3 times, short pause, yellow blinks 7 times, long pause of
green (link state), yellow blinks 3 times, short pause, yellow blinks 7 times, etc.
Code
Firmware Upgrade Codes (1*)
11
Flash image file does not exist.
12
Current flash image version is greater than versions of files found on USB drive.
13
No flash image files found.
14
Unable to mount USB drive.
15
Unable to retrieve next boot image number.
16
Unable to set fail safe boot mode.
17
Unlocking of /dev/mtd0 failed.
18
fconfig for SetMainBoot failed.
19
Copying of zImage failed.
111
Copying of ramdisk failed.
112
FIS directory update of ramdisk failed.
113
Copying of etc failed.
114
FIS directory update of /etc failed.
115
Copying failed.
116
Flash unbundle failed.
117
Version information in flash file name and breadcrumb-buildinfo.conf do not match.
1171
Platform information in flash file name and breadcrumb-buildinfo.conf do not match.
118
Untar failed.
119
FIS directory update of kernel failed.
121
Failed to unmount /etc.
122
In Failsafe mode, but no USB drive detected.
Code
Firmware Upgrade Codes (1*)
123
BreadCrumb will be in failsafe mode and unable to communicate with other BreadCrumbs
after next reboot.
124
Failed to suspend bcconfigd.
125
Failed to set boot path to next image.
126
Failed to erase end of next file system image.
127
Failed to copy file system image.
128
Failed to checksum file system image.
129
Failed to create directory for next file system image.
131
Failed to mount next file system image.
132
Failed to create directory for settings.
133
Failed to copy current settings to next file system image.
134
Failed to unmount next file system image.
135
Failed to copy init image.
136
Failed to copy bootloader image.
137
This flash image may not be installed onto this BreadCrumb.
138
Failed to copy failsafe file system.
141
Error retrieving flash file.
142
The version you are installing does not support the configured Packet Cipher
143
The version you are installing does not support the configured MAC Address Cipher
144
The version you are installing does not support the configured Per-hop Authentication
algorithm
145
The version you are installing does not support the configured security policy
146
Failed to verify consistent country settings
147
The configured countries are not consistent
151
Pre-manufacturing install process failed
152
Firmware install failed
153
Post-manufacturing install process failed
154
The autorun is missing required symbols
Code
Firmware Upgrade Codes (1*)
21
Recovery log detected. To clear this message, please take a diagnostic snapshot and
upload to https://secure.rajant.com.
22
Internal error detected. Please take a diagnostic snapshot and
https//secure.rajant.com. This message will be cleared on the next reboot.
Code
Self-Test Codes (3*)
31
Hardware configuration not set. Factory initialization required.
311
Hardware error detected.
32
BreadCrumb has been zeroized.
321
BreadCrumb is being zeroized.
33
Radio(s) not detected.
331
Radio in MANUAL compliance mode is violating country regulation.
332
Spectrum Access not granted
333
Low Battery
334
Gas gauge not initialized. To initialize, please power off unit and fully charge.
34
Cannot read /dev/nand6 information, or cannot resize or format /dev/nand6.
36
Hardware monitor missing.
37
Failed to configure ethernet port
38
Resetting radio due to error.
381
Noise floor threshold exceeded
382
Radar detection paused radio
383
Radio resumed from radar pause
385
Radio(s) failed to initialize
Code
FIPS Codes (4*)
41
FIPS Power-on self-tests failed.
411
FIPS DRBG power-on self test failed.
412
FIPS DRBG continuous test failed.
413
FIPS DRBG health check failed.
upload
to
Code
Firmware Upgrade Codes (1*)
414
Kernel integrity check failed.
415
Filesystem integrity check failed.
416
FIPS USB test vector data missing.
417
FIPS Invalid configuration.
418
Flash image may not be installed while in FIPS mode.
42
Mixed SecNet/Non-SecNet configuration.
43
Rekeying error.
44
Rekeying error.
45
Rekeying error.
46
Rekeying error.
47
Rekeying error.
48
Rekeying error.
49
Rekeying error.
431
Rekeying error.
432
Rekeying error.
433
Rekeying error.
434
Rekeying error.
435
Rekeying error.
436
Rekeying error.
441
Status override CPLD feature not available (wrong CPLD version).
Code
Fatal and Serious Codes (5*)
51
instamesh fatal error.
52
hostapd fatal error.
521
disabling HT40 operation to prevent conflict with a nearby BSS
522
IEEE 802.11 TKIP countermeasures initiated
53
Taking over as APT master
54
fatal error.
Code
Firmware Upgrade Codes (1*)
541
Software error
55
Low memory - automatic reboot scheduled.
56
APT peer bridge settings do not match
57
logwatcher start timeout
Code
Battery Gas Gauge Codes (6*)
61
Battery gas gauge i2c device could not be found.
62
Incorrect gas gauge revision 1 EEPROM settings.
63
Incorrect gas gauge revision 2 EEPROM settings.
64
Incorrect gas gauge revision 3 EEPROM settings.
65
Unknown gas gauge revision.
66
Incorrect ME3 gas gauge revision 0 EEPROM settings.
67
Internal battery charger disabled.
Code
Other Codes (7, 8, 9*)
71
Host flapping detected.
72
Critical I2C failure.
73
Invalid channel configured.
74
Bad factory configuration.
741
Signing key installation failure.
75
Unsupported hardware component.
76
Potential loop detected, turned off port
77
Model is not supported in this version of firmware. Contact support.
81
reserved
811
Default Network Key is in use.
