Reachfar Technology V40 GPS tracker User Manual New features of this electric vehicle alarm
Shenzhen Reachfar Technology Co.,Ltd. GPS tracker New features of this electric vehicle alarm
15_V40 UserMan,r1
Pet GPS tracker
Thanks for choosing the smart GPS trackers produced by
ReachFar Technology Co, Ltd
This operation manual will help you be familiar with the
use of our GPS tracking device. Please read carefully
before use!
Important, please attention :
1. Due to external factors all GPS devices have position
error, the position provided by this device is just for your
reference .
2. There may be delays caused by telecom operators at
certain circumstance. Our company doesn’t assume any
loss caused by the delay．
Main Feature：
WCDMA 3G + GSM +Wifi Global Locating
Waterproof grade IP66
Smart rolling LED light on/off according to
surroundings
WiFi safety zone ,30m indoors accuracy
Tracking via Website / APP/ Wechat / SMS
Trajectory playback / Geo-fence
Voice monitor &Low battery reminders
Accessories：
1* GPS anti-lost host
1* USB Magnetic charging cable
1* Back splint charger
1* User manual
Product View：
Product specification：
2G GSM network：850/900/1800/1900MHz
3G WCDMA network: 1700/2100MHz Or
850/2100MHz
GPRS Standard: Class 12, TCP/IP
GPS locating time：30sec with cold boot (open sky)
29sec with warm boot (open sky)
5sec with hot boot (open sky)
GPS positioning accuracy：10-15m (open sky)
Wifi positioning accuracy: 0-30m (wifi covered area)
Working temperature：-20℃ ~ +45℃
Working humidity：5% ~ 95% RH
Host size：56*60*15mm
Host weight：45g
Battery：700mA
Instructions
Step 1. Prepare for work :
The GPS positioning function of this device request to
choose 3G WCDMA network-based Micro-SIM card
(same as Iphone4) and please be sure the GPRS data
traffic and Caller ID functions have been activated, and
close the PIN code function.
Step 2. Host power on /off :
1. Please insert the Micro-SIM card into the card slot as
directed.
2. Press the POWER key for 3-5sec, then the tracker
lights on.（Blue and Red）
3. In the state of power-on ,press power button for 3
times ,the front blue and red lights fast flash 3 times and
off, then the device shutdown.
Indicator light instructions：
1. GPS indicator and GSM indicator lights：
2. Four smart rolling LED light with tri-colors : when the
environment gets dark, LED flash on automatically.
Wearer’s activity status becomes easier to be observed.
Step 3. APP banding and function setting：
1. Scan the QR code on manual cover or search Reachfar
in iOS store &Google play store to install the APP.
2. Enter the 10-figures ID number on the back of the
device.The original password is “123456”, click log
in,and enter App, as shown in picture above:
Real -time tracking： Show the latest location of the
device: Click update location information to see
relevant information.
Historical route : Display historical route in certain
period of the device: You can check any day in
previous 90 days’ historical route.You can choose
whether to filter out LBS location data.(note:LBS
means the location data indoors, error is large)
Geo-fence : Add ,check or cancel Geo-fence area:
When the device moves into or out of the Geo-fence,
the location platform will send an alert to
App.(Note:we suggest to set the radius of Geo-fence
over 100 meters to
reduce false alerts.)
Wifi-fence：Set 2 WiFi
safe zones,when wearer
leaves safe WiFi
zones,the App will alert
you.
Setting : Set
parameters of the
device(make sure that
the device is
online,otherwise the
command can not be
sent to the device.)as
shown in photo on the
right:
1.About the device :
Check and edit information of the device.
2. Change password：Change log in password of
the website platform and App.
3. Interval for uploading GPS location :
Adjust the time interval of GPS uploading
location.The shorter time interval is, the more
accurate the location is, meanwhile, the standby
time is shorter. We suggest every 10 minutes or
every hour uploading location.If you are tracking
targets,adjust to every 30sec uploading
location,when target found,turn back to 10 minutes
or 1 hour to keep longer standby time.
4.Main monitoring number : The master number
can send command and receive alarm.
5.The white list and phonebook : Only the phone
numbers on white list or phonebook can call the
phone number of the device for monitoring .
6.Sensor lights : When the environment gets dark,
LED light flashes automatically, the wearer will be
easier to be found.(factory setting shut down the
LED lights to save standby time)
7.Time zone of software：This is for APP time ,
users can set it according to local time zone.
8.Device languages: The device’s alarm SMS
languages includes Chinese and English so far.
9.Remote reboot: Power on the device via APP
10.Remote power-off： Power off the device via
APP.( once conduct remote power-off, users will be
not able to remote power-on it. Please be cautious
to use the function.)
Device message: A list shows alert information
sent by the device.
Alarm reminders：Whether receive the pushed
alert information from APP.
