Rajant DLM108RJT mini-PCI radio Module User Manual FCCID VJADLM108 User Guide 0112
Rajant Corporation mini-PCI radio Module FCCID VJADLM108 User Guide 0112
Rajant >
user guide
User Guide for OEM Integration Model : DLM108-RJT Brand : Doodle Labs DLM108-RJT is an Industrial grade 1000 mW Tx power mini-PCI radio module. It is designed for the ISM frequency band 902 MHz ~ 928 MHz. It sports advanced filtering and noise reduction design techniques for high interference immunity from the neighboring Pager transmitters. Applications Long Range Outdoor Broad band wireless applications Back hauls Access points & High Performance CPEs Mesh Wireless Infra structure applications Industrial applications 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5 RADIO SYSTEM INFORMATION Model No* DLM108-RJT MAC and Baseband Atheros AR5414A Interface 32bits, 33MHz miniPCI Type III A Operation Voltage 3.3V Radio Frequency Band 902 MHz - 928 MHz Data Rates 54, 48, 36, 24, 18, 12, 9, 6 Mbps (Auto fall back) Channel Bandwidth 5, 10, or 20 MHz Available Drivers Open Source MADWiFi for Linux, Windows 2000, XP and Vista Tx/Rx Specification Data Rate Modulation Tx Power* (± 1 dBm) Rx Sensitivity (± 2 dBm) 5 MHz Channel BW (QUARTER RATE) 907 MHz, 912 MHz, 917 MHz & 922 MHz 1.5 Mbps BPSK/COFDM 30 dBm -97 dBm 2.25 Mbps BPSK/COFDM 30 dBm -97 dBm 3 Mbps QPSK/COFDM 30 dBm -95 dBm 4.5 Mbps QPSK/COFDM 30 dBm -93dBm 6 Mbps 16QAM/COFDM 30 dBm -90 dBm 9 Mbps 16QAM/COFDM 29 dBm -86 dBm 12 Mbps 64QAM/COFDM 28 dBm -81 dBm 13.5 Mbps 64QAM/COFDM 27 dBm -78 dBm Data Rate Modulation Tx Power* (± 1 dBm) Rx Sensitivity (± 2 dBm) 3 Mbps BPSK/COFDM 30 dBm -95 dBm 4.5 Mbps BPSK/COFDM 30 dBm -95 dBm 6 Mbps QPSK/COFDM 30 dBm -93 dBm 9 Mbps QPSK/COFDM 30 dBm -91 dBm 12 Mbps 16QAM/COFDM 30 dBm -88 dBm 18 Mbps 16QAM/COFDM 29 dBm -84 dBm 24 Mbps 64QAM/COFDM 28 dBm -79 dBm 27 Mbps 64QAM/COFDM 27 dBm -76 dBm Tx/Rx Specification 10 MHz Channel BW (HALF RATE) 907 MHz, 912 MHz, 917 MHz & 922 MHz 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5 Tx/Rx Specification 20 MHz Channel BW (FULL RATE) 912 MHz & 917 MHz Data Rate Modulation Tx Power* (± 1 dBm) Rx Sensitivity (± 2 dBm) 1 Mbps DBPSK/DSS 30 dBm -97 dBm 2 Mbps DQPSK/DSS 30 dBm -95 dBm 5.5 Mbps CCK/DSS 30 dBm -92 dBm 11 Mbps CCK/DSS 30 dBm -90 dBm 6 Mbps BPSK/COFDM 30 dBm -93 dBm 9 Mbps BPSK/COFDM 30 dBm -93 dBm 12 Mbps QPSK/COFDM 30 dBm -91 dBm 18 Mbps QPSK/COFDM 30 dBm -89 dBm 24 Mbps 16QAM/COFDM 30 dBm -86 dBm 36 Mbps 16QAM/COFDM 29 dBm -82 dBm 48 Mbps 64QAM/COFDM 28 dBm -77 dBm 54 Mbps 64QAM/COFDM 27 dBm -74 dBm PHYSICAL, ENVIRONMENTAL AND OTHER SPECIFICATIONS Antenna Ports* Two MMCX Ports Power Consumption Matrix (@3.3V) DBPSK/DSS BPSK/COFDM QPSK/COFDM 16QAM/COFDM 64QAM/COFDM Max. Throughput test condition 1.5A (5W) Operating Temperature* -40°F to +185°F (-40°C to +85°C) Dimension 2.36" x 2.63" (60 x 67 mm), approx. 0.04 lb (0.02 kg) 1.5A (5W) 1.5A (5W) 1.5A (5W) 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5 1.3A (4.3W) Interference Signal Desensitization Measurements DLM108-RJT Operating Freq = 917 MHz, 20 MHz Channel, BPSK/COFDM Modulation Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5 o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device is intended only for OEM integrators under the following conditions: 1. The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2. The transmitter module may not be co-located with any other transmitter or antenna, IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining separate FCC authorization. IC Interference Statement This device complies with RSS-210 of the IC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. IC: 7832A-DLM108RJT 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5 End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: “Contains FCC ID:VJADLM108RJT& IC: 7832A-DLM108RJT”. 7 4 5 To a P a y o h Lo r on g 5 , T h e A c tu a r y , S u i te 0 4 - 0 1 , S i n ga p o r e 3 1 9 4 5 5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.0.0 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2011:02:11 13:44:01+08:00 Create Date : 2011:02:11 13:44:01+08:00 Format : application/pdf Title : Microsoft Word - FCCID VJADLM108 User Guide_0112 Creator : USER Document ID : uuid:570b81e9-a8c6-4ce0-82a4-39f9c94f2ae4 Instance ID : uuid:ca59c950-d987-4d88-86e4-9e59cc0f811f Page Count : 6 Author : USEREXIF Metadata provided by EXIF.tools