82
reserved
83
reserved
84
reserved
85
reserved
Code
Firmware Upgrade Codes (1*)
86
reserved
87
reserved
88
reserved
89
reserved
91
Invalid SSL Handshake Priority String:
Appendix B: Ports and Protocols
Table: Ports and Protocols
Service
From
To
Protocol
Ephemeral port on
BC|Commander
workstation
224.0.0.224, port 35057 (UDP IPv4
multicast); FF02::1, port 35057 (UDP
IPv6 multicast); BreadCrumb IPv4 or
IPv6 addresses, port 35057 (UDP
IPv4 or IPv6 unicast)
IPv4 UDP,
IPV6 UDP
BreadCrumb
Discovery
BreadCrumb IPv4 or
IPv6 address, port
35057
Ephemeral port on BC|Commander
workstation (UDP IPv4 or IPv6
unicast);FF02::1, port 35057 (UDP
IPv6 multicast) at BreadCrumb
startup
IPv4 UDP,
IPv6 UDP
BCAPI
(BC|Commander)
Ephemeral port on
BC|Commander
workstation
BreadCrumb IPv4 or IPv6 addresses,
port 2300 (default)
IPv4 TCP,
IPv6 TCP
BC|Connector
Ephemeral port on
BC|Connector
workstation
BreadCrumb IPv4 or IPv6 addresses,
port 23000
IPv4 UDP,
IPV6 UDP
APT Discovery - v10
Compatibility Mode
BreadCrumb ethernet
interface, raw
ethernet
FF:FF:FF:FF:FF:FF (raw Ethernet
broadcast)
ARP (see
note
below)
APT - v10
Compatibility Mode
BreadCrumb ethernet
interface IPv6 linklocal address,
ephemeral port
BreadCrumb ethernet interface IPv6
link-local address port 2210 for the
service listener, ephemeral port for
data flow
IPv6 UDP
APT - v11
BreadCrumb ethernet
interface IPv6 linklocal address,
ephemeral port
BreadCrumb ethernet interface IPv6
link-local address port 2210 for the
service listener, ephemeral port for
data flow
IPv6 UDP
RPT
BreadCrumb IPv4 or
IPv6 address,
ephemeral port
BreadCrumb IPv4 or IPv6 address,
SCTP port 2210 for the service
listener, ephemeral port for data
flow
IPv4 or
IPv6 SCTP
BreadCrumb
Discovery
TRoIP Audio RTP
Traffic
IPv4 multicast address
225.0.0.1-225.0.2.255 port 24680
IPv4 UDP
Service
From
To
Protocol
BreadCrumb configured TCP port
(default:5825)
IPv4 TCP
BreadCrumb IPv4
address, ephemeral
port
Remote Packet
Capture
Remote Packet
Capture Client
(typically RRADS)
 Note
APT Discovery in v10 Compatibility Mode may be truncated by some third-party equipment.
Appendix C: Rajant End User License Agreement
The BreadCrumb® Wireless LAN System
Rajant Corporation End User License Agreement
IMPORTANT: PLEASE READ THIS END USER LICENSE AGREEMENT CAREFULLY. IT IS ENCLOSED IN THE
SOFTWARE PACKAGE AND /OR PRESENTED ELECTRONICALLY WHEN ACCESSING THE SOFTWARE. BY
CLICKING “I AGREE”, YOU ARE AGREEING TO BE BOUND BY THE TERMS OF THIS LICENSE. IT IS VERY
IMPORTANT THAT YOU CHECK THAT YOU ARE PURCHASING RAJANT SOFTWARE OR EQUIPMENT FROM
AN APPROVED SOURCE AND THAT YOU, OR THE ENTITY YOU REPRESENT (COLLECTIVELY, THE
“CUSTOMER”) HAVE BEEN REGISTERED AS THE END USER FOR THE PURPOSES OF THIS RAJANT END
USER LICENSE AGREEMENT. IF YOU ARE NOT REGISTERED AS THE END USER YOU HAVE NO LICENSE TO
USE THE SOFTWARE AND THE LIMITED WARRANTY IN THIS END USER LICENSE AGREEMENT DOES NOT
APPLY. ASSUMING YOU HAVE PURCHASED FROM AN APPROVED SOURCE, DOWNLOADING, INSTALLING
OR USING RAJANT OR RAJANT-SUPPLIED SOFTWARE CONSTITUTES ACCEPTANCE OF THIS AGREEMENT.
RAJANT CORPORATION OR ITS AFFILIATE LICENSING THE SOFTWARE (“RAJANT”) IS WILLING TO LICENSE
THIS SOFTWARE TO YOU ONLY UPON THE CONDITION THAT YOU PURCHASED THE SOFTWARE FROM AN
APPROVED SOURCE AND THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS END USER LICENSE
AGREEMENT PLUS ANY ADDITIONAL LIMITATIONS ON THE LICENSE SET FORTH IN A SUPPLEMENTAL
LICENSE AGREEMENT ACCOMPANYING THE PRODUCT OR AVAILABLE AT THE TIME OF YOUR ORDER
(COLLECTIVELY THE “AGREEMENT”). TO THE EXTENT OF ANY CONFLICT BETWEEN THE TERMS OF THIS
END USER LICENSE AGREEMENT AND ANY SUPPLEMENTAL LICENSE AGREEMENT, THE SUPPLEMENTAL
LICENSE AGREEMENT SHALL APPLY. BY DOWNLOADING, INSTALLING, OR USING THE SOFTWARE, YOU
ARE REPRESENTING THAT YOU PURCHASED THE SOFTWARE FROM AN APPROVED SOURCE AND BINDING
YOURSELF TO THE AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE TERMS OF THE AGREEMENT,
THEN RAJANT IS UNWILLING TO LICENSE THE SOFTWARE TO YOU AND (A) YOU MAY NOT DOWNLOAD,
INSTALL OR USE THE SOFTWARE, AND (B) YOU MAY RETURN THE SOFTWARE (INCLUDING ANY
UNOPENED PACKAGE AND ANY WRITTEN MATERIALS) FOR A FULL REFUND, OR, IF THE SOFTWARE AND
WRITTEN MATERIALS ARE SUPPLIED AS PART OF ANOTHER PRODUCT, YOU MAY RETURN THE ENTIRE
PRODUCT FOR A FULL REFUND. YOUR RIGHT TO RETURN AND REFUND EXPIRES 30 DAYS AFTER
PURCHASE FROM AN APPROVED SOURCE, AND APPLIES ONLY IF YOU ARE THE ORIGINAL AND
REGISTERED END USER PURCHASER. FOR THE PURPOSES OF THIS END USER LICENSE AGREEMENT, AN
“APPROVED SOURCE” MEANS (A) RAJANT; OR (B) A DISTRIBUTOR OR SYSTEMS INTEGRATOR
AUTHORIZED BY RAJANT TO DISTRIBUTE / SELL RAJANT EQUIPMENT, SOFTWARE AND SERVICES WITHIN
YOUR TERRITORY TO END USERS; OR © A RESELLER AUTHORIZED BY ANY SUCH DISTRIBUTOR OR
SYSTEMS INTEGRATOR IN ACCORDANCE WITH THE TERMS OF THE DISTRIBUTOR’S AGREEMENT WITH
RAJANT TO DISTRIBUTE / SELL THE RAJANT EQUIPMENT, SOFTWARE AND SERVICES WITHIN YOUR
TERRITORY TO END USERS.
