Raymarine Belgium Bvba T120-916 mn100 Wind Transmitter User Manual uu043 wind transmitter

Download:
Mirror Download [FCC.gov]
Document ID	448444
Application ID	NogsQGLbm8oKRSiKKu89Yg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	3.62kB (45282 bits)
Date Submitted	2004-07-09 00:00:00
Date Available	2004-07-09 00:00:00
Creation Date	2003-10-28 18:49:04
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2003-10-28 18:49:04
Document Title	Microsoft Word - uu043 wind transmitter.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Steve

Wind Transmitter
Wind Transmitter
Tacktick Limited
22 North Street, Emsworth,
Hampshire, PO10 7DG, England
Tel. +44 (0)1243 379331
Fax. +44 (0) 1243 379199
www.tacktick.com
Tacktick Limited
22 North Street, Emsworth,
Hampshire, PO10 7DG, England
Tel. +44 (0)1243 379331
Fax. +44 (0) 1243 379199
www.tacktick.com
Tools Required
Parts List
Tools Required
Parts List
1.
2.
3.
1.
2.
3.
1.
2.
3.
1.
2.
3.
Drill Bit
Power Drill
Cross Head Screwdriver
Masthead Mounting Plate
Wind Transducer
Mounting Screws (3 off)
Drill Bit
Power Drill
Cross Head Screwdriver
Masthead Mounting Plate
Wind Transducer
Mounting Screws (3 off)
Precautions
Precautions
Carry out the “Auto Network” procedure and make sure the unit is
operating correctly BEFORE attaching the Wind Transmitter to the
masthead. Ensure that there is enough surface area at the top of the mast
to attach the Transmitter Base. Check to make sure that the vane and
anemometer cups are moving freely.
Carry out the “Auto Network” procedure and make sure the unit is
operating correctly BEFORE attaching the Wind Transmitter to the
masthead. Ensure that there is enough surface area at the top of the mast
to attach the Transmitter Base. Check to make sure that the vane and
anemometer cups are moving freely.
Positioning Advise
Positioning Advise
uu043 rev. 7
uu043 rev. 7
Installation Method
Installation Method
1.
Complete the auto-networking procedure (described on the
yellow instruction sheet) at deck level and ensure that Wind
Speed and Angle are being displayed on the instruments.
1.
Complete the auto-networking procedure (described on the
yellow instruction sheet) at deck level and ensure that Wind
Speed and Angle are being displayed on the instruments.
2.
Get an authorised dealer to ascend the mast and carefully mark
and drill the three mounting holes using the supplied Template.
Care should be taken to ensure the Template is positioned facing
forward.
2.
Get an authorised dealer to ascend the mast and carefully mark
and drill the three mounting holes using the supplied Template.
Care should be taken to ensure the Template is positioned facing
forward.
3.
Secure the Wind Transmitter to the masthead using the three
self tapping screws provided.
3.
Secure the Wind Transmitter to the masthead using the three
self tapping screws provided.
NOTE: It may be necessary to use alternative mounting screws or bolts
depending on the masthead plate.
NOTE: It may be necessary to use alternative mounting screws or bolts
depending on the masthead plate.
4. Check for smooth and free operation of the anemometer cups and the
windvane feather before descending to deck level.
4. Check for smooth and free operation of the anemometer cups and the
windvane feather before descending to deck level.
WARNING:
Always ensure that you are secured correctly before ascending any mast.
Always attach a safety strap to the masthead whilst you are working and
leave a competent person on deck to assist. If in doubt get a professional
to ascend the mast.
WARNING:
Always ensure that you are secured correctly before ascending any mast.
Always attach a safety strap to the masthead whilst you are working and
leave a competent person on deck to assist. If in doubt get a professional
to ascend the mast.
What Next
What Next
Refer to the instrument handbook for details on calibration and alignment.
Refer to the instrument handbook for details on calibration and alignment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:07eadd99-6aef-4deb-91d4-46a6a9b7ac2e
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2003:10:28 18:49:04Z
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2003:10:28 18:49:04Z
Document ID                     : uuid:a25667da-7304-4094-a9a1-5c7f970f50f8
Format                          : application/pdf
Creator                         : Steve
Title                           : Microsoft Word - uu043 wind transmitter.doc
Author                          : Steve

EXIF Metadata provided by EXIF.tools