Log out : Log out the APP, and never get the alarm
reminders via APP.
For more details of APP and platform functions, please
visit our website: www.rfgsm.net .
SMS commands:
All command should be written in lowercase letters,
without any blank space and end with “#”.
Command for setting master number :
“pw,123456,center,number#”
For example : pw,123456,center,180********#
The tracker will reply : 180******** has been set as the
master number successfully.
Special tip:The setting of other sms comands can be set
only by the master number.(A form of more sms setting
can be found in the end of this manual.)
Remark：
Please use the tracker in the place where network
signal is strong.
The new device needs to be charged for 2 hours before
use.During use of the device, please fully charge and
discharge it at least once every 3 months to avoid
battery life reduction.
Standby time : 1) Upload location data every 10
minutes ,the standby time is 60 hours ,talking time is 4
hours (Actual test)； 2）Turn off APP and web
platform function, the standby time is about 10 days.
Note: Above test data is base on the status of strong
GSM network.
After you insert the SIM card and charge the device,
please put back the rubber plug into the hole, or it will
affect waterproof effect.
This product has waterproof grade IP66, but it is still
not suitable for dipping in the water or being worn
while swimming.
Please do not open the host yourself,or it will affect
the waterproof function and lose the warranty rights.
FAQ :
Q: My GPS tracker can make calls and send messages,
but the APP shows “not enable”
A: There are several reasons as follow:
1. GPRS data plan service hasn’t been activated yet;
2. Turn off GPS tracking
3. Send “dsp#” to check the GPS tracker current GSM
signal, if the GSM signal is not strong, GPRS will be
affected firstly, next is the text, last is the voice
communication.
In brief, the GPRS signal is weak, the situation is like the
one when we can make a call but can not visit a webpage;
4. Please set APN as follows：
1) Set master number first,the SMS command is
“pw,123456,center,your phone number#”
2) Please try to find the apn data from the SIM card’s
official website and then send the SMS command as
follow: “apn,apndata#”
3) If the APN needs user’s name and password, for
example: the user’s name is “cm”, password is “123”,
then the SMS command is “apn,apndate,cm,123,,#”;
4) If you get a reply, then restart the device.
5) If the APP still shows “not enable”, please call the
telecom operator to get the APN data.
P.S: APN reference website: http://wiki.apnchanger.org/
Q: After white list set,voice monitoring is unavailable.
A: If the SOS master number is group cornet number with
the number of GPS device,enter group cornet number
when binding number, and make sure the SIM card of the
device has Caller ID display function.
Q: Device shows online, but it shows“wait for the
device responses”when you set comand with APP.
A: a. Device signal is not strong, result in GPRS data
blocked;
b. Device is busy in talking online.
The SMS command list:
Command
Function
pw,123456,center,n
umber#
Set master number
factory#
Delete all number , restore
factory default
gprsgps,0#
Close gps positioning,only
GSM standby
gprsgps,1#
Open gps positioning(default)
lsn,0#
Close LED Smart rolling
LED light
lsn,1#
Open LED Smart rolling LED
light (default)
lz,0,8#
Change the SMS language to
English, the first digital is for
language,1 is Chinese,0 is
English.the second digital is
for timezone.
url#
Check the location.
reboot#
Remote restart GPS host
apn,apndata,username,
password,plmncode#
Configure the apn setting
Light
color
Function
Slow flash
Fast
flash
Close
Blue -left
2
GPS
indicator
locating
success
sleeping
Red-left
3
GSM
indicator
network
searching
success
sleeping
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types:
GPS trakcer / (FCC ID: 2AJ5OV40) has also been tested against this SAR limit. SAR information
on this and other pad can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/. Please use the
device FCC ID number for search. This device was tested for typical body-worn operations with
device kept 0mm from the body. To maintain compliance with FCC RF exposure requirements,
use accessories that maintain a 0mm separation distance between the user's body and the back of the
handset. The use of belt clips, holsters and similar accessories should not contain metallic components
in its assembly. The use of accessories that do not satisfy these requirements may not comply with
FCC RF exposure requirements, and should be avoided.
FCC Warning
This device complies with Part 15 of the FCC R ules. Operation is subj ect t o the following two
conditions:
(1) This device m ay not cause harmful interfere nce, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to par t 1 5 of the FCC Rules. Th ese limits are des igned to pro vide re asonable
protection against harmful interference in a residential installation. This equipment generates, uses
and c an radia te ra dio fre quency energy and, if not i nstalled a nd us ed in ac cordance wit h the
instructions, may cause h armful interfe rence to ra dio c ommunications. Howe ver, th ere is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful in terference t o rad io or television rece ption, which ca n b e det ermined by turn ing t he
equipment off and on, the user is e ncouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect t he equipment int o a n out let on a circuit dif ferent from that to whic h the re ceiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.