THE FOLLOWING TERMS OF THE AGREEMENT GOVERN CUSTOMER’S USE OF THE SOFTWARE (DEFINED
BELOW), EXCEPT TO THE EXTENT: (A) THERE IS A SEPARATE SIGNED CONTRACT BETWEEN CUSTOMER
AND RAJANT GOVERNING CUSTOMER’S USE OF THE SOFTWARE, OR (B) THE SOFTWARE INCLUDES A
SEPARATE “CLICK-ACCEPT” LICENSE AGREEMENT OR THIRD PARTY LICENSE AGREEMENT AS PART OF
THE INSTALLATION OR DOWNLOAD PROCESS GOVERNING CUSTOMER’S USE OF THE SOFTWARE. TO THE
EXTENT OF A CONFLICT BETWEEN THE PROVISIONS OF THE FOREGOING DOCUMENTS, THE ORDER OF
PRECEDENCE SHALL BE (1)THE SIGNED CONTRACT, (2) THE CLICK-ACCEPT AGREEMENT OR THIRD PARTY
LICENSE AGREEMENT, AND (3) THE AGREEMENT. FOR PURPOSES OF THE AGREEMENT, “SOFTWARE”
SHALL MEAN COMPUTER PROGRAMS, INCLUDING FIRMWARE AND COMPUTER PROGRAMS EMBEDDED IN
RAJANT EQUIPMENT, AS PROVIDED TO CUSTOMER BY AN APPROVED SOURCE, AND ANY UPGRADES,
UPDATES, BUG FIXES OR MODIFIED VERSIONS THERETO (COLLECTIVELY, “UPGRADES”), ANY OF THE
SAME WHICH HAS BEEN RELICENSED UNDER THE RAJANT SOFTWARE TRANSFER AND RE-LICENSING
POLICY (AS MAY BE AMENDED BY RAJANT FROM TIME TO TIME) OR BACKUP COPIES OF ANY OF THE
FOREGOING.
License. Conditioned upon compliance with the terms and conditions of the Agreement, RAJANT grants
to Customer a nonexclusive and nontransferable license to use for Customer’s internal business
purposes the Software and the Documentation for which Customer has paid the required license fees to
an Approved Source. “Documentation” means written information (whether contained in user or
technical manuals, training materials, specifications or otherwise) pertaining to the Software and made
available by an Approved Source with the Software in any manner (including on CD-Rom, or on-line). In
order to use the Software, Customer may be required to input a registration number or product
authorization key and register Customer’s copy of the Software online at RAJANT’S website to obtain the
necessary license key or license file.
Customer’s license to use the Software shall be limited to, and Customer shall not use the Software in
excess of, a single hardware chassis or card or such other limitations as are set forth in the applicable
Supplemental License Agreement or in the applicable purchase order which has been accepted by an
Approved Source and for which Customer has paid to an Approved Source the required license fee (the
“Purchase Order”).
Unless otherwise expressly provided in the Documentation or any applicable Supplemental License
Agreement, Customer shall use the Software solely as embedded in, for execution on, or (where the
applicable Documentation permits installation on non- RAJANT equipment) for communication with
RAJANT equipment owned or leased by Customer and used for Customer’s internal business purposes.
No other licenses are granted by implication, estoppel or otherwise.
For evaluation or beta copies for which Rajant does not charge a license fee, the above requirement to
pay license fees does not apply.
General Limitations. This is a license, not a transfer of title, to the Software and Documentation, and
Rajant retains ownership of all copies of the Software and Documentation. Customer acknowledges that
the Software and Documentation contain trade secrets of Rajant or its suppliers or licensors, including
but not limited to the specific internal design and structure of individual programs and associated
interface information. Except as otherwise expressly provided under the Agreement, Customer shall only
use the Software in connection with the use of Rajant equipment purchased by the Customer from an
Approved Source and Customer shall have no right, and Customer specifically agrees not to:
(i) transfer, assign or sublicense its license rights to any other person or entity (other than in compliance
with any Rajant relicensing/transfer policy then in force), or use the Software on Rajant equipment not
purchased by the Customer from an Approved Source or on secondhand Rajant equipment, and
Customer acknowledges that any attempted transfer, assignment, sublicense or use shall be void;
(ii) make error corrections to or otherwise modify or adapt the Software or create derivative works based
upon the Software, or permit third parties to do the same;
(iii) reverse engineer or decompile, decrypt, disassemble or otherwise reduce the Software to humanreadable form, except to the extent otherwise expressly permitted under applicable law notwithstanding
this restriction or except to the extent that Rajant is legally required to permit such specific activity
pursuant to any applicable open source license;
(iv) publish any results of benchmark tests run on the Software;
(v) use or permit the Software to be used to perform services for third parties, whether on a service
bureau or time sharing basis or otherwise, without the express written authorization of Rajant; or
(vi) disclose, provide, or otherwise make available trade secrets contained within the Software and
Documentation in any form to any third party without the prior written consent of Rajant. Customer shall
implement reasonable security measures to protect such trade secrets.
To the extent required by applicable law, and at Customer’s written request, Rajant shall provide
Customer with the interface information needed to achieve interoperability between the Software and
another independently created program, on payment of Rajant’s applicable fee, if any. Customer shall
observe strict obligations of confidentiality with respect to such information and shall use such
information in compliance with any applicable terms and conditions upon which Rajant makes such
information available.
