Rca Rs2767I Owner S Manual

: Rca Rca-Rs2767I-Owner-S-Manual rca-rs2767i-owner-s-manual rca pdf

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

FCC information

user manual

RS2767i

CLOCK

TIMER

DIMMER

SLEEP
DISC SKIP

DEMO

AUTO
PROG BAND

TUNE

TUNE

SOURCE
PRESET

PRESET

PROGRAM

SHUFFLE

PLAY MODE

EQ

LINE IN
L
AUX IN
R

It is important to read this instruction prior to using your new product
for the first time.

Important information

This device complies with part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference
that may cause undesired operation.
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to part 15 of the FCC
Rules. These limits are designed
to provide reasonable protection
against harmful interference in
a residential installation. This
equipment generates, uses and
can radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference
to radio communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and
on, the user is encouraged to try to
correct the interference by one or
more of the following measures:
– Reorient or relocate the
receiving antenna.
– Increase the separation between

Headset safety

Unpacking the system

• This compact disc player
uses a laser to read the
music on the disc. The laser
mechanism corresponds to
the cartridge and stylus of a
record player. Although this
product incorporates a laser
pick-up lens, it is completely
safe when operated
according to directions.
• Discs rotate at high speed
inside the player. Do not
use damaged, warped, or
cracked discs.
• Do not touch the pick-up
lens which is located inside
the disc compartment. To
keep dust from collecting
on the pick-up lens, do not
leave the compartment
door open for an extended
period of time. If the lens
becomes dirty, clean it with
a soft brush, or use an air
blower brush designed for
camera lenses.

• Have a Blast- Just
Not in your eardrums!
Make sure you turn
down the volume on the unit
before you put on headphones.
Increase the volume to the
desired level only after
headphone are in place.
• Do not play your headset
at high volume. Hearing
experts warn against
extended high-volume play.
• If you experience ringing in
your ears, reduce volume or
discontinue use.
• You should use with extreme
caution or temporarily
discontinue use in potentially
hazardous situations.
Even if your headset is an
open-air designed to let you
to hear outside sounds, do
not turn up the volume so
high that you are unable to
hear what is around you.
• Excessive sound pressure from
earphones and headphone can
cause hearing loss.

You should have the following:
• one main unit (with 2 main
speakers)
• one remote control
• one AM loop antenna
• one user manual

SHUFFLE – To turn on/off
random CD playback.

FM ST. – To switch between FM
stereo and mono modes.

MENU – To display iPod menu;
and return to previous menu.

DISC SKIP – To skip to next CD.

SELECT – To confirm iPod menu
lists.

– To play and pause the
CD/iPod playback.
PREV/ ,NEXT/ – To tune
radio frequency; to skip CD/iPod
track; to fast search through the
CD/iPod.
OPEN/CLOSE – To open and
close CD disc tray.

– To mute and restore audio
output.

CLASS 1
LASER PRODUCT

This audio system
has earned the
ENERGY STAR.

PRESET
– To select previous
/ next tuner preset station;
To navigate the iPod menu list.
SLEEP – To select the time
interval in minutes before the
unit turns off.

The remote control
must be inserted with
2 “AAA” batteries prior
to use.

SEE MARKING ON BOTTOM / BACK OF PRODUCT

CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USERSERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.

THE EXCLAMATION POINT WITHIN THE
TRIANGLE IS A WARNING SIGN ALERTING
Y O U O F I M P O RTA N T I N S T R U C T I O N S
ACCOMPANYING THE PRODUCT.

For your safety

Technical information

The AC power plug is polarized
(one blade is wider than the
other) and only fits into AC power
outlets one way. If the plug won’t
go into the outlet completely, turn
the plug over and try to insert
it the other way. If it still won’t
fit, contact a qualified electrician
to change the outlet, or use a
different one. Do not attempt
to bypass this safety feature.

Product: Audio System
Brand: RCA
Model: RS2767i
Power Supply: 120V ~ 60Hz
Power Consumption: 240 Watts

Service information
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this Guide.

