Raven E1007830 Adjustable Bed Remote Control Transmitter User Manual manual
Raven Industries Adjustable Bed Remote Control Transmitter manual
Raven >
manual
OWNERS MANUAL
www.adjustablesbyleggett.com 99301XXX EDR11XXX 4/09
CONTENTS
Advisory ................................................................................................................................ 4
Acoustics .............................................................................................................................. 6
Installation ............................................................................................................................. 7
Prodigy™ Hand Control Function ...................................................................................... 12
Troubleshooting ................................................................................................................. 13
Accessories..........................................................................................................................14
1-2-Lifetime Warranty ......................................................................................................... 15
Copyright © 2009 Leggett & Platt, Inc.
Prodigy™ Owners Manual 99301XXX
4
ADVISORY
IMPORTANT INFORMATION
READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
This Prodigy™ adjustable bed has been quality engineered with design features to assure
comfort and safety when operated properly.
ELECTRICAL GROUNDING
This product is equipped with a polarized or
grounded electrical power cord. The power
cord will only fit into a grounded, electrical
surge protection device (not included) or a
grounded electrical outlet.
FOR OPTIMUM ADJUSTABLE BED
OPERATION, USE A GROUNDED,
ELECTRICAL SURGE PROTECTION DEVICE
(NOT INCLUDED). FAILURE TO USE A
SURGE PROTECTION DEVICE COULD
COMPROMISE SAFETY OR CAUSE
PRODUCT MALFUNCTION.
WARRANTY WARNING
Do not open any control boxes, motors or
hand control devices (with the exception
of the hand control and power down
box battery compartments). The product
warranty will be void if these components
are tampered with. Do not attempt to alter
component wiring or adjust or modify
the structure of the product in any way or
the warranty will be void. Any repair or
replacement of adjustable bed parts must be
performed by authorized personnel.
LUBRICATION
This product is designed to be maintenance
free. The lift motors are permanently
lubricated and sealed—no additional
lubrication is required. Do not apply lubricant
to lift motor lead screws or any nylon nuts or
the bed may inadvertently creep downward
from the elevated position.
PRODUCT RATINGS
The bed lift motors are not designed for
continuous use. Reliable operation and full
life expectancy will be realized as long as
the lift motors do not operate any more than
five (5) minutes over a thirty (30) minute
period, or approximately 15% duty cycle.
Note: massage equipped beds are not
designed for continuous, extended massage
operation. Massage systems are rated for
a maximum of 2 hours of use within any 6
hour period. Any attempt to circumvent or
exceed product ratings will shorten the life
expectancy of the product and may void the
warranty.
The recommended weight restrictions for
Prodigy™ adjustable beds are as follows:AC
equipped - 600 lb (272 kg) all sizes; DC
equipped - 450 lb (204 kg) all sizes. The bed
will structurally support the recommended
weights distributed evenly across the
head and foot sections. This product is not
designed to support or lift this amount in the
head or foot sections alone. Note: exceeding
the recommended weight restrictions could
damage the adjustable bed and void the
warranty.
For best performance, consumers should
enter and exit the adjustable bed with the
bed in the flat (horizontal) position. DO NOT
SIT ON THE HEAD OR FOOT SECTIONS WHILE
IN THE RAISED POSITION.
UL (Underwriters Laboratories) listed
components.
CFR 1633 approved for use with most
mattresses.
Made in USA.
Prodigy™ Owners Manual 99301XXX
5
ADVISORY
IMPORTANT INFORMATION
READ THE FOLLOWING INFORMATION CAREFULLY BEFORE USING THIS PRODUCT
This Prodigy™ adjustable bed has been quality engineered with design features to assure
comfort and safety when operated properly.
FCC COMPLIANCE
Electrical components are rated for 110/120
voltage, 60Hz, 3.9 amp. Components
meet Class B digital device rating (Part 15,
FCC rules) for residential use. Prodigy™
adjustable beds generate, use and may
radiate radio frequency energy. Radio
communication may be affected if not
installed and operated as recommended
in this manual. Changes or modifications
not expressively approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
Radio frequency = 2.4GHz.
LOCKING CASTER SAFETY FEATURE
Prodigy™ adjustable beds are equipped
with locking casters to prohibit the bed from
movement. For best results, place rubber
caster cups under locking casters when the
bed is located on smooth or hard surface
flooring—it is possible for locking caster
equipped beds to slide without the use of
rubber caster cups.