Software, Upgrades and Additional Copies. NOTWITHSTANDING ANY OTHER PROVISION OF THE
AGREEMENT: (1) CUSTOMER HAS NO LICENSE OR RIGHT TO MAKE OR USE ANY ADDITIONAL COPIES OR
UPGRADES UNLESS CUSTOMER, AT THE TIME OF MAKING OR ACQUIRING SUCH COPY OR UPGRADE,
ALREADY HOLDS A VALID LICENSE TO THE ORIGINAL SOFTWARE AND HAS PAID THE APPLICABLE FEE TO
AN APPROVED SOURCE FOR THE UPGRADE OR ADDITIONAL COPIES; (2) USE OF UPGRADES IS LIMITED TO
RAJANT EQUIPMENT SUPPLIED BY AN APPROVED SOURCE FOR WHICH CUSTOMER IS THE ORIGINAL END
USER PURCHASER OR LESSEE OR OTHERWISE HOLDS A VALID LICENSE TO USE THE SOFTWARE WHICH IS
BEING UPGRADED; AND (3) THE MAKING AND USE OF ADDITIONAL COPIES IS LIMITED TO NECESSARY
BACKUP PURPOSES ONLY.
Proprietary Notices. Customer agrees to maintain and reproduce all copyright, proprietary, and other
notices on all copies, in any form, of the Software and Documentation in the same form and manner that
such copyright and other proprietary notices are included on the Software. Except as expressly
authorized in the Agreement, Customer shall not make any copies or duplicates of any Software without
the prior written permission of Rajant.
Term and Termination. The Agreement and the license granted herein shall remain effective until
terminated. Customer may terminate the Agreement and the license at any time by destroying all copies
of Software and any Documentation. Customer’s rights under the Agreement will terminate immediately
without notice from RAJANT if Customer fails to comply with any provision of the Agreement. Upon
termination, Customer shall destroy or return to RAJANT all copies of Software and Documentation in its
possession or control. All confidentiality obligations of Customer, all restrictions and limitations imposed
on the Customer under the section titled “General Limitations” and all limitations of liability and
disclaimers and restrictions of warranty shall survive termination of this Agreement. In addition, the
provisions of the sections titled “U.S. Government End User Purchasers” and “General Terms Applicable
to the Limited Warranty Statement and End User License Agreement” shall survive termination of the
Agreement.
Customer Records. Customer grants to RAJANT and its independent accountants the right to examine
Customer’s books, records, accounts, and network configuration(s) during Customer’s normal business
hours to verify compliance with this Agreement. In the event such audit discloses non-compliance with
this Agreement, Customer shall promptly pay to RAJANT the appropriate license fees, plus the
reasonable cost of conducting the audit.
Export, Re-Export, Transfer and Use Controls. The Software, Documentation and technology or direct
products thereof (hereafter referred to as Software and Technology), supplied by RAJANT under the
Agreement are subject to export controls under the laws and regulations of the United States (“U.S.”) and
any other applicable countries' laws and regulations. Customer shall comply with such laws and
regulations governing export, re-export, import, transfer and use of RAJANT Software and Technology
and will obtain all required U.S. and local authorizations, permits, or licenses. RAJANT and Customer
each agree to provide the other information, support documents, and assistance as may reasonably be
required by the other in connection with securing authorizations or licenses. Information regarding
compliance with export, re-export, transfer and use.
U.S. Government End User Purchasers. The Software and Documentation qualify as “commercial items,”
as that term is defined at Federal Acquisition Regulation (“FAR”) (48 C.F.R.) 2.101, consisting of
“commercial computer software” and “commercial computer software documentation” as such terms
are used in FAR 12.212. Consistent with FAR 12.212 and DoD FAR Supp. 227.7202-1 through 227.7202-4,
and notwithstanding any other FAR or other contractual clause to the contrary in any agreement into
which the Agreement may be incorporated, Customer may provide to Government end user or, if the
Agreement is direct, Government end user will acquire, the Software and Documentation with only those
rights set forth in the Agreement. Use of either the Software or Documentation or both constitutes
agreement by the Government that the Software and Documentation are “commercial computer
software” and “commercial computer software documentation,” and constitutes acceptance of the
rights and restrictions herein.
Identified Components; Additional Terms. The Software may contain or be delivered with one or more
components, which may include third-party components, identified by RAJANT in the Documentation,
readme.txt file, third-party click-accept or elsewhere (e.g. on www.rajant.com) (the “Identified
Component(s)”) as being subject to different license agreement terms, disclaimers of warranties, limited
warranties or other terms and conditions (collectively, “Additional Terms”) than those set forth herein.
You agree to the applicable Additional Terms for any such Identified Component(s).
Limited Warranty
Subject to the limitations and conditions set forth herein, RAJANT warrants that commencing from the
date of shipment to Customer (but in case of resale by an Approved Source other than RAJANT,
commencing not more than ninety (90) days after original shipment by RAJANT), and continuing for a
period of the longer of (a) ninety (90) days or (b) the warranty period (if any) expressly set forth as
applicable specifically to software in the warranty card accompanying the product of which the Software
is a part (the “Product”) (if any): (a) the media on which the Software is furnished will be free of defects in
materials and workmanship under normal use; and (b) the Software substantially conforms to the
Documentation. The date of shipment of a Product by RAJANT is set forth on the packaging material in
which the Product is shipped. Except for the foregoing, the Software is provided “AS IS”. This limited
warranty extends only to the Software purchased from an Approved Source by a Customer who is the
first registered end user. Customer’s sole and exclusive remedy and the entire liability of RAJANT and its
suppliers under this limited warranty will be (i) replacement of defective media and/or (ii) at RAJANT’s
option, repair, replacement, or refund of the purchase price of the Software, in both cases subject to the
condition that any error or defect constituting a breach of this limited warranty is reported to the
Approved Source supplying the Software to Customer, within the warranty period. RAJANT or the
Approved Source supplying the Software to Customer may, at its option, require return of the Software
and/or Documentation as a condition to the remedy. In no event does RAJANT warrant that the Software
is error free or that Customer will be able to operate the Software without problems or interruptions. In
addition, due to the continual development of new techniques for intruding upon and attacking
networks, RAJANT does not warrant that the Software or any equipment, system or network on which
the Software is used will be free of vulnerability to intrusion or attack.
