Ready Set Mount Creative Usb Adapter With Bluetooth Technology Cb2436 Users Manual CB2436_CLA_front 3
2015-02-06
: Ready-Set-Mount Ready-Set-Mount-Creative-Usb-Adapter-With-Bluetooth-Technology-Cb2436-Users-Manual-522278 ready-set-mount-creative-usb-adapter-with-bluetooth-technology-cb2436-users-manual-522278 ready-set-mount pdf
Open the PDF directly: View PDF 
.
Page Count: 1
| Download | |
| Open PDF In Browser | View PDF |
4/12/2005 10:27:07 AM About Your Creative USB Adapter CB2436 with Bluetooth® Technology Thank you for choosing the Creative USB Adapter CB2436 with Bluetooth Technology. Your USB adapter is easy to set up and supports wireless transfer rates of up to 1 Mbps*. Your USB adapter adds Bluetooth technology to your computer and can be paired with other Bluetooth-enabled devices. 1 Installing Your USB Adapter Before you install your Creative USB Adapter CB2436 with Bluetooth Technology, take note of the Bluetooth Device Address (BDA) found on a label on your USB adapter. You need them later to verify your Bluetooth installation and pair your Bluetooth devices. Quick Start USB connector Insert this into your computer's USB port. Connect your USB adapter to your computer's USB port as shown below. USB port DO NOT connect the USB adapter to your computer before installing the software. You will be required to do so halfway through the installation. For Windows XP Service Pack 2 only i. Click Start → Settings → Control Panel. ii. Double-click the System icon. iii. When the System Properties dialog box appears, click the Hardware tab. iv. Click the Device Manager button. Turn on your computer and insert the Installation CD into your CD-ROM/DVD-ROM drive. Your CD should start automatically. If it does not, follow the steps below: i) Start Windows® Explorer. ii) On the left pane, click the My Computer icon. iii) Right-click the CD-ROM/DVD-ROM drive icon, and then click Autoplay. v. 2. Follow the instructions on the screen and install the Bluetooth Software. viii. Select Install from a list or specific location (Advanced) and click the Next button. 3. When the Software Installation Wizard dialog box appears, click the Next button. 4. When the License Agreement dialog box appears, select I accept the terms in the license agreement and click the Next button. 1. Light Emitting Diode (LED) Turns on when your USB adapter is successfully installed and connected to your computer. When blinking red, the USB adapter is transferring or receiving data. 9. 230 Creative USB Adapter CB2436_CLA_front 3.ai 5. Follow the instructions on the screen. 6. When the Device Not Found dialog box appears, click the Cancel button. 7. Click the Finish button. 8. When prompted, restart your computer. Double-click Bluetooth Radios. vi. Right-click Blutonium BCM Bluetooth 2.4GHz Single Chip Transceiver and click Update Driver. vii. When the Hardware Update Wizard dialog box appears, select No, not this time and click the Next button. ix. Select Don’t search. I will choose the driver to install and click the Next button. Notebook computer Desktop computer 10. When the Add New Hardware Wizard dialog box appears, select Install the software automatically [Recommended]. x. Select CB2431/CB2436 Creative Bluetooth USB Adapter and click the Next button. xi. Click the Finish button. Your USB adapter should appear under Bluetooth Devices in Device Manager. 11. Click the Next button. 12. In the next dialog box that appears, click the Next button. 13. Click the Finish button to complete the installation. The My Bluetooth Places icon appears on your computer’s desktop and system tray. Your computer's USB port may be located on the front panel. If your USB adapter does not fit into the USB port located on the back panel, connect it to the USB port located on the front panel. * Effective throughput of up to 723 Kbps. Product Registration Your Bluetooth 2 Configuring Device 4 Pairing Your USB Adapter to Other Bluetooth-Enabled Devices 1. On your taskbar, right-click the My Bluetooth Places icon , and select Start Using Bluetooth. The Initial Bluetooth Configuration Wizard dialog box appears. You need to pair your USB adapter for it to work with other Bluetooth-enabled devices. 2. Follow the instructions on the screen to complete the configuration. 3. When you are prompted to install another Bluetooth device, click the Skip button. 4. Click the Finish button. Use the My Bluetooth Places application to pair your USB adapter to Bluetooth-enabled 1. On your taskbar, double-click the My Bluetooth Places icon . Bluetooth is a registered trademark of the Bluetooth SIG, Inc., USA. Windows is a registered trademark of Microsoft Corporation. Information in this document is subject to change without notice and does not represent a commitment on the part of Creative Technology Ltd. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, for any purpose without the written permission of Creative Technology Ltd. The software described in this document is furnished under a license agreement and may be used or copied only in accordance with the terms of the license agreement. It is against the law to copy the software on any other medium except as specifically allowed in the license agreement. The licensee may make one copy of the software for backup purposes. Copyright © 2005 Creative Technology Ltd. All rights reserved. Version 2.0 April 2005. P/N: 235-10238 1. On your taskbar, right-click the Bluetooth icon, and select Advanced Configuration. The Bluetooth Configuration dialog box appears. 2. Click the Hardware tab. The Bluetooth Configuration dialog box appears. 3. In the Device Properties box, check the device status and device address. The device should be indicated as working properly and the device address should match the BDA, found on a label on your USB adapter. 2. Double-click the Find Bluetooth Devices icon. Creative Knowledge Base Resolve and troubleshoot technical queries at Creative's 24-hour self-help Knowledge Base. Go to www.creative.com and select your region. Customer Support Services & Warranty 4. Follow the instructions on the screen. Guide (on CD). Please note that your warranty rights are not dependent on registration. device that you want to pair to. devices. For more information about the My Bluetooth Places application, refer to the User's The My Bluetooth Places window appears. Your Bluetooth 3 Verifying Installation 3. In the Entire Bluetooth Neighborhood dialog box, double-click the Bluetooth-enabled Registering your product ensures you receive the most appropriate service and product support available. You can register your product during installation or at www.creative.com/register. If prompted for a Bluetooth pin code, type the pin code of the Bluetooth-enabled device that you are pairing your USB adapter to. You can find Customer Support Services, Warranty and other information in the Installation CD. Customer Support Services d:\support\\ \support.chm Warranty d:\warranty\ \ \warranty.chm Please keep your Proof of Purchase for the duration of the Warranty period. Regulatory d:\fcc\ \cb2436\doc.chm User's Guide d:\manual\ \cb2436\manual.pdf For Windows XP only: In the Bluetooth Tasks box, click View devices in range. (replace d:\ with the drive letter of your CD-ROM/DVD-ROM drive, with the region you are in, and with the language that the document is in). Keep this document for future reference.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 1 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:b60533d7-b7b1-4daa-aac8-dd31d61f64f6 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:04:12 10:28:08+08:00 Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:04:12 10:28:08+08:00 Document ID : uuid:df9ce15e-382c-41f2-8de3-d7ed1538e0a3 Format : application/pdf Title : Creative USB Adapter CB2436_CLA_front 3.ai Creator : ida_poon Author : ida_poonEXIF Metadata provided by EXIF.tools