IMPORTANT SAFETY INSTRUCTIONS
Some of the following information
may not apply to your particular
product; however, as with any
electronic product, precautions
should be observed during
handling and use.
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near
water.
• Clean only with dry cloth.
• Do not block any ventilation
openings.
Install in accordance with the
manufacturer’s instructions.
• Do not install near any heat
sources such as radiators, heat
registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
• Do not defeat the safety
purpose of the polarized
or grounding-type plug. A
polarized plug has two blades
with one wider than the
other. A grounding type plug
has two blades and a third
grounding prong. The wide

Using FM and AM antennas
Before you use your audio
system, you’ll want to make sure
both the FM and AM antennas
are positioned properly. Uncoil
the FM antenna at the back of
the unit, making sure it is fully
extended (you may even want
to tape it to the wall behind the
unit if possible, the higher the
better).

Back view
1. FM pigtail antenna
2. AM loop antenna jack
3. Main speaker jacks

3

Connecting main speakers
Each speaker has a red/black
wire and a purple/black wire.
When connecting the speakers,
match the red/black wires to
the red/black jacks and the purple
/black wires to the purple/black
jacks on the main unit.

Main Unit

Installation

•
•

4”

4”

CLOCK – To show time and
enter clock setting mode.
CLOCK

TIMER

DIMMER

SLEEP
DISC SKIP

DEMO

AUTO
PROG BAND

TUNE

TUNE

SOURCE
PRESET

4”

4”

2”

TIMER – To turn the timer on/
off; press and hold to enter the
timer setting mode.

PRESET

DIMMER•DEMO – To turn the
feature demonstration on or
off; to adjust display brightness.

PROGRAM

SHUFFLE

Push Speaker
terminal tab
down to insert
wire.

Release tab to
lock wire in
the terminal.

Front view

EQ

Side view

LINE IN
L
AUX IN
R

Source indication

CD tray status:
Lights when loaded
Flashes for the current disc
Animates when playing

Radio bands
BASS – bass boost activated
STEREO – FM stereo mode activated
EQ – preset equalizer activated

Display brightness
1. Press and hold DIMMER•DEMO
for more than 2 seconds.
2. While “DIM” is displayed,
press DIMMER•DEMO
repeatedly to select the
desired level (DIM 1–3).

Setting the clock
1. Press and hold CLOCK until
the hour flashes on the display.
2. Press
/
to set the hour
and then press CLOCK to
shift to minute digits.
/
to set the minute.
3. Press
4. Press CLOCK to save settings
or to quit setting.
• When system is
ON, you can press
CLOCK to display
the current time for
about 2 seconds.
• When the system is OFF
(standby), the display will
turn off to save power.

Setting the timer
1. Press and hold TIMER until
ON (timer on time) appears
with the hour flashing.
/
2. For setting time, press
to set the hour and then
press TIMER to shift to the

SLEEP – To select the time
interval in minutes before the
unit turns off.
– To open or close the disc tray.

Please also ensure that you
connect the wires from the right
speaker to the jacks marked “R”
and that you connect the wires
from the left speaker to the jacks
marked “L”.

ON/STANDBY – To turn power
on or off (STANDBY mode).
AUTO PROG•BAND – To
change between FM and AM
tuner bands; to enter auto
preset program in FM mode.
SOURCE – To select among CD
PLAYER, TUNER, iPod, LINE IN,
and AUX sources.

Clock and timer

Showing demonstration
Press DIMMER•DEMO to turn
on/off demonstration mode.
The demonstration scrolls
through all display operations.

•

PROGRAM – To enter program
mode for CD and tuner.

To ensure sufficient ventilation,
keep the spacing shown below
free from other surfaces:

NOTE: Make sure the insulation
is completely removed from the
ends of the speaker wires at all
connection points.

PROG – program playback
mode activated
SLEEP – sleep mode activated

•

PLAY MODE

You’ll also need to connect the
AM antenna loop to the back
of the unit if you listen to AM
stations. Rotate the AM loop
antenna for better reception.