No representation or other affirmation of fact, including but not limited to statements regarding
capacity, suitability for use or performance of Software, whether made by Rajant employees or
otherwise, shall be deemed to be a warranty for any purpose or give rise to any liability of Rajant
whatsoever unless contained in this Agreement.
Restrictions. This warranty does not apply if the Software, Product or any other equipment upon which
the Software is authorized to be used (a) has been altered, except by RAJANT or its authorized
representative, (b) has not been installed, operated, repaired, or maintained in accordance with
instructions supplied by RAJANT, © is assembled or deployed with non-authorized Rajant accessories;
(d) has been subjected to abnormal physical or electrical stress, abnormal environmental conditions,
misuse, negligence, or accident; or (e) is licensed for beta, evaluation, testing or demonstration
purposes. The Software warranty also does not apply to (f) any temporary Software modules; (g) any
Software not posted on RAJANT’s Software Center; (h) any Software that RAJANT expressly provides on
an “AS IS” basis on RAJANT’s Software Center; (i) any Software for which an Approved Source does not
receive a license fee; and (i) Software supplied by any third party which is not an Approved Source.
Hardware Limited Warranty
THE BREADCRUMB WIRELESS LAN UNITS (“BREADCRUMB”), EXCLUSIVE OF THE JR-2 BREADCRUMB,
PROVIDED UNDER THIS AGREEMENT ARE PROVIDED WITH A 1-YEAR WARRANTY FROM THE DATE THE
BREADCRUMB IS SHIPPED BY RAJANT AGAINST DEFECTS IN WORKMANSHIP OR MATERIAL UNDER
ORDINARY USE. SUCH WARRANTY APPLIES ONLY TO THE BREADCRUMB DEVICE AND DOES NOT EXTEND
TO ANY OTHER PRODUCTS, PRODUCTS OR SERVICES, INCLUDING BUT NOT LIMITED TO POWER
SUPPLIES, CABLES, ANTENNAS, AND MOUNTING BRACKETS, EVEN IF PACKAGED OR SOLD WITH THE
BREADCRUMB.
JR-2 BREADCRUMBS ARE WARRANTED ONLY AGAINST DEFECTIVE WORKMANSHIP FOR 90 DAYS WHEN
DELIVERED NEW. RAJANT MAKES NO WARRANTY, AND DISCLAIMS ANY WARRANTY, EXPRESS OR IMPLIED
AT LAW, ON JR-2 BREADCRUMBS' FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY.
MANUFACTURER’S RMA POLICIES AND PROCEDURES APPLY.
RAJANT PRODUCTS CLASSIFIED AS ACCESSORY ON MANUFACTURER’S PRICE LIST ARE WARRANTED
AGAINST DEFECTS FOR A PERIOD OF 90 DAYS FROM DATE OF DELIVERY.
THE RAJANT HARDWARE LIMITED WARRANTY ONLY APPLIES WHEN GENUINE RAJANT HARDWARE AND
AUTHORIZED ACCESSORIES ARE USED BY THE INSTALLER AND END USER. USE OF ANY NONAUTHORIZED ACCESSORIES OR PERIPHERAL EQUIPMENT VOIDS THE RAJANT LIMITED HARDWARE
LIMITED WARRANTY.
Unless otherwise listed on this Warranty Schedule, Rajant warrants to the purchaser that the Products
will perform in all material respects in accordance with their written specifications for a period of ninety
(90) days from the date the Products are shipped by Rajant. Reseller and purchaser’s sole and exclusive
right and remedy, and Rajant’s sole and exclusive obligation and liability, with respect to any breach of
the foregoing warranty shall be that, upon receipt by Rajant from Reseller or purchasers of written notice
of the breach in reasonable detail so as to permit Rajant to duplicate the failure to so perform, which
notice is received by Rajant within thirty (30) days after Reseller or purchaser discovers the failure, Rajant
shall – after duplicating the failure – exercise its commercially reasonable efforts to deliver to Reseller or
purchaser a replacement or repaired Product at Rajant’s discretion. Rajant replacement parts used in
such replacement may be new or equivalent to new. Rajant’s obligations hereunder are conditioned
upon the return of the affected Product in accordance with Rajant’s then-current Return Material
Authorization (RMA) procedures.
This warranty shall not apply to any Product that has been subjected to unusual physical, environmental
or electrical stress. The warranty shall not apply to any problems or non-performance directly resulting
from Reseller or purchaser’s hardware, software, network(s) and/or host system(s) or the combination,
operation or use of the Product with such hardware, software, network(s) and/or host system(s), or
which results from any alteration or modification to the Product or its components by anyone other than
Rajant. The warranty also does not cover any (a) Product for which the serial number has been removed
or made illegible; (b) freight costs to the repair center; © scratches or other cosmetic damage to Product
surfaces that do not affect the operation of the Product; and (d) normal and customary wear and tear.
The date of shipment of a Product by Rajant is set forth on the packaging material in which the Product is
shipped. This limited warranty extends only to the original user of the Product.
Replacement, Repair or Refund Procedure for Products Covered by Warranty
Rajant will use commercially reasonable efforts to ship a repaired or replacement part within fifteen (15)
working days after receipt of the RMA request. Actual delivery times may vary depending on Reseller’s or
purchaser’s location.
To Receive a Return Materials Authorization (RMA) Number
Please contact the party from whom you purchased the Product. If you purchased the Product directly
from Rajant, contact your Rajant Sales and Service Representative or email support@rajant.com.