To activate locking casters, push down
on the lock tab. To disengage the locking
mechanism, push up on the lock tab (see
illustration below).
LOCKING CASTER
DETAIL
LOCK
SMALL CHILDREN / PETS WARNING
After the bed is unboxed, immediately
dispose of packaging material as it can
smother small children and pets. To avoid
injury, children or pets should not be allowed
to play under or on the bed. Children
should not operate this bed without adult
supervision.
HOSPITAL USE DISCLAIMER
This bed is designed for in-home use only.
It is not approved for hospital use and does
not comply with hospital standards. Do not
use this bed with tent type oxygen therapy
equipment, or use near explosive gases.
PACEMAKER WARNING
This product produces a vibrating sensation.
It is possible that individuals with heart-assist
pacemakers may experience a sensation
similar to exercise. Consult physician for
complete information.
SERVICE REQUIREMENTS
Service technicians are not responsible for
moving furniture, removing headboards
and footboards or any items required to
perform maintenance on the adjustable
bed. In the event the technician is unable to
perform service due to lack of accessibility,
the service call will be billed to the purchaser
and the service will have to be rescheduled.
Prodigy™ Owners Manual 99301XXX
6
ACOUSTICS
LIFTING/LOWERING MECHANISMS
The lift/lower feature will emit a minimal
humming sound during operation. This is
normal.
During operation, the lift arm wheels make
contact with the platform support of the bed.
This applies slight tension on the moving
components and resonance is reduced
to a minimum level. If excessive noise
or vibration is experienced, reverse the
movement action (up or down) of the bed
with the hand control. This should realign the
bed’s activating mechanisms to the proper
operational position.
MASSAGE OPERATION
The massage feature will emit a minimal tone
during operation. This is normal. When the
massage level is increased, motor resonance
will intensify accordingly.
LOCATION ENVIRONMENT
The level of sound experienced during
operation is directly related to the location
environment. For example, when a bed
is located on a hardwood floor with the
massage feature in operation, a vibrating
tone will be audible. To minimize this
resonance, place a piece of carpet—or
optional rubber caster cups—under each leg
or caster of the bed. See the Accessories
section of this manual for rubber caster cup
order information.
It is possible to experience vibration or noise
from the headboard brackets, headboards or
footboards if mounting bolts are not firmly
tightened.
Prodigy™ Owners Manual 99301XXX
7
*4 inch and 7 inch legs may be used separately or in
combination with casters to raise bed base to varying
heights off the floor:
• 4 inch leg only = 4 inch bed height
• 4 inch leg w/caster = 6-1/2 inch bed height
• 7 inch leg only = 7 inch bed height
• 7 inch leg w/caster = 9-1/2 inch bed height
For installation and setup, complete the numbered procedure indicated below and on
the following pages:
INSTALLATION
LOCKING
LEG CASTER
(4 PIECES)
HEADBOARD BRACKET ASSEMBLIES
Queen size shown—twin size (or smaller)
headboard brackets are not equipped with
angle brace. (4 pieces, 2 assemblies)
HEADBOARD BRACKET
HARDWARE KIT
(hardware: 16 pieces)
4” LEG
(4 PIECES)
7” LEG
(4 PIECES)
FOOT
MATTRESS
RETAINER
(1 per base)
SIDE MATTRESS
RETAINER
(2 per base)
HAND CONTROL
ANGLE BRACE
1. Before discarding any packing materials,
check the adjustable bed shipping carton
and verify the following items are
included:
• (1) Foot Mattress Retainer (per base)
• (2) Side Mattress Retainers (per base)
• (4) 4 inch Bed Legs*
• (4) 7 inch Bed Legs*
• (4) Locking Leg Casters
• (2) Headboard Bracket Assemblies
• (1) Headboard Bracket Hardware Kit
• (1) Hand Control
• (1) Owners Manual
• (1) Registration Card
Prodigy™ Owners Manual 99301XXX
8
GROMMETED
HOLES
INSTALLATION
2. Carefully lift the bed base frame from the
shipping carton, keeping the unit top-
side-down.
3. Install (4) legs into the base frame. Simply
screw each leg into a tapped hole at each
corner of the base frame (FIGURE 1).