2

Playback
mode
status
Timer activated

•

blade or the third prong is
provided for your safety. If
the provided plug does not
fit into your outlet, consult an
electrician for replacement of
the obsolete outlet.
Protect the power cord
from being walked on or
pinched particularly at plugs,
convenience receptacles, and
the point where they exit from
the apparatus.
Only use attachments/
accessories specified by the
manufacturer.
Use only with the
cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or sold with the
apparatus. When a cart is used,
use caution when moving the
cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during
lightning storms or when
unused for long periods of time.
Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus

•
•

•

•
•
•

has been damaged in any way,
• Do not attempt to disassemble the
cabinet. This product does not contain
such as power-supply cord or
customer serviceable components.
plug is damaged, liquid has been
spilled or objects have fallen into • Where the main plug or an appliance
the apparatus, the apparatus
coupler is used as the disconnect
has been exposed to rain or
device, the disconnect device shall
remain readily operable.
moisture, does not operate
normally, or has been dropped. • IF YOUR PRODUCT OPERATES
ADDITIONAL SAFETY
ON BATTERIES, adhere to
INFORMATION
the following precautions:
A. Do not mix old and new
Apparatus shall not be exposed
batteries.
to dripping or splashing and no
B. Do not mix alkaline, standard
objects filled with liquids, such
(carbon-zinc), or rechargeable
as vases, shall be placed on the
(NiCd, NiMH,etc) batteries.
apparatus.
C. Any battery may leak
Always leave sufficient space
electrolyte or explode if
around the product for
disposed of in fire or an attempt
ventilation. Do not place
is made to charge a battery not
product in or on a bed, rug,
intended to be recharged.
in a bookcase or cabinet that
D. Discard leaky batteries
may prevent air flow through
immediately. Leaking batteries
vent openings.
can cause skin burns or
Do not place lighted candles,
other personal injury. When
cigarettes, cigars, etc. on the
discarding
batteries, be sure to
product.
dispose of them in the proper
Connect power cord only to
manner, according to your state/
AC power source as marked on
provincial and local regulations.
the product.
Care should be taken so that
E. Battery shall not be exposed to
excessive heat such as sunshine, fire
objects do not fall into the product.
or the like.

General controls

Connections

1

PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE

THE LIGHTNING FLASH AND ARROWHEAD
WITHIN THE TRIANGLE IS A WARNING
SIGN ALERTING YOU OF "DANGEROUS
VOLTAGE" INSIDE THE PRODUCT.

WARNING: TO PREVENT FIRE OR ELECTRICAL SHOCK HAZARD, DO NOT
EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE.
WARNING: MAINS PLUG IS USED AS DISCONNECT DEVICE AND IT SHOULD
R E M A I N R E A D I LY O P E R A B L E D U R I N G I N T E N D E D U S E . I N O R D E R T O
DISCONNECT THE MAINS PLUG FROM MAINS COMPLETELY, THE MAINS PLUG
SHOULD BE DISCONNECTED FROM THE MAINS SOCKET OUTLET COMPLETELY.

CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.

INTRO – To turn INTRO mode
on or off to play the first 10
seconds of each CD track.

STOP – To stop playing CD/iPod.
PLAY MODE – To cycle between
different CD play mode.

This Class B digital apparatus complies
with Canadian ICES-003.

Display

INFO – To select among disc
display information.

VOL+ / VOL– – To increase/
decrease the volume.

WARNING: Changes or modifications
to this unit not expressly approved
by the party responsible for
compliance could void the user's
authority to operate the equipment.

CAUTION

RISK OF ELECTRIC SHOCK
DO NOT OPEN

Getting started

Precations

General controls

the equipment and receiver.
– Connect the equipment into
an outlet on a circuit different
from that to which the receiver
is connected.
– Consult the dealer or an
experienced radio/TV technician
for help.

Activating the timer
Press and release TIMER to turn
on/off the timer. The timer is
is
active when the clock icon
lit.

– To stop CD/iPod playback.

Press
on the remote control
to cut or restore the sound.

