Ratoc Systems Cb31U Users Manual User's
Ultra SCSI (FAST-20) Card Bus PC Card REX-CB31 cb31uRev.4.0
CB31U to the manual 55f24371-2ee5-44eb-b618-d222164654c9
2015-02-06
: Ratoc-Systems Ratoc-Systems-Cb31U-Users-Manual-502356 ratoc-systems-cb31u-users-manual-502356 ratoc-systems pdf
Open the PDF directly: View PDF
Page Count: 104 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Ultra SCSI (FAST-20) CardBus PC Card
- Index
- 1. Introduction
- 2. Setup
- 3. Using SCSI devices
- 4. SCSI Format Utility
- 5. Installing Windows 95/98
- 6. Installing Windows 2000
- 7. Linux
- 8. Troubleshooting
- 8-1. Deleting the CB31U driver completely
- 8-2. Updating the CB31U driver for Windows95/98/Me
- 8-3. If your laptop is made by TOSHIBA
- 8-4. If you use FUJITSU MO(M2512A, M2513A)
- 8-5. ? PCMCIA Card Services appears
- 8-6. The CB31U is registered as PCI Bridge
- 8-7. The CB31U is registered as PCI SCSI BUS Controller
- 8-8.When I try to capture image,I get an error on Windows 98
- 8-9. Unknown Device Window appears
- 8-10. When you can not finish Windows 95/98
- 8-11. Slow access to Ultra SCSI hard disk
- 8-12. When I can not detect a SCSI Scanner on Windows 2000/Xp
- 8-13. When you can not assign a drive letter
- 9. Registration and Tech-Support
- 10. Options
- 11. Specifications
- Appendix