Insert casters into the bottom of each bed
leg.
CASTERS – PRESS-FIT
INTO BOTTOM OF LEGS
LEGS – SCREW INTO
TAPPED HOLE AT
EACH CORNER
FIGURE 1: Leg and caster installation.
4. Remove and extend out power cord from
the protective packaging.
POWER CORDS MUST NOT INTERFERE
WITH ANY ADJUSTABLE BED
MECHANISMS.
5. Remove the plastic packaging from the
bed base frame. Carefully rotate the base
frame over to position the bed top-side-
up.
6. Plug power cord into a working,
grounded electrical outlet. Note: an
electrical surge protection device is
recommended (not included).
7. Install batteries in hand control (4-AAA
size, included). Briefly activate all
functions of the bed with the hand
control to verify all features are in
working order. If bed does not operate,
refer to the Troubleshooting section of
this manual.
8. Return bed to the level position.
Mattress Retainer
9. Install standard mattress retainer at the
foot end of the bed base as follows:
a. Locate grommeted holes at foot and
sides of bed base (FIGURE 2).
FIGURE 2: Grommeted hole locations.
FOOT END OF BED BASE
Prodigy™ Owners Manual 99301XXX
9
INSTALLATION
FIGURE 3: Foot mattress retainer installation. Side retainer
installs in same manner.
FIGURE 4: Mattress retainers installed.
Note: if adjustable bed is to be set up
without a headboard, basic installation
is now complete. If headboard is to be
installed, proceed to Headboard Bracket
Installation.
FAILURE TO FOLLOW HEADBOARD
BRACKET INSTALLATION INSTRUCTIONS
MAY CAUSE HEADBOARD BRACKET
INTERFERENCE WITH BASE FOAM DURING
ADJUSTABLE BED OPERATION. BASE FOAM
OR BASE COVER DAMAGE COULD RESULT.
NOTE
3 inches MAX.
FIGURE 5: headboard cross member location must not
exceed 3 inches (76.2mm) from the top of the mattress.
10. Install headboard brackets to the bed
base frame. When attaching (2) twin size
units to a king size headboard an optional
swing hinge kit (see accessory section)
may be used to connect the twin units.
Note: it is important to position the
bottom of the headboard cross member
a maximum distance of 3 inches
(76.2mm) between the headboard and
the top of the mattress (FIGURE 5). Do
not exceed 3 inches (76.2mm).
b. Place mattress retainer ends into
grommeted holes in top surface of
adjustable bed base (FIGURES 3
and 4). Note: king size will use only
(2) side retainers around outside
perimeter.
FOOT
MATTRESS
RETAINER
FOOT END OF BED BASE
Prodigy™ Owners Manual 99301XXX
10
INSTALLATION
11. Install headboard brackets to the
bed base frame per the following
instructions:
a. Raise the head section of the bed
(with hand control) to gain access to
the bed base frame.
b. Slide one headboard bracket channel
onto one side of the bed base frame.
Using (2) carriage bolts/nuts (FIGURE
6) attach channel to base frame
(FIGURE 7). Hand tighten bolts/
nuts (loosely) to allow adjustment
of the headboard bracket channels.
Repeat procedure to install the other
headboard bracket channel to the
other side.
HEADBOARD BRACKET
HARDWARE KIT CONTAINS:
(4) 3 INCH CARRIAGE BOLTS - A
(4) 1 INCH HEX HEAD BOLTS - B
(8) NUTS - C
AC
B
FIGURE 6: Headboard bracket hardware.
FIGURE 7: Headboard bracket channel installation (one each
side of the head section of the bed).
FIGURE 8: Headboard bracket flange installation (attach one
flange to each of the headboard bracket channels).
QUEEN SIZE HEADBOARD BRACKET
ASSEMBLIES ARE SHOWN. TWIN SIZE
HEADBOARD BRACKETS (OR SMALLER)
ARE NOT EQUIPPED WITH ANGLE BRACE
(FIGURES 7 AND 8).
NOTE
USE (2) 3 INCH CARRIAGE BOLTS AND
NUTS TO ATTACH EACH BRACKET
CHANNEL TO BED BASE FRAME
EXTENSION
ANGLE
BRACE
ANGLE
BRACE
SLIDE HEADBOARD
BRACKET CHANNEL
OVER THE BED BASE
FRAME EXTENSION
c. Attach one headboard bracket flange
to one of the bracket channels with
(2) hex head bolts/nuts (FIGURE 8).