Using preset equalizer curves
Press EQ on the unit to select
among FLAT, ROCK, POP, JAZZ,
CLASSIC and CUSTOM. The display
shows your selection briefly.
Creating a Custom Curve
1. Press EQ on the unit to
select the CUSTOM mode.
2. While CUSTOM is displayed,
press
/
to cycle among
the displayed BASS and TREB
range levels.
3. While BASS or TREB is
displayed, adjust the volume
to set the associated gain
between -10 - +10.
4. Press EQ to exit.

VOL

VOL

STOP

PLAY MODE

MENU

SHUFFLE

SELECT

PRESET

AUX IN•L/R – Jacks for external
sound input.

/
– To tune radio
frequency; to skip CD/iPod
track; to fast search through the
CD/iPod.

Muting audio

LINE IN/
AUX

DISC SKIP

INTRO

SLEEP

LINE IN – Ø3.5mm jack for
external sound input.

– Jack for connecting
headphones.

Press BASS to turn on/off
boosting the bass frequency. The
BASS icon lights on the display
when it is activated.

iPod

FM ST.

OPEN/CLOSE

PLAY MODE – To cycle between
different CD play mode.

EQ – To select the equalizer
presets.

Bass boost

SOURCE

SHUFFLE – To turn on/off
random CD playback.

VOLUME – To increase/decrease
the volume.

You can select the time interval
in minutes before the unit turns
off automatically.
1. Press SLEEP to select among
OFF, 120, 90, 60, 45, 30, 15, 10
and 5 minutes. The sleep icon
lights on the display when
sleep mode is activated.
2. When sleep is activated,
press SLEEP once to view
remaining sleep time.
Press SLEEP again when
the remaining sleep time
is displayed to change the
sleep time.
• Sleep is automatically deactivated when the unit is
turned off.

TUNER
CD

PRESET / – to select the
previous or next preset stations
in tuner mode.

BASS – To turn BASS on or off.

Sleep mode

Remote control
INFO

DISC SKIP – To skip to the next
CD in the tray.

Sound features
minute digits.
/
to set the
3. Press
minute.
4. Press TIMER to change to OF
(timer off time) with hour
flashing. Repeat steps 2 & 3
for timer off time setting.
5. Press TIMER to select the
source. Press
/
to select
among TUNER, CD or iPod.
6. Press TIMER to select the
volume. Adjust the timer
/
volume by
on main
unit or remote control to
select the desired volume
level.
7. Press TIMER to save settings
or to quit setting.

– To play or pause CD/iPod.

– To turn power on or off
(STANDBY mode).
CD – To select the CD player.
TUNER – To select the tuner
and change the radio band.
iPod – To select iPod playback.
LINE IN / AUX – To select the
external sound input from LINE
IN / AUX IN jacks.

CD playback
This unit is compatible
with CD-RW/ CD-R discs
for playback.
CD-R / RW

Notes on CD-R/RW Disc:
• Do not affix any type
of labels to either side
(recordable or labeled
side) of a CD-R/RW disc as
this may result in the unit
malfunctioning.
• To avoid damages to the
CD-R/RW disc, do not open
the disc compartment door
while the disc is being read.
• Do not load an unrecorded
CD-R/RW disc into the unit.
This may take a longer time
to read the disc.
• Playback capability for CDRW discs may vary due to
variations in the quality of
the CD-RW disc and the
recorder used to create the
disc.

CD playback
Please take care
when loading or
unloading discs in the
disc drawer. Read below for
details.
Remove all discs from the
disc drawer before moving
or transporting the unit.
Do not put discs in the
trays of the disc drawer
when they are still
moving.
Do not push or force the
rotation of the disc trays.
Always use the DISC SKIP
button.
Do not put discs in any
unexposed disc trays.
When an error occurs and
the disc drawer does not
close, empty all disc trays
and try again.

iPod playback

CD program
Loading discs
1. Press SOURCE repeatedly to
select CD mode.
2. Press OPEN/CLOSE or
to
open the drawer.
3. Insert up to five discs with
label face up. (Press DISC
SKIP to rotate the disc
carrier.)
4. Press OPEN/CLOSE or
to
close the drawer. Loaded
disc position icon lights.

Selecting discs
Press DISC SKIP to skip discs.

Playing discs
Press
to begin or pause
playback, and STOP / to
stop playback.
Press
/
to select a
specific track.

