Rapoo Technology 03036 2.4GHz Nano Receiver User Manual MANUAL 03036
Shenzhen Rapoo Technology Co., Ltd 2.4GHz Nano Receiver MANUAL 03036
User Manual
Receiver Picture
Installation
1. Plug the Nano receiver into a USB port of your computer.
2. Move the mouse to get connected with the receiver.
Trouble Shooting
1. Check Nano receiver connection; try to inserting Nano
Receiver to another USB port on your computer.
2. No Connection between the mouse and the Nano
Receiver.
Re-insert the Nano
Receiver. Take out the battery from the
mouse and reinstall it.
Quick Start Guide
Of
2.4GHz Micro receiver
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on. The user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with Part 15 of the FCC Rules.Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.