Tighten bolts. Repeat procedure to
attach the other headboard bracket
flange.
USE (2) 1 INCH HEX HEAD
BOLTS AND NUTS (TIGHTEN)
TO ATTACH HEADBOARD
BRACKET FLANGE TO EACH
BRACKET CHANNEL
Prodigy™ Owners Manual 99301XXX
11
d. Slide headboard bracket assemblies
(in or out) to achieve a distance of
1.5 inches (38.1mm) to 2 inches
(50.8mm) between the edge of the
bed base and headboard bracket
flange assemblies (FIGURE 9).
e. Firmly tighten the 3 inch carriage
bolts of both headboard bracket
channels.
f. Measure the distance (center-to-
center) between the mounting holes
in the headboard.
g. Measure the center-to-center
distance between the mounting slots
of the headboard bracket flanges
(FIGURE 10).
h. If bracket flange adjustment is
required to accept the headboard,
remove the
1 inch
headboard
bracket flange
bolts and move
flanges
side-to-side
for the
adjustment
(FIGURE 10).
Reinstall bolts
and tighten.
i. Install
headboard.
12. Install mattress on
the adjustable bed
base.
Typical Prodigy™
adjustable bed
installation is now
complete.
1.5 TO 2 INCHES
SLIDE BRACKET
ASSEMBLIES IN OR
OUT TO ACHIEVE
POSITION
FIGURE 9: Headboard bracket position from the edge of the
bed base frame.
INSTALLATION
REMOVE 1 INCH BOLTS AND RELOCATE FLANGES TO
ACHIEVE CENTER-TO-CENTER DISTANCE REQUIRED
FOR HEADBOARD MOUNTING HOLES
MEASURE FLANGE SLOTS
CENTER-TO-CENTER TO
CHECK HEADBOARD HOLE
LOCATION
FIGURE 10: Headboard bracket measurement and adjustment to accept headboard.
Prodigy™ Owners Manual 99301XXX
12
FOOT UP/DOWN BUTTON
Press and hold to raise or lower the
foot section.
ALARM BUTTON
Press to turn alarm on or off. Press
once for Wave wake-up and twice
for Alarm wake-up. Press three times
for both features. Press a fourth time
to deactivate alarm. Alarm status is
indicated on the clock display.
ALARM SET BUTTON
Press to activate alarm set mode. Press the
hour (head up/down) and minute (foot up/
down) buttons to set time. To exit mode,
press any other button on the hand control.
WAVE ON/OFF BUTTON
Press and hold the increase arrow—
after the head and/or foot massage
have been activated—to activate the
wave vibration system. To turn wave
vibration system off, press and hold
the decrease arrow until the wave
turns off.
HEAD UP/DOWN BUTTON
Press and hold to raise or lower the
head section.
HEAD MASSAGE BUTTON
Press and hold the increase arrow
to turn the massage on at medium
intensity. Adjust massage intensity
using increase and decrease arrows.
To turn off, press and hold the
decrease arrow until the massage
turns off.
LEVEL BUTTON
Press to return the bed to the flat
position.
POSITION BUTTONS
Press and release to return the bed to
one of the four positions programmed
using the S button.
DISPLAY
Indicates current time when no features
are being activated. When sleep timer
is set, displays time remaining in cycle.
Prodigy™ HAND CONTROL FUNCTION
NOTE
haNd cONTrOl rEquirEs fOur (4) aaa sizE baTTEriEs. TO cONsErvE
baTTEry lifE, ThE TraNsmiTTEr TurNs Off all fuNcTiONs whEN
aNy buTTON is prEssEd fOr mOrE ThaN 50 sEcONds.
FOOT MASSAGE BUTTON
Press and hold the increase arrow
to turn the massage on at medium
intensity. Adjust massage intensity
using increase and decrease arrows.
To turn off, press and hold the decrease
arrow until the massage turns off.
SET BUTTON
Press to capture any position or
function (massage or wave) of the bed
as a programmed position. To program,
press the S button. When the display
shows Set, within 2 seconds press the
1, 2, 3, or 4 button to save the current
setting. when programmed, position 1
is the default sleep position and postion
3 is the default anti-snore position.Up
to four positions may be saved.
