Rayson Technology B8Z869 TV Transmitter, Smart Transmitter User Manual TV transmitter rev

Rayson Technology Co., Ltd. TV Transmitter, Smart Transmitter Users Manual TV transmitter rev

Contents

Users Manual (TV transmitter)_rev

TV TransmitterUser Guide | Maer
2 ContentBefore you art  3Included in delivery  4Components  4Getting arted  5Connecting to power supply  5Connecting to audio devices  6Pairing the transmitter  7Daily use  8Using the transmitter  8LED atus indication  9Important safety information  11Personal safety  11Product safety  13Important information  15Explanation of symbols  15Maintenance and care  16Disposal information  16Conformance information  16
3 Before you art The transmitter is an accessory for our remote controls with audio reaming capability. The transmitter connects TV, ereo, or MP3 player as well as many other electronic devices without Bluetooth®* functionality to the remote control for your hearing inruments. Using the transmitter you will wirelessly ream sounds directly into the hearing inruments.CAUTIONRead this user guide thoroughly and completely and follow the safety information in this document to avoid damage or injury. * The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Signia GmbH is under licenses. Other trademarks and trade names are those of their respective owners.
4 Included in delivery● Transmitter● Power plug with dierent adapters● USB power cable● Audio cable with 3.5 mm ereo plugs● Adapter RCA (cinch) to 3.5 mm ereo socket● TOSLINK cable Components➊ On/o button➋ LED atus indicator (green, blue, orange)➌ Volume buttons➍ TOSLINK connection➎ Connection for andard line‑in devices with 3.5 mm audio jack➏ USB port for power supply
5 Getting arted Connecting to power supplyNOTICEPlease make sure that the power plug is easily accessible to remove it from power supply if necessary.Only use the USB power cable and power adapter that came with the device. Select the adapter that is used in your country.XConnect the micro USB side of the USB power cable to the transmitter ➊.XConnect the other side of the USB power cable to the power plug ➋.XConnect the power plug to the power supply ➌.
6 Connecting to audio devicesUse the supplied cables and adapters.Further information:● When using the TOSLINK cable: ● Before connecting the cable, remove the protection caps from the TOSLINK cable plugs.● To prevent the TOSLINK cable from breaking, do not forcefully bend it.● Set the output format of the TV or audio device to "uncompressed PCM audio" (PCM = pulse-code modulation).Compressed audio format (like surround sound) is not supported by the transmitter. This will be indicated by a flashing orange LED .● If the two inputs of the transmitter are connected to dierent audio devices, the device connected via TOSLINK cable has the higher priority and the audio
7 signal of this device will be reamed to your hearing inruments. The audio signal of the other device will not be reamed. Pairing the transmitterThe remote control for your hearing inruments has to be paired once with the transmitter.XFollow the inructions in the remote control's user guide.
8 Daily useUsing the transmitterXCheck if the green LED shines (transmitter is turned on and ready for audio reaming).If the green LED is o, press to turn the transmitter on.XTo art audio reaming, use the remote control for your hearing inruments: Set up the remote control for your hearing inruments so that audio reaming with our transmitters is active. Follow the inructions in the remote control's user guide.When the blue LED shines , audio reaming is active.XTo adju the volume of the reamed audio signal, press (volume up) or (volume down) on the transmitter.You can also adju the volume with the remote control for your hearing inruments or with the controls of your hearing inruments.If you intend not to use the transmitter for a longer period of time, you can turn it o by pressing .
9 LED atus indicationGreen LED on➧ Transmitter is on. It is ready for pairing or audio reaming.Green LED o ➧ Transmitter is o.The blue LED shows the atus of the Bluetooth connection between transmitter and remote control for your hearing inruments.Blue LED on➧ Audio reaming is active.Blue LED o➧ No audio reaming is active.
10 The orange LED shows the atus of the TOSLINK connection.Steady orange light➧ TOSLINK cable is connected and audio signal in the required format is available. Refer to section "Connecting to audio devices".Flashing➧ TOSLINK cable is connected, but the audio signal has the wrong format. Refer to section "Connecting to audio devices".Orange LED o➧ No TOSLINK cable is connected or the cable is not connected properly.➧ TV or audio device is switched o.➧ TOSLINK cable is broken.
11 Important safety informationPersonal safetyWARNINGChoking hazard!Your device contains small parts which can be swallowed.XKeep hearing inruments, batteries and accessories out of reach of children and mentally disabled persons.XIf parts have been swallowed consult a physician or hospital immediately.WARNINGRisk of electrical shock!XDo not use obviously damaged devices and return them to point of sale.WARNINGNote that any unauthorized changes to the product may cause damage to the product or cause injury.XUse only approved parts and accessories. Ask your Hearing Care Professional for support.
12 WARNINGRisk of electric shock!XConnect audio input only to a device conforming to IEC 60065, the IEC-Norm for audio, video and other electronic devices.WARNINGInterference with implantable devicesXThe device can be used with all electronic implants that comply with the ANSI/AAMI/ISO 14117:2012 Electromagnetic compatibility andard for human implants.XIn case your implant does not comply with the ANSI/AAMI/ISO 14117:2012 andard, consult the manufacturer of your implantable device for information about the risk of diurbance.WARNINGThis device may interfere with measuring and electronic equipment.XDo not use your device on airplanes or areas where sensitive or life‑supporting electronic equipment is used.WARNINGRisk of explosion!XDo not use your device in explosive atmospheres (e. g. in mining areas).