Searching through a CD
Press and hold
/
to search
through a CD while it is playing.

Shuffling play order
Press SHUFFLE to turn on/off
the playing of tracks in random
order.

Press INFO
repeatedly to view
elapsed track time,
track remain time and
disc remain time during
playback.
You may also press PLAY
MODE to select 1 disc or
all discs before activating
INTRO & SHUFFLE
functions.

Sampling tracks
Press INTRO to play the first 10
seconds of each track on the
current disc, all discs in the tray,
or turn INTRO mode off.

You can program the CD player
to play up to any 32 tracks on
the CDs in the tray.
1. While the CD player is
stopped, press PROGRAM
to enter program mode.
The system displays the next
available program number: “- P:01,” with “- -” flashing,
prompts you for the first
track in the program list.
/
to select a track
2. Press
(press DISC SKIP to select a
track from a different disc).
3. Immediately press
PROGRAM to assign
the selected track to the
program number. You are
prompted for the next track
in the program list. (In CD
program mode, PROG icon
will be lit.)

Playing a program List
While in PROGRAM mode, press
.
Displaying the program List
1. While the CD player is
stopped, press PROGRAM to
enter PROGRAM mode.
2. Press PROGRAM repeatedly
to list each track assignment
in the program list.
Deleting program List
While in PROGRAM mode, press
and hold STOP / for 3 seconds.
They unit displays the message
“CLEAR”.

Installing an iPod Dock
Adapter
1. Choose the iPod Dock
Adapter that fits your iPod.
(iPod adaptor is not included)
2. Insert your iPod Dock
Adapter into the dock until
it sits firmly in place.

Removing an iPod
Dock Adapter
Remove the iPod
Dock Adapter as
illustrated.

iPod playback
Listening to your iPod
Insert your iPod into the
connector in the dock. Press
iPod to select iPod mode.
Press
to begin or pause
playback, and STOP/ to
stop playback.
Press
/
to select a
specific song.
Press and hold
/
to
search through a song while
it is playing.
Press MENU to display iPod
menu, press again to return
to previous menu.
to
Press
PRESET
navigate iPod menu lists.
Press SELECT to confirm
iPod menu lists.

Your iPod will be
charged automatically
(until fully charged)
once it is docked.
To prevent interference to
AM signal, please switch off
the iPod while using Radio.

Play mode
Press PLAY MODE to cycle
between 1 Disc, All Discs,
Repeat 1, Repeat 1 Disc, and
Repeat All Discs.

LINE IN / AUX

Radio
Press SOURCE or TUNER on the
remote control to select TUNER.

Selecting tuner band
Press
or
press TUNER on the remote
control to select between AM
and FM radio bands.

Tuning to a station
Press
/
to select
frequencies. Press and hold to
start auto searching for the
next available station.

Preset and tune modes
The tuner can be in either
TUNE or PRESET mode. When in
PRESET mode, the PROG light is
on.

Presetting stations
Manually setting presets
1. Press
/
to access the
desired frequency.
2. Press PROGRAM button.
The most recently accessed

program location will be
displayed.
3. If a different program
location is preferred, press
/
to select to the
desired preset number (1-32).
4. Press PROGRAM store the
selected frequency at that
preset.
Auto preset programming
(FM only)
Press and hold AUTO PROG
AND for 2 seconds to scan
stations in the FM band. The
stations will then be stored as
preset channels. A maximum of
32 stations can be stored.

but the erased stations cannot
be recovered.

Using presets
Press
PRESET
to
access the previous or next
preset station. The display
first shows the preset program
number and after a few
seconds, the frequency will be
displayed. (e.g. P:01 is preset 1)

Suppressing stereo
signal
Press FM ST. to select between
FM mono and stereo for stereo
FM stations.

Connect external audio
sources to your audio
system
Press SOURCE on the unit
repeatedly to select LINE IN or
AUX mode.
Or press LINE IN/AUX on the
remote control to change to LINE
IN mode from CD, TUNER or iPod
mode, press LINE IN/AUX again
to change to AUX mode.
Suggest using Ø3.5mm
LINE IN jack for mp3
player and AUX IN jacks
for auxiliary equipment such
as DVD, VCR or PC.