TIME SET BUTTON
Press to active time set mode. Press the
hour (head up/down) and minute (foot up/
down) buttons to set time. To exit mode,
press any other button on the hand control.
ADDITIONAL BUTTON FUNCTIONS
1. Sleep timer — Press the S button two (2) times to program the Sleep timer for 30 minutes
or three (3) times for 60 minutes. After the allotted time, the bed will return to program set
position 1.
2. Anti-Snore — Press Set button 3 to activate the anti-snore feature. The bed will go to
position 3 and after 30 minutes, the bed will return to position 1. Note: the bed has a
default position 3 setting of head up seven (7) degrees, which can be re-programmed by
the user.
Prodigy™ Owners Manual 99301XXX
13
TROUBLESHOOTING
In the event the Prodigy™ adjustable bed fails to operate, investigate the symptoms and
possible solutions provided in the chart below:
SYMPTOM SOLUTION
• Verify power cord is plugged into a working,
grounded electrical outlet. A grounded,
electrical surge protection device is recommended.
Test outlet by plugging in another working appliance.
• Program the hand control (see Hand Control
Programming section of this manual for
programming procedures).
• Unplug power cord, wait 30 seconds and plug in to
reset electronic components.
• Electrical circuit breaker may be tripped. check
electrical service breaker box to verify.
• Defective surge protection device or electrical outlet.
Test outlet by plugging in another working appliance.
• Replace batteries in the hand control.
• Bed mechanism may be obstructed. Elevate bed and
check for obstruction. Remove obstruction.
• Head section may be too close to the wall.
• Headboard may be too close the edge of the
mattress. Verify a 1.5” (38.1mm) to 2” (50.8mm)
distance between headboard brackets and mattress.
Adjust if required.
• Verify headboard brackets were removed during
installation. Remove headboard brackets if still
attached to the underneath side of bed.
• If bed is located on hard surface flooring, place
carpet pieces or rubber caster cups under each leg
or caster of the bed. (See accessory section of this
manual for rubber caster cup order information.)
• Elevate the head or foot section a short distance
(with the hand control) to realign the lift/lower
mechanisms with the bed support platform.
• Verify that bed is not positioned against a wall,
nightstand, or other object that may cause vibration
or noise.
• If adjustable bed is installed over a bed frame, verify
massage motors are not causing bed frame (or bed
frame components) to vibrate.
• Verify that headboard attachment hardware is
tightened firmly (if used).
Hand control illuminates and appears to be
operable, but will not activate bed.
No features of the adjustable bed will
activate.
Hand control will not illuminate.
Head or foot section will elevate, but will not
return to the horizontal (flat) position.
Excessive massage motor noise.
Prodigy™ Owners Manual 99301XXX
14
ACCESSORIES
Prodigy™
OPTIONAL EQUIPMENT
Contact customer service toll free (800-888-3078) to order the accessories indicated in
the chart below.
4B2385 4B1954
4B1034
4B1209
4B1792
4B3402
ACCESSORY DESCRIPTION CODE
Glides1 (set of 4, replaces legs) 4B2385
3” Legs (set of 4) 4B2284
5” Legs (set of 4) 4B2100
Swing-away Hinges2 4B1209
Screw-in Locking Casters1 (set of 4, replaces legs) 4B1954
Bed Straps (connects two lifestyles™ beds together) 4B1792
5” Adjustable Leg Kit3 (adjustment range: 6-1/8” to 9-3/8”) 4B3402
Rubber Caster Cups (set of 4) 4B1034
1 Headboard brackets cannot be used with glides or screw-in locking casters.
2 Swing-away hinges are designed for use with dual queen or dual king size adjustable bed bases.
The swing-away hinge allows easy access between two mated beds for domestic cleaning (i.e.
sweeping, changing sheets) by swinging the beds apart.
3 Leg kit contains 6 adjustable legs and pre-cut foam rubber stripping for use with center support
system.
4B2284
4B1833
4B2100
4B2101
Prodigy™ Owners Manual 99301XXX
15
1-2-LIFETIME WARRANTY
Leggett & Platt, Incorporated (“L&P”) warrants this adjustable bed to the consumer who is the
original purchaser (the “purchaser”), subject to the terms and conditions set forth herein. This
warranty begins on the “warranty commencement date” which is the date of purchase for new
unused beds and the date of manufacture for beds that have been used as floor or display
models. Thus, on a floor model bed, the warranty is a portion of the limited lifetime warranty.
FULL 1 YEAR WARRANTY
This adjustable bed is warranted against
defects in the workmanship or materials
for a period of one (1) year from the
warranty commencement date. Upon notice
during the first year after the warranty
commencement date, L&P will repair or
replace (at no cost to the purchaser) any
defective adjustable bed part, and L&P will
pay all authorized labor and transportation
costs associated with the repair or
replacement of any parts found to be
defective.
2 YEAR LIMITED WARRANTY
During the second year from the warranty
commencement date, upon receipt of
notice, L&P will replace any adjustable bed
part found to be defective. This limited two
(2) year warranty shall not apply unless
the defective part is returned to L&P within
ten (10) days of purchaser’s receipt of the
replacement part. Purchaser shall pay all
service and transportation costs related to
the replacement of the defective part.
LIFETIME LIMITED WARRANTY
Upon notice during the third year
through the lifetime from the warranty
commencement date, L&P will replace,
upon terms and conditions set forth in this
paragraph, any mechanical bed part found
to be defective. Electronics, electrical
components, drive motors and massage
motors are excluded. This limited lifetime
warranty shall not apply unless the defective
part is returned to L&P within ten (10) days of
purchaser’s receipt of the replacement part.
In years 3 - lifetime, purchaser shall pay all
service and transportation costs related to
the replacement of the defective part.
ADDITIONAL TERMS AND CONDITIONS
This warranty does not apply; (a) to any
damage caused by the purchaser; (b) if
there has been any repair or replacement
of adjustable bed parts by an unauthorized
person; (c) if the adjustable bed has been
mishandled (whether in transit or by other
means), subjected to physical or electrical
abuse or misuse, or otherwise operated in
any manner inconsistent with the operation
and maintenance procedures outlined in
the Owners Manual and this warranty; (d)
to damage to mattresses, fabric, cables,
electrical cords or items supplied by dealers.
Contact the dealer for warranty information
on these items; (e) if there has been any
modification of the adjustable bed without
prior written consent by L&P; (f) to costs for
unnecessary service calls, including costs for
in-home service calls solely for the purpose
of educating the consumer about the
adjustable bed or finding an unsatisfactory
power connection; (g) if the recommended
weight restriction is not followed (refer to
the advisory section of this manual), the
warranty will be void.
Continued on next page...
Prodigy™ Owners Manual 99301XXX
16
Repairs to or replacement of an adjustable
bed or its components under the terms of
this limited warranty will apply to the original
warranty period and will not serve to extend
such period.
The decision to repair or to replace defective
parts under this warranty shall be made, or
cause to be made, by L&P at its option and in
its sole discretion.
Repair or replacement shall be the sole
remedy of the purchaser. There shall be no
liability on the part of L&P for any special,
indirect, incidental, or consequential
damages or for any other damage, claim, or
loss not expressly covered by the terms of
this warranty.
This limited warranty does not include
reimbursement for inconvenience, removal,
installation, setup time, loss of use, shipping,
or any other costs or expenses. Leggett &
Platt or its service technicians shall not be
responsible for moving furniture or any other
items not attached to the adjustable bed in
order to perform service on the adjustable
bed.
It is the sole responsibility of the purchaser
to provide adequate space and accessibility
to the adjustable bed. In the event that the
technician is unable to perform service due
to lack of accessibility, the service call will be
billed to the purchaser and the service will
have to be rescheduled.
L&P makes no other warranty whatever,
express or implied, and all implied
warranties of merchantability and fitness
for a particular purpose are disclaimed by
L&P and excluded from this agreement.
Some states do not allow the exclusion or
limitation of incidental or consequential
damages, so the above limitation or
exclusion may not apply to every purchaser.
This warranty gives the purchaser specific
legal rights, and the purchaser may also have
other rights, which may vary from state to
state. This warranty is valid in all 50 states,
Puerto Rico, and Canada.
1-2-LIFETIME WARRANTY
WARRANTY INFORMATION
PO Box 668
Lexington, NC 27293
800-888-3078
For customer service online, email:
accustomerservice@leggett.com
Please do not contact retail dealer or any other service personnel.
