Raspberry Pi RPI0W Single Board Computer User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3296348
Application ID	pDvP2sZyukfP05cKDBeJkQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	32.57kB (407131 bits)
Date Submitted	2017-02-27 00:00:00
Date Available	2017-02-28 00:00:00
Creation Date	2016-11-18 15:19:19
Producing Software	Microsoft® Word 2013
Document Lastmod	2016-11-18 15:19:19
Document Title	User Manual
Document Creator	Microsoft® Word 2013
Document Author:	Microsoft account

Raspberry Pi
Regulatory Compliance and Safety
Information
Product Name: Raspberry Pi Zero W
IMPORTANT
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Warnings
This product shall only be connected to an external power supply rated at 5V dc, and a minimum current of 2A. Any external
power supply used with the Raspberry-Pi shall comply with relevant regulations and standards applicable in the country of
intended use.
This product should not be overclocked as this may make certain components very hot.
This product should be operated in a well ventilated environment and should not be covered.
This product should be placed on a stable, flat, non-conductive surface in use and should not be contacted by conductive
items.
Instructions for safe use
To avoid malfunction or damage to your Raspberry Pi please observe the follow ing:
Do not expose it to w ater, moisture or place on a conductive surface w hilst in operation.
Do not expose it to heat from any source; the Raspberry Pi is designed for reliable operation at normal ambient room
temperatures.
Take care w hilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
Avoid handling t he Raspberry Pi w hile it is pow ered. Only handle by the edges to minimize the risk of electrostatic
discharge damage.
All peripherals used w ith the Raspberry Pi should comply w ith relevant standards for the country of use and be marked
accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice used in conjunction w ith the Raspberry Pi.
Compliance Information
The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union.
WEEE Directive Statement for the European Union
In common with all Electronic and Electrical products the Raspberry Pi should not be disposed of in household waste.
Alternative arrangements may apply in other jurisdictions.
EMC Compliance Statements
European Union (EU) Electromagnetic Compatibility Directive Compliance
Statement
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the
laws of the Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to the European Standard EN 55022.
Warning: This is an EN 55022 Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Hereby, Raspberry Pi, declares that this single board computer is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/EC. A full copy of the Declaration of Conformity can be found at
www.raspberrypi.org/pi3/doc.pdf
Federal Communications Commission (FCC) Emissions Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with the FCC radiation exposure limits for an uncontrolled environment.
This equipment shall be installed and operated with a minimum distance of 20cm between the user and this device.
This transmitter must not be co-located or operated with any other antenna or transmitter
Industry Canada Class B Emissions Compliance Statement
This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts
de licence. L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage,
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
This equipment complies with IC RSS‐102 radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator and all persons.
Cet appareil est conforme aux limitations de la norme IC RSS‐102 concernant l’exposition aux radiations dans un
environnement non contrôlé. Cet équipement doit être installé et utilisé en respectant une distance minimale de 20cm entre le
radiateur et toutes les personnes.
www.raspberrypi.org

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-GB
Tagged PDF                      : Yes
Author                          : Microsoft account
Creator                         : Microsoft® Word 2013
Create Date                     : 2016:11:18 15:19:19+00:00
Modify Date                     : 2016:11:18 15:19:19+00:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools