Realtek Semiconductor RTL8188SU 802.11b/g/n RTL8188SU Slim module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1261931
Application ID	OjOVpGRVCVuHq87bjzyq4w==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.55kB (206917 bits)
Date Submitted	2010-04-06 00:00:00
Date Available	2010-04-06 00:00:00
Creation Date	2010-04-01 11:51:36
Producing Software	Acrobat Distiller 9.0.0 (Windows)
Document Lastmod	2010-04-02 16:54:32
Document Title	Microsoft Word - RTL8188SU User's manual statement 20100401 _2_
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Shelly

RTL8188SU
802.11b/g/n RTL8188SU Slim module
User’s Manual
Rev. 1.0
23 March 2010
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com.tw
RTL8188SU
User’s Manual
Table of Contents
1.
SPECIFICATIONS .............................................................................................................................................................. 3
2.
PIN ASSIGNMENT ............................................................................................................................................................. 4
3.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMEN .................................................... 5
ii
Rev.1.0
RTL8188SU
User’s Manual
1. Specifications
Rev.1.0
RTL8188SU
User’s Manual
2. Pin Assignment
Rev.1.0
RTL8188SU
User’s Manual
3. Federal Communication Commission Interference
Statemen
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through
11.
IMPORTANT NOTE:
This module is intended for OEM integrator. The OEM integrator is still responsible for the FCC compliance
requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host this
module is integrated into. Under such configuration, the FCC radiation exposure limits set forth for an
population/uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to
Rev.1.0
RTL8188SU
User’s Manual
operate this equipment.
USERS MANUAL OF THE END PRODUCT:
In the users manual of the end product, the end user has to be informed to keep at least 20cm separation with the
antenna while this end product is installed and operated. The end user has to be informed that the FCC
radio-frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also
be informed that any changes or modifications not expressly approved by the manufacturer could void the user's
authority to operate this equipment. If the size of the end product is smaller than 8x10cm, then additional FCC
part 15.19 statement is required to be available in the users manual: This device complies with Part 15 of FCC
rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
LABEL OF THE END PRODUCT:
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: TX2-RTL8188SU
". If the size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be
available on the label: This device complies with Part 15 of FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Rev.1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Title                           : Microsoft Word - RTL8188SU User's manual statement 20100401 _2_
Creator                         : Shelly
Create Date                     : 2010:04:01 11:51:36+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2010:04:02 16:54:32+08:00
Metadata Date                   : 2010:04:02 16:54:32+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:98a71d0a-17ff-40f7-af4e-66a7db05c613
Instance ID                     : uuid:50580c34-911d-44d1-b807-707565a920c1
Page Count                      : 6
Author                          : Shelly

EXIF Metadata provided by EXIF.tools