Beware of your preset channels
being erased accidentally
because the scanning and
storing process is automatic
upon pressing and hold the
button.

Troubleshooting tips
System will not turn on
Check power cord for a
secure connection.
Unplug the unit for a
moment, and then plug into
power source again.
Check the outlet by plugging
in another device.
No sound
Increase the volume setting.
Check connection to
speakers.
Check that you have selected
the appropriate function: CD,
TUNER, iPod, LINE IN/AUX.
Make sure mute is off.
Make sure headphones are
not plugged in.
Poor radio reception
Check antenna connection.
Move antenna.
Turn off nearby electrical
appliances, such as hair
dryer, vacuum cleaner,
microwave, fluorescent
lights.

You can stop the automatic
scan by pressing any button,

Additional information
CD does not play
Check that CD is in the tray.
Check that CD label is facing
up.
Check that PAUSE mode is
not on.
Check that CD function is
selected.
Use CD lens cleaner.
Clean the disc.
Try another CD.
CD sound skips
Clean the disc.
Check disc for warping,
scratches, or other damage.
Check if something is causing
the system to vibrate. If so,
move the system.
Make sure the speakers are
at least 3 feet away or on a
different surface from the
main unit.
CD button will not respond,
or does not change discs
when you press DISC SKIP
Switch to another function

(TUNER, iPod, LINE IN/AUX)
and then back to CD.
Remote control does not work
Check that the batteries are
properly installed.
Replace weak batteries.
Check the system is plugged
into power source.
Point the remote directly at
the system’s front panel.
Move closer to the system.
Remove any obstacles
between the remote and the
system.
iPod does not respond to
the speaker system
Remove your iPod from
the dock and check
for obstruction on the
connectors in the dock and
on your iPod.
Make sure that your iPod
is working properly before
docking into the unit. Please
refer to your iPod manual
for details.

Disconnect the audio system
from the power source before
performing any maintenance.

Cleaning
Clean the exterior of the system
using a soft dust cloth.

CD Player
CAUTION! This system operates
with a laser. It must be opened
by only a qualified technician.

Handling CDs
Do not touch the signal
surfaces. Hold CDs by the
edges, or by one edge
and the hole. Do not affix
labels or adhesive tapes to
the label surfaces. Do not
scratch or damage the label.
CDs rotate at high speeds
inside the player. Do not
use damaged (cracked or
warped) CDs

Cleaning CDs
Dirty CDs can cause poor
sound quality. Always keep

CDs clean by wiping them
gently with a soft cloth
from the inner edge toward
the outer perimeter.
If a CD becomes dirty, wet a
soft cloth in water, wring it
out well, wipe the dirt away
gently, and then remove any
water drops with a dry cloth.
Do not use record cleaning
sprays or antistatic agents
on CDs. Also, never clean
CDs with benzene, thinner,
or other volatile solvents
which may cause damage to
disc surface

CD Lens Care
When your CD lens gets dirty
it can also cause the system to
output poor sound quality. To
clean the lens you will need
to purchase a CD lens cleaner
which can maintain the output
sound quality of your system.
For instructions on cleaning
the CD lens, refer to the ones
accompanying the lens cleaner.

Technical specifications
Power supply: 120V~60Hz
Dimensions ( H x W x D inches):
Unit size - 12 x 11 x 17
Main Speaker - 12.1 x 9.5 x 9
Main unit weight: 13.6 lbs
CD player: Response curve (+/2dB): 60Hz to 15 kHz
Rating Plate: Look for it at the
back of the set.
The descriptions and
characteristics given in this
document are given as a
general indication and not as a
guarantee. In order to provide
the highest quality product
possible, we reserve the right
to make any improvement or
modification without prior
notice. The English version
serves as the final reference on
all products and operational
details should any discrepancies
arise in other languages.