DISCLAIMER OF WARRANTY
EXCEPT AS SPECIFIED IN THIS WARRANTY SECTION, ALL EXPRESS OR IMPLIED CONDITIONS,
REPRESENTATIONS, AND WARRANTIES INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OR
CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT,
SATISFACTORY QUALITY, NON-INTERFERENCE, ACCURACY OF INFORMATIONAL CONTENT, OR ARISING
FROM A COURSE OF DEALING, LAW, USAGE, OR TRADE PRACTICE, ARE HEREBY EXCLUDED TO THE
EXTENT ALLOWED BY APPLICABLE LAW AND ARE EXPRESSLY DISCLAIMED BY RAJANT, ITS SUPPLIERS
AND LICENSORS. TO THE EXTENT THAT ANY OF THE SAME CANNOT BE EXCLUDED, SUCH IMPLIED
CONDITION, REPRESENTATION AND/OR WARRANTY IS LIMITED IN DURATION TO THE EXPRESS
WARRANTY PERIOD REFERRED TO IN THE “LIMITED WARRANTY” SECTION ABOVE. BECAUSE SOME
STATES OR JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,
THE ABOVE LIMITATION MAY NOT APPLY IN SUCH STATES. THIS WARRANTY GIVES CUSTOMER SPECIFIC
LEGAL RIGHTS, AND CUSTOMER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION TO
JURISDICTION. This disclaimer and exclusion shall apply even if the express warranty set forth above fails
of its essential purpose.
Disclaimer of Liabilities—Limitation of Liability. IF YOU ACQUIRED THE SOFTWARE IN THE UNITED
STATES, LATIN AMERICA, CANADA, JAPAN OR THE CARIBBEAN, NOTWITHSTANDING ANYTHING ELSE IN
THE AGREEMENT TO THE CONTRARY, ALL LIABILITY OF RAJANT, ITS AFFILIATES, OFFICERS, DIRECTORS,
EMPLOYEES, AGENTS, SUPPLIERS AND LICENSORS COLLECTIVELY, TO CUSTOMER, WHETHER IN
CONTRACT, TORT (INCLUDING NEGLIGENCE), BREACH OF WARRANTY OR OTHERWISE, SHALL NOT
EXCEED THE PRICE PAID BY CUSTOMER TO ANY APPROVED SOURCE FOR THE SOFTWARE THAT GAVE
RISE TO THE CLAIM OR IF THE SOFTWARE IS PART OF ANOTHER PRODUCT, THE PRICE PAID FOR SUCH
OTHER PRODUCT. THIS LIMITATION OF LIABILITY FOR SOFTWARE IS CUMULATIVE AND NOT PER
INCIDENT (I.E. THE EXISTENCE OF TWO OR MORE CLAIMS WILL NOT ENLARGE THIS LIMIT).
IF YOU ACQUIRED THE SOFTWARE IN EUROPE, THE MIDDLE EAST, AFRICA, ASIA OR OCEANIA,
NOTWITHSTANDING ANYTHING ELSE IN THE AGREEMENT TO THE CONTRARY, ALL LIABILITY OF RAJANT,
ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, SUPPLIERS AND LICENSORS
COLLECTIVELY, TO CUSTOMER, WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), BREACH OF
WARRANTY OR OTHERWISE, SHALL NOT EXCEED THE PRICE PAID BY CUSTOMER TO RAJANT FOR THE
SOFTWARE THAT GAVE RISE TO THE CLAIM OR IF THE SOFTWARE IS PART OF ANOTHER PRODUCT, THE
PRICE PAID FOR SUCH OTHER PRODUCT. THIS LIMITATION OF LIABILITY FOR SOFTWARE IS CUMULATIVE
AND NOT PER INCIDENT (I.E. THE EXISTENCE OF TWO OR MORE CLAIMS WILL NOT ENLARGE THIS LIMIT).
NOTHING IN THE AGREEMENT SHALL LIMIT (I) THE LIABILITY OF RAJANT, ITS AFFILIATES, OFFICERS,
DIRECTORS, EMPLOYEES, AGENTS, SUPPLIERS AND LICENSORS TO CUSTOMER FOR PERSONAL INJURY
OR DEATH CAUSED BY THEIR NEGLIGENCE, (II) RAJANT’s LIABILITY FOR FRAUDULENT
MISREPRESENTATION, OR (III) ANY LIABILITY OF RAJANT WHICH CANNOT BE EXCLUDED UNDER
APPLICABLE LAW.
Disclaimer of Liabilities—Waiver of Consequential Damages and Other Losses. IF YOU ACQUIRED THE
SOFTWARE IN THE UNITED STATES, LATIN AMERICA, THE CARIBBEAN OR CANADA, REGARDLESS OF
WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE OR OTHERWISE, IN NO
EVENT WILL RAJANT OR ITS SUPPLIERS BE LIABLE FOR ANY LOST REVENUE, PROFIT, OR LOST OR
DAMAGED DATA, BUSINESS INTERRUPTION, LOSS OF CAPITAL, OR FOR SPECIAL, INDIRECT,
CONSEQUENTIAL, INCIDENTAL, OR PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE
THEORY OF LIABILITY OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE SOFTWARE OR
OTHERWISE AND EVEN IF RAJANT OR ITS SUPPLIERS OR LICENSORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES OR JURISDICTIONS DO NOT ALLOW
LIMITATION OR EXCLUSION OF CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY
NOT APPLY TO YOU.