13 Product safetyNOTICEXProtect your devices from extreme heat. Do not expose them to direct sunlight.NOTICEXProtect your devices from high humidity.NOTICEXDo not dry your devices in the microwave oven.NOTICEDierent types of rong radiation, e. g. during X‑ray or MRI head examinations, may damage devices.XDo not use the devices during these or similar procedures.Weaker radiation, e. g. from radio equipment or airport security, does not damage the devices.In some countries rerictions for the usage of wireless equipment exi.XRefer to local authorities for further information.
14 NOTICEYour hearing inruments are designed to comply with international andards on electromagnetic compatibility but interference with nearby electronic devices could occur. In this case, move away from the source of interference.
15 Important information Explanation of symbolsSymbols used in this documentPoints out a situation that could lead to serious, moderate, or minor injuries.Indicates possible property damage.Advice and tips on how to handle your device better.Symbols on the device or packagingCE compliance label, conrms compliance with certain European Directives, refer to section "Conformance information".EMC and radio communications compliance label Auralia, refer to section "Conformance information".Indicates the legal manufacturer of the device.Do not dispose of the device with general domeic wae. Read more in section "Disposal information".Read and follow the inructions in the user guide.
16 Maintenance and careNOTICEXDo not put your device in water!XDo not clean your device with alcohol or benzine.X Clean the device as necessary with a soft tissue.XAvoid abrasive cleaning liquids with additives such as citric acids, ammonia, etc. Disposal information Recycle devices, accessories and packaging according to local regulations. Conformance informationThe CE mark indicates conformity with the following European directives:● 2014/30/EU concerning electromagnetic compatibility● 2014/35/EU concerning electrical equipment designed for use within certain voltage limits● 2014/53/EU (RED) concerning radio equipment● 2011/65/EU RoHS concerning the reriction of hazardous subances
17 Wireless functionalityFCC: QWOB8Z869IC: 4460A-B8Z869FCC and ISED compliance information can be found on the back of the device.The ACMA compliance mark indicates conformity with the electromagnetic interference andards set by the Auralian Communications and Media Authority (ACMA).Devices with the FCC marking comply with the andards of the FCC regarding electromagnetic interference.This Class B digital apparatus complies with Canadian ICES-003.This device complies with Part 15 of the FCC Rules and with ISED's licence-exempt RSSs.Operation is subject to the following two conditions:● This device may not cause harmful interference, and● this device mu accept any interference received, including interference that may cause undesired operation.This equipment has been teed and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection again harmful interference
18 in a residential inallation. This equipment generates, uses and can radiate radio frequency energy and, if not inalled and used in accordance with the inructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular inallation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:● Reorient or relocate the receiving antenna.● Increase the separation between the equipment and receiver.● Connect the equipment to an outlet on a circuit dierent from that to which the receiver is connected.● Consult the dealer or an experienced radio/TV technician for help.FCC caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter mu not be co-located or operating in conjunction with any other antenna or transmitter.
19 Radiation exposure atementsThis equipment complies with FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be inalled and operated with a minimum diance of 20 cm between the radiator and your body.Bluetooth radio frequency bandAll channels supported from 2402 MHz to 2480 MHz with channel centers at every 1 MHz (2402 MHz, ..., 2479 MHz, 2480 MHz) i.e. 79 channels.Risk mitigations (for internal use only) Bluetooth radio frequency band..............................................................19FCC/ISED atement for mobile device usage (> 20cm/low power).......19Intended Use ..........................................................................................3M06 | audio input IEC 60065 ..................................................................12M11 | explosion | device .........................................................................12M15, M210 | choking | ACC ....................................................................11M20_1/4 | heat | ACC .............................................................................13M20_2/4 | humidity | ACC .......................................................................13M20_3/4 | microwave | ACC ...................................................................13M20_4/4 | Xray | ACC .............................................................................13M23 | wireless interference .....................................................................14M25_1/2 | interference with implants from RA V30 | only easyTek and transmitter...............................................................................................12M25_2/2 | interference with measuring equipment from RA V31 ...........12M29 | recycle device ...............................................................................16M60 | turning on/o .................................................................................8M92, M228 | damaged device | ACC with power supply ........................11M103 | cleaning ......................................................................................16M110 | unauthorized modications .........................................................11
www.signia-hearing.comDocument No. 02992-99T##-#### ##Order/Item No. ### ### ##Master Rev01, 06.2016© Signia GmbH, ##.2016 Legal ManufacturerSignia GmbHHenri-Dunant-Strasse 10091058 ErlangenGermanyPhone +49 9131 308 0Manufactured by Signia GmbH under Trademark License of Siemens AG.

Navigation menu