Limited warranty
AVC MULTIMEDIA (“AVC”) makes the following limited warranty.
This limited warranty extend to the original consumer
purchaser and is limited to non-commercial use of the product.
One Year Parts & Labor Warranty
AVC products purchased in the United States are warranted to be
free from defects in materials or workmanship for a period of one
year from the date of their original retail purchase. If the unit fails
to conform to this warranty, we will service the product using new or
refurbished parts and products, at AVC’s sole discretion.
During a period of one year from the effective warranty date, AVC
will provide, when needed, service labor to repair a manufacturing
defect at its designated Service Center. To obtain warranty service
in the Untied States, you must first call our Customer Support
Center at 1-877-252-6873, during the hours
listed in the box on the right. The determination of service will
be made by AVC Customer Support. PLEASE DO NOT RETURN
YOUR UNIT TO AVC WITHOUT PRIOR AUTHORIZATION. New or
remanufactured replacements for defective parts or products will be
used for repairs by AVC at its designated Service Center for one year
from the effective warranty date. Such replacement parts or products
are warranted for an additional one year from the date of repair or
replacement. The Customer will be required to ship the unit to the
Service Center indicated at the time Customer Support is contacted
to make the necessary repairs. The customer is responsible for all
transportation charges to the service facility.

Packaging and Shipping Instruction
When you send the product to the AVC service facility you must use the
original carton box and packing material or an equivalent as designated
by AVC.

LIMITED WARRANTY
Your Responsibility
1) You must retain the original sale receipt to provide proof of
purchase.
2) These warranties are effective only if the product is purchased
and operated in the U.S.A. or Canada.
3) Warranties extend only to defects in material or workmanship,
and do not extend to any product or parts which have been lost
or discarded, or damage to product or parts caused by misuse,
accident, improper operation or maintenance, or use in violation
of instructions provided with the product, or to product which
has been altered or modified without authorization of AVC, or
to products or parts thereof which have had the serial number
removed or changed.

Out of Warranty
In the event your product requires repair after the limited
warranty period has expired, please contact our Customer
Support Center at 1-877-252-6873 or www.RCAav.com
Hours: Monday–Thursday: 9am–7pm, Friday: 9am–5pm,
Saturday: 9am–NOON Eastern time.
Important:
You are responsible for any transportation, shipping or insurance
relative to the return of product to our Product Returns Center.
All warranties implied by state law, including the implied warranties
of merchantability and fitness for a particular purpose, are expressly
limited to the duration of the limited warranties set forth above.
With the exception of any warranties implied by state law as hereby
limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of
manufacturer or seller with respect to the repair or replacement
of any parts. In no event shall AVC be liable for consequential or
incidental damages.
No person, agent, distributor, dealer or company is authorized to
change, modify or extend the terms of these warranties in any
manner whatsoever. The time within action must be commenced to
enforce any obligation of AVC arising under the warranty or under
any statute, or law of the United States or any state thereof, is hereby

limited to one year from the date of purchase. This limitation does
not apply to implied warranties arising under state law.

Important:
Also keep your "Bill of Sale" as proof of purchase.

This warranty gives you specific legal rights and you may also have
other rights, which may vary, from state to state. Some states do not
allow limitation on how long an implied warranty lasts, when an
action may be brought, or the exclusion or limitation of incidental
or consequential damages, so the above provisions may not apply to
you.

Model no. ..............................................................................

For more information on other products and services, please visit our
web site at www.RCAav.com

Product name ...................................................................................
Type of set .................................................................................
Serial no. ..................................................................................
Invoice no. ........................................................................
Date purchased ..........................................................................
Dealer name ..........................................................................
FOR SERVICE AND REPAIR, PLEASE VISIT

www.RCAav.com
Specifications and external appearance are subject to change
without notice.

152-27671-0285
152-27670-0285R1

Printed in China



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2009:03:04 15:58:20+08:00
Create Date                     : 2009:03:04 15:58:20+08:00
Metadata Date                   : 2009:03:04 15:58:20+08:00
Format                          : application/pdf
Document ID                     : uuid:34be63c3-d5c3-4de1-8df6-4e916b1426e7
Instance ID                     : uuid:62b60631-56f4-4dde-a648-95b88fbb9545
Page Count                      : 2

EXIF Metadata provided by EXIF.tools