Rapoo Technology 03041A 5.8G Nano Receiver User Manual 3000P AAP 2011 08 12

Shenzhen Rapoo Technology Co., Ltd 5.8G Nano Receiver 3000P AAP 2011 08 12

Contents

user manual 1

size:W290mm X H260mm 70g书纸 先风琴再对折ON OFF USB12Wireless Optical Mouse 雷柏無線光學滑鼠Quick Start Guide (V1.0) M/N： Rating: Approval No: CMIIT ID: M/N： Rating: Approval No: CMIIT ID: 备注：请将各条填写清楚，请勿擅自涂改，并妥善保管好本保修服务卡，以维护您的合法权益。如需服务或有任何疑问， 请咨询当地经销商或与我们联系。产品中有毒有害物质或元素的名称及含量根据中国《电子信息产品污染控制管理办法》铅(Pb)汞(Hg)镉(Cd)六价铬(Cr（VI ））多溴联苯(PBB)多溴二苯醚(PBDE)电缆Cable电路板组件PWAs塑料部件Plastic parts金属部件Metal parts橡胶部件Rubber parts鼠标○○○ ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○=表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006标准规定的限量要求以下。注：环保使用期限的参考标取决于产品正常工作的温度和湿度等条件。部件名称有毒有害物质或元素产品中有毒有害物质或元素的名称及含量根据中国《电子信息产品污染控制管理办法》电路板组件PWAsPlastic 塑料外壳enclosure塑料部件Plastic parts金属部件Metal parts铅(Pb)汞(Hg)镉(Cd)六价铬(Cr（VI ））多溴联苯(PBB)多溴二苯醚(PBDE)电缆Cable接收器○○○ ○○○○○○○○○○○○○○○○○○○○ ○○○○○○○○=表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T 11363-2006标准规定的限量要求以下。注：环保使用期限的参考标取决于产品正常工作的温度和湿度等条件。部件名称有毒有害物质或元素Company nameAddressTel#AV FUTURE LINK SDN BHDNO.23A,JALAN 5/152,TAMAN PERINDUSTRIAN OUG,PUCHONG,58200 KUALA LUMPUR ,MALAYSIA(+0060)377830011Hongkong臺灣中国大陆Việt NamMalaysiaVim Yield Company 香港九龍官塘成業街20 號怡生工業大廈2字樓全層852-31522789 DescriptionInformationCountry (or area)Company nameAddressTel#Tên công tyđịa chỉđiện thoại公司名称 地址电话CÔNG TY CỔ PHẦN KỸ THUẬT CÔNG NGHỆ NAM THÀNHSố 7, lô 14A, khu đô thị mới Trung Yên, đường Trung Hòa, quậnCầu Giấy, Hà Nội, Việt Nam0084-4-37834530 　 連鈺電子有限公司新北市汐止區新台五路一段79 號13 樓(+886) 2 2698 1965深圳雷柏电子有限公司深圳市福田中心区益田路4068号卓越时代广场41层(+86)755-23995550公司名稱地址電話RAPOO 雷柏RAPOO 雷柏Power on03041A5.8G Nano ReceiverPressPullOpenInsert the batteryCloseNCC 警告語根據交通部低功率管理辦法規定：第十二條經形式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，并改善至無干擾時方的繼續使用。前項合法通信，指依電信規定作業之無線電信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。FCC StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).This equipment complies with Part 15 of FCC RF Rules. Operation is subject to the following two conditions:1) This device may not cause interference and2) This device must accept any interference, including interference that may cause undesired operation of the device.Caution! The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Declaration of ConformityHereby, ShenZhen Rapoo Technology Co., Ltd, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.Canada Statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.Take out Receiver5.8G Nano Receiver user guide1. Plug the Nano Receiver into a USB port of your computer.2. Turn on the Wireless Optical Mouse.3. Move the Wireless Optical Mouse to get connected with the Nano Receiver.

Navigation menu