IF YOU ACQUIRED THE SOFTWARE IN JAPAN, EXCEPT FOR LIABILITY ARISING OUT OF OR IN CONNECTION
WITH DEATH OR PERSONAL INJURY, FRAUDULENT MISREPRESENTATION, AND REGARDLESS OF
WHETHER ANY REMEDY SET FORTH HEREIN FAILS OF ITS ESSENTIAL PURPOSE OR OTHERWISE, IN NO
EVENT WILL RAJANT, ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, SUPPLIERS AND
LICENSORS BE LIABLE FOR ANY LOST REVENUE, PROFIT, OR LOST OR DAMAGED DATA, BUSINESS
INTERRUPTION, LOSS OF CAPITAL, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR
PUNITIVE DAMAGES HOWEVER CAUSED AND REGARDLESS OF THE THEORY OF LIABILITY OR WHETHER
ARISING OUT OF THE USE OF OR INABILITY TO USE SOFTWARE OR OTHERWISE AND EVEN IF RAJANT OR
ANY APPROVED SOURCE OR THEIR SUPPLIERS OR LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
IF YOU ACQUIRED THE SOFTWARE IN EUROPE, THE MIDDLE EAST, AFRICA, ASIA OR OCEANIA, IN NO
EVENT WILL RAJANT, ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, SUPPLIERS AND
LICENSORS, BE LIABLE FOR ANY LOST REVENUE, LOST PROFIT, OR LOST OR DAMAGED DATA, BUSINESS
INTERRUPTION, LOSS OF CAPITAL, OR FOR SPECIAL, INDIRECT, CONSEQUENTIAL, INCIDENTAL, OR
PUNITIVE DAMAGES, HOWSOEVER ARISING, INCLUDING, WITHOUT LIMITATION, IN CONTRACT, TORT
(INCLUDING NEGLIGENCE) OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE THE
SOFTWARE, EVEN IF, IN EACH CASE, RAJANT, ITS AFFILIATES, OFFICERS, DIRECTORS, EMPLOYEES,
AGENTS, SUPPLIERS AND LICENSORS, HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
BECAUSE SOME STATES OR JURISDICTIONS DO NOT ALLOW LIMITATION OR EXCLUSION OF
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT FULLY APPLY TO YOU. THE
FOREGOING EXCLUSION SHALL NOT APPLY TO ANY LIABILITY ARISING OUT OF OR IN CONNECTION WITH:
(I) DEATH OR PERSONAL INJURY, (II) FRAUDULENT MISREPRESENTATION, OR (III) RAJANT’s LIABILITY IN
CONNECTION WITH ANY TERMS THAT CANNOT BE EXCLUDED UNDER APPLICABLE LAW.
Customer acknowledges and agrees that RAJANT has set its prices and entered into the Agreement in
reliance upon the disclaimers of warranty and the limitations of liability set forth herein, that the same
reflect an allocation of risk between the parties (including the risk that a contract remedy may fail of its
essential purpose and cause consequential loss), and that the same form an essential basis of the
bargain between the parties.
Controlling Law, Jurisdiction. Customer agrees that all sales occurred, and contracts entered into at
Malvern, Pennsylvania, notwithstanding the location of any affiliate or Customer’s location or principal
place of business. All contracts for the license of software and/or purchase of hardware are deemed to
have occurred at Malvern, Pennsylvania and the Agreement and warranties (“Warranties”) are controlled
by and construed under the laws of the Commonwealth of Pennsylvania, United States of America,
notwithstanding any conflicts of law provisions; and the state and federal courts of Pennsylvania shall
have exclusive jurisdiction over any claim arising under the Agreement or Warranties.
The parties specifically disclaim the application of the UN Convention on Contracts for the International
Sale of Goods. Notwithstanding the foregoing, either party may seek interim injunctive relief in any court
of appropriate jurisdiction with respect to any alleged breach of such party’s intellectual property or
proprietary rights. If any portion hereof is found to be void or unenforceable, the remaining provisions of
the Agreement and Warranties shall remain in full force and effect. Except as expressly provided herein,
the Agreement constitutes the entire agreement between the parties with respect to the license of the
Software and Documentation and supersedes any conflicting or additional terms contained in any
Purchase Order or elsewhere, all of which terms are excluded. The Agreement has been written in the
English language, and the parties agree that the English version will govern.
Product warranty terms and other information applicable to RAJANT products are available at the
following URL: www.rajant.com
RAJANT and the RAJANT Logo are trademarks of RAJANT Corporation and/or its affiliates in the U.S. and
other countries. Third party trademarks mentioned are the property of their respective owners. The use
of the word partner does not imply a partnership relationship between RAJANT and any other company.
Appendix D: GNU General Public License
Version 2, June 1991
Copyright © 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 021111307 USA
Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is
not allowed.
PREAMBLE
The licenses for most software are designed to take away your freedom to share and change it. By
contrast, the GNU General Public License is intended to guarantee your freedom to share and change
free software–to make sure the software is free for all its users. This General Public License applies to
most of the Free Software Foundation’s software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by the GNU Library General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are
designed to make sure that you have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it if you want it, that you can change the
software or use pieces of it in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask
you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute
copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the
recipients all the rights that you have. You must make sure that they, too, receive or can get the source
code. And you must show them these terms so they know their rights.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which
gives you legal permission to copy, distribute and/or modify the software.
Also, for each author’s protection and ours, we want to make certain that everyone understands that
there is no warranty for this free software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so that any problems introduced by
others will not reflect on the original authors' reputations.
Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that
redistributors of a free program will individually obtain patent licenses, in effect making the program
proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone’s free
use or not licensed at all.
The precise terms and conditions for copying, distribution and modification follow.
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
1. This License applies to any program or other work which contains a notice placed by the copyright
holder saying it may be distributed under the terms of this General Public License. The “Program”,
below, refers to any such program or work, and a “work based on the Program” means either the
Program or any derivative work under copyright law: that is to say, a work containing the Program
or a portion of it, either verbatim or with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the term “modification”.) Each licensee is
addressed as “you”.
Activities other than copying, distribution and modification are not covered by this License; they are
outside its scope. The act of running the Program is not restricted, and the output from the Program is
covered only if its contents constitute a work based on the Program (independent of having been made
by running the Program). Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any
medium, provided that you conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and
to the absence of any warranty; and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer
warranty protection in exchange for a fee.
1. You may modify your copy or copies of the Program or any portion of it, thus forming a work based
on the Program, and copy and distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices stating that you changed the files and the
date of any change.
b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived
from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the
terms of this License.
c) If the modified program normally reads commands interactively when run, you must cause it, when
started running for such interactive use in the most ordinary way, to print or display an announcement
including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you
provide a warranty) and that users may redistribute the program under these conditions, and telling the
user how to view a copy of this License. (Exception: if the Program itself is interactive but does not
normally print such an announcement, your work based on the Program is not required to print an
announcement.)
