Raspberry Pi RPI32 Raspberry Pi 3 Model B - Single Board Computer User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	2912433
Application ID	Ti/YleaJNSl+TR5mL5C0WQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	8.1kB (101229 bits)
Date Submitted	2016-02-26 00:00:00
Date Available	2016-02-26 00:00:00
Creation Date	2016-01-11 10:38:52
Producing Software	RAD PDF 2.32.9.4 - http://www.radpdf.com
Document Lastmod	2016-02-22 02:44:49
Document Title	Users manual
Document Creator	RAD PDF
Document Author:	Microsoft account

Raspberry Pi
Regulatory Compliance and Safety
Information
Product Name: Raspberry Pi 3, Model B Uncased Version
IMPORTANT
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE
Warnings
This product shall only be connected to an external power supply rated at 5V dc, and a maximum current of 1500 – 2000 mA.
Any external power supply used with the Raspberry-Pi shall comply with relevant regulations and standards applicable in the
country of intended use.
This product should not be overclocked as this may make certain components very hot.
This product should be operated in a well ventilated environment and should not be covered.
This product should be placed on a stable, flat, non-conductive surface in use and should not be contacted by conductive
items.
This product should not be used within 20cm of the body with the Wi-Fi/Bluetooth switched on.
Instructions for safe use
To avoid malfunction or damage to your Raspberry Pi please observe the following:
Do not expose it to water, moisture or place on a conductive surface whilst in operation.
Do not expose it to heat from any source; the Raspberry Pi is designed for reliable operation at normal ambient room
temperatures.
Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors.
Avoid handling the Raspberry Pi while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge
damage.
All peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked
accordingly to ensure that safety and performance requirements are met.
These articles include but are not limited to keyboards, monitors and mice used in conjunction with the Raspberry Pi.
Compliance Information
The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union.
WEEE Directive Statement for the European Union
In common with all Electronic and Electrical products the Raspberry Pi should not be disposed of in household waste.
Alternative arrangements may apply in other jurisdictions.
CMIIT ID: XXXXXXXXXX
EMC Compliance Statements
European Union (EU) Electromagnetic Compatibility Directive Compliance
Statement
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the
laws of the Member States relating to electromagnetic compatibility.
This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to the European Standard EN 55022.
Warning: This is an EN 55022 Class B product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
Federal Communications Commission (FCC) Emissions Compliance Statement
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to Part
15 ofdevice
the FCC
Rules.with
These
limits
are
designed
to provide
reasonable
protection
againsttwo
harmful
interference when the
This
device
complies
with
Part
15 of
of
the
FCC Rules.
Rules.
Operation
subject
thefollowing
following
two
conditions:
This
complies
Part
15
the
FCC
Operation
isissubject
totothe
conditions:
equipment
is operated
a commercial
environment.and
(1)
This device
device
may not
notin
cause
harmful interference,
interference,
and
(1)
This
may
cause
harmful
This
device
complies
with Part
15
of 15
theofFCC
Rules.
Operation
is
subject to the
twoundesired
conditions:
(1) this device might
· This
This
device
complies
with
Part
thereceived,
FCC
Rules.
(2)
This
device
must
accept
any
interference
received,
including
interference
thatfollowing
may cause
cause
undesired
operation.
(2)
device
must
accept
any
interference
including
interference
that
may
operation.
This
equipment
complies
with
FCC
radiation exposure
limits
set forth
for an uncontrolled
environment.
End
users must follow the specific
not
cause
harmful instructions
interference,forand
(2) this RF
device
must accept
any interference
received,
including
interference
that might
specific
operating
satisfying
exposure
compliance.
This
transmitter
must
not
be
co-located
or operating
in the with any
This
equipment
complies
with FCC RF
radiation
exposure
limits set
forth
for an uncontrolled
environment.
End
users
must
follow
operating
instructions
for
satisfying
exposure
compliance.
This
transmitter
must
not
be
co-located
or
operating
in conjunction
cause
undesired
operation.
Operation
is subject
to the following two
conjunction
specific
operating
with
any
instructions
other antenna
for satisfying
or transmitter.
RF exposure compliance. This transmitter must not be co-located or operating in conjunction
other
antenna
or
transmitter.
Warning:
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the
conditions:
Changes
or modifications
expressly approved by the party responsible for compliance could void the user's authority to operate
with
any other
antenna or not
transmitter.
user
willdevice
be required
tocause
correct
the interference
(1) equipment
This
may not
harmful
interference,at their own expense.
the
Changes
or
modifications
not
expressly
Changes
or
modifications
not
expresslyapproved
approvedby
bythe
theparty
partyresponsible
responsiblefor
forcompliance
compliancecould
couldvoid
voidthe
theuser's
user'sauthority
authorityto
tooperate
operate
Changes
or modifications not expressly
approved
by
the
party
responsible
for
compliance
could
void
the
user's
authority
to
operate
and
the
theequipment
equipment
the
(2) equipment
This device must accept any interference
received, including interference that may cause undesired operation.
Industry
Canada
Class
BB
Emissions
Compliance
Statment
Industry
Canada
Class
B Emissions
Compliance
Statement
Industry
Canada
Class
Emissions
Compliance
Statment
This Class
Class B
B digital
digital apparatus
apparatus complies
complieswith
withCanadian
CanadianICES-003.
ICES-003.
This
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or
lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary
for successful communication.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type
et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de
brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la
puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication
satisfaisante.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le
fonctionnement.
Australia and New Zealand Class B Emissions Compliance Statement
Warning: This is a Class B product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
www.raspberrypi.org

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Language                        : en-GB
Tagged PDF                      : Yes
XMP Toolkit                     : DynaPDF 3.0.49.146, http://www.dynaforms.com
Producer                        : RAD PDF 2.32.9.4 - http://www.radpdf.com
Create Date                     : 2016:01:11 10:38:52Z
Creator Tool                    : RAD PDF
Metadata Date                   : 2016:02:22 02:44:49-08:00
Modify Date                     : 2016:02:22 02:44:49-08:00
Creator                         : Microsoft account
Document ID                     : uuid:6cca96d5-b7da-3ebb-a44d-0f74d4da364e
Version ID                      : 1
Rendition Class                 : default
Author                          : Microsoft account
Rad Pdf Custom Data             : pdfescape.com-open-0B0FDD454116EFC77E6ACE03C194DC12B26E1B2D52013CB5

EXIF Metadata provided by EXIF.tools