These requirements apply to the modified work as a whole. If identifiable sections of that work are not
derived from the Program, and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those sections when you distribute them as
separate works. But when you distribute the same sections as part of a whole which is a work based on
the Program, the distribution of the whole must be on the terms of this License, whose permissions for
other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by
you; rather, the intent is to exercise the right to control the distribution of derivative or collective works
based on the Program.
In addition, mere aggregation of another work not based on the Program with the Program (or with a
work based on the Program) on a volume of a storage or distribution medium does not bring the other
work under the scope of this License.
1. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or
executable form under the terms of Sections 1 and 2 above provided that you also do one of the
following:
a) Accompany it with the complete corresponding machine-readable source code, which must be
distributed under the terms of Sections 1 and 2 above on a medium customarily used for software
interchange; or,
b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no
more than your cost of physically performing source distribution, a complete machine-readable copy of
the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer to distribute corresponding source
code. (This alternative is allowed only for noncommercial distribution and only if you received the
program in object code or executable form with such an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for making modifications to it. For an
executable work, complete source code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to control compilation and installation of the
executable. However, as a special exception, the source code distributed need not include anything that
is normally distributed (in either source or binary form) with the major components (compiler, kernel,
and so on) of the operating system on which the executable runs, unless that component itself
accompanies the executable.
If distribution of executable or object code is made by offering access to copy from a designated place,
then offering equivalent access to copy the source code from the same place counts as distribution of the
source code, even though third parties are not compelled to copy the source along with the object code.
1. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under
this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void,
and will automatically terminate your rights under this License. However, parties who have received
copies, or rights, from you under this License will not have their licenses terminated so long as such
parties remain in full compliance.
2. You are not required to accept this License, since you have not signed it. However, nothing else
grants you permission to modify or distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by modifying or distributing the
Program (or any work based on the Program), you indicate your acceptance of this License to do so,
and all its terms and conditions for copying, distributing or modifying the Program or works based
on it.
3. Each time you redistribute the Program (or any work based on the Program), the recipient
automatically receives a license from the original licensor to copy, distribute or modify the Program
subject to these terms and conditions. You may not impose any further restrictions on the
recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by
third parties to this License.
4. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason
(not limited to patent issues), conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not excuse you from the conditions
of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may not distribute the
Program at all. For example, if a patent license would not permit royalty-free redistribution of the
Program by all those who receive copies directly or indirectly through you, then the only way you
could satisfy both it and this License would be to refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under any particular circumstance, the
balance of the section is intended to apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any patents or other property right claims or
to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the
free software distribution system, which is implemented by public license practices. Many people have
made generous contributions to the wide range of software distributed through that system in reliance
on consistent application of that system; it is up to the author/donor to decide if he or she is willing to
distribute software through any other system and a licensee cannot impose that choice.
This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this
License.
1. If the distribution and/or use of the Program is restricted in certain countries either by patents or by
copyrighted interfaces, the original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding those countries, so that
distribution is permitted only in or among countries not thus excluded. In such case, this License
incorporates the limitation as if written in the body of this License.
2. The Free Software Foundation may publish revised and/or new versions of the General Public
License from time to time. Such new versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Program specifies a version number of this
License which applies to it and “any later version”, you have the option of following the terms and
conditions either of that version or of any later version published by the FreeSoftware Foundation. If the
Program does not specify a version number of this License, you may choose any version ever published
by the Free Software Foundation.
1. If you wish to incorporate parts of the Program into other free programs whose distribution
conditions are different, write to the author to ask for permission. For software which is copyrighted
by the Free Software Foundation, write to the Free Software Foundation; we sometimes make
exceptions for this. Our decision will be guided by the two goals of preserving the free status of all
derivatives of our free software and of promoting the sharing and reuse of software generally.
NO WARRANTY
1. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE
PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN
WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS”
WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD
THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR
OR CORRECTION.
2. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY
COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE
PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO
USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO
OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
HOW TO APPLY THESE TERMS TO YOUR NEW PROGRAMS
If you develop a new program, and you want it to be of the greatest possible use to the public, the best
way to achieve this is to make it free software which everyone can redistribute and change under these
terms.
To do so, attach the following notices to the program. It is safest to attach them to the start of each
source file to most effectively convey the exclusion of warranty; and each file should have at least the
“copyright” line and a pointer to where the full notice is found.
one line to give the program’s name and an idea of what it does. Copyright © yyyy name of author
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General
Public License as published by the Free Software Foundation; either version 2 of the License, or (at your
option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this when it starts in an interactive mode:
Gnomovision version 69, Copyright © year name of author Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type ‘show w’. This is free software, and you are welcome to redistribute it under
certain conditions; type ‘show c’ for details.
The hypothetical commands ‘show w’ and ‘show c’ should show the appropriate parts of the General
Public License. Of course, the commands you use may be called something other than ‘show w’ and
‘show c’; they could even be mouse-clicks or menu items–whatever suits your program.
You should also get your employer (if you work as a programmer) or your school, if any, to sign a
“copyright disclaimer” for the program, if necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program ‘Gnomovision’ (which makes
passes at compilers) written by James Hacker.
signature of Ty Coon, 1 April 1989 Ty Coon, President of Vice
This General Public License does not permit incorporating your program into proprietary programs. If
your program is a subroutine library, you may consider it more useful to permit linking proprietary
applications with the library. If this is what you want to do, use the GNU Lesser General Public License
instead of this License.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : jwarnell
Create Date                     : 2016:08:17 14:22:11-04:00
Modify Date                     : 2016:08:17 14:22:11-04:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : file:///C:/Users/jwarnell/Downloads/CX1_User_Guide.html
Creator                         : jwarnell
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:3f4ca253-8e17-401d-b225-b6c970e6522b
Instance ID                     : uuid:5ccf791a-5b13-4895-a706-6ed259223f8c
Page Count                      : 40
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VJA-CX1-3600

Navigation menu