Realtek Semiconductor RTL8723BS 802.11b/g/n RTL8723BS Combo module User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2267165
Application ID	2F2uDLxW+hcI/5wko2Svdw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	140.6kB (1757502 bits)
Date Submitted	2014-05-14 00:00:00
Date Available	2014-11-11 00:00:00
Creation Date	2017-10-22 21:58:49
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-22 21:58:49
Document Title	User Manual
Document Creator	Microsoft® Word 2010

RTL8723BS
Combo NGFF1216 User’s Manual
Rev. 1.0
20 March 2014
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com.tw
RTL8723BS
Combo NGFF1216 User Manual
COPYRIGHT
©2013 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means without the written permission of Realtek Semiconductor Corp.
DISCLAIMER
Realtek provides this document “as is”, without warranty of any kind, neither expressed nor implied, including,
but not limited to, the particular purpose. Realtek may make improvements and/or changes in this document or
in the product described in this document at any time. This document could include technical inaccuracies or
typographical errors.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are
trademarks/registered trademarks of their respective owners.
USING THIS DOCUMENT
This document is intended for the software engineer’s reference and provides detailed programming
information.
Though every effort has been made to ensure that this document is current and accurate, more information may
have become available subsequent to the production of this guide. In that event, please contact your Realtek
representative for additional information that may help in the development process.
ii
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
Table of Contents
1.
GENERAL DESCRIPTION................................................................................................................................................ 4
1.1. RTL8723BS .................................................................................................................................................................... 4
1.2. ENVIRONMENTAL ............................................................................................................................................................. 4
1.2.1.
Operating ............................................................................................................................................................... 4
1.2.2.
Storage.................................................................................................................................................................... 4
1.3. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................... 4
1.4. WARNING......................................................................................................................................................................... 6
1.4.1 Federal Communication Commission Interference Statement ...................................................................................... 6
1.4.2 Industry Canada Statement .......................................................................................................................................... 7
1.4.3 NCC 警語 ................................................................................................................................................................... 10
1.4.4 Japan Statement ......................................................................................................................................................... 10
List of Tables
TABLE 2. FUNCTIONAL SPECIFICATIONS ......................................................................................................................................... 4
List of Figures
iii
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
1. General Description
1.1. RTL8723BS
The Realtek RTL8723BS is a highly integrated single-chip 802.11n Wireless LAN (WLAN) SDIO network
interface controller with integrated Bluetooth 2.1/3/0/4.0 USB interface controller. It combines a WLAN MAC,
a 1T1R capable WLAN baseband, and RF in s single chip. The RTL8723BS provides a complete solution for
a high-performance integrated wireless and Bluetooth device.
The integration provides better coordination between 802.11 and Bluetooth, and with sophisticated dynamic
power control and packet traffic arbitration, RTL8723BS is able to provide the best coexistence performance.
RTL8723BS also integrates RF/PA/LNA for both 802.11n and Bluetooth so that the number of external
components is reduced to minimum. The 802.11 part supports 150Mbps PHY rate and delivers reliable
throughput from an extended distance.
The Bluetooth part supports latest 3.0+HS/4.0+LE operation and provides smooth user experience under all
usage scenarios. Optimized RF architecture and baseband algorithms provide superb performance and lowest
power consumption.
1.2. Environmental
1.2.1. Operating
Operating Temperature:
Relative Humidity:
0 to 70 C
5-90% (non-condensing)
1.2.2. Storage
Temperature:
Relevant Humidity:
-55 to 125 C
5-95% (non-condensing)
1.3. Functional Specifications
Standards
Bus Interface
Form Factor
Data Rate
Table 1. Functional Specifications
WiFi:
IEEE 802.11b, IEEE 802.11g, Draft IEEE 802.11n, IEEE 802.11d,
IEEE 802.11e, IEEE 802.11h, IEEE 802.11i
BT:
BT v3.0, v4.0
WiFi: SDIO BT: UART
NGFF1216
802.11b:
11, 5.5, 2, 1 Mbps;
802.11g:
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
Media Access Control
Modulation Techniques
Network Architecture
Operating Channel
Frequency Range
Security
Operating Voltage
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 7 for HT20MHz;
MCS 0 to 7 for HT40MHz
BT:
1/2/3 Mbps
WiFi:
CSMA/CA with ACK
WiFi + BT:
AFH, Time Division
802.11b:
CCK, DQPSK, DBPSK
802.11g:
64 QAM, 16 QAM, QPSK, BPSK
802.11n:
BPSK, QPSK, 16-QAM, 64-QAM
BT:
GFSK, /4 DQPSK, 8DPSK
WiFi:
Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
WiFi 2.4GHz:
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
13: (Ch. 1-14) – Japan
BT 2.4GHz:
Ch. 0 ~78
2.400GHz ~ 2.4835 GHz
WiFi :
WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE
802.11x, IEEE 802.11i
BT:
Simple Paring
3.3 V ±9% I/O supply voltage
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
1.4. Warning
1.4.1 Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.
This device is intended only for OEM integrators under the following conditions:
This
device
andmust
its antenna(s)
with anybetween
other transmitters
in accordance
1)
The
antenna
be installedmust
suchnot
thatbe20co-located
cm is maintained
the antennaexcept
and users,
and
with
FCC
multi-transmitter
product
procedures.
2) The transmitter module may not be co-located with any other transmitter or antenna,
Refering
to the multi-transmitter
policy,
andinmodule(s)
canfor
be2.4G
operated
3)
For all products
market in US, OEM
has tomultiple-transmitter(s)
limit the operation channels
CH1 to CH11
band by supplied
firmware
programming
tool.
OEM
shall
not
supply
any
tool
or
info
to
the
end-user
regarding
to
Regulatory
Domain
simultaneously without C2P.
change.
This
module
is intendedabove
for OEM
integrator.
The OEM integrator
responsible
for the compliance
As
long
as 3 conditions
are met,
further transmitter
test will notisbe
required. However,
the OEM to
all the rules
that responsible
apply to thefor
product
this certified
module compliance
is integrated.
integrator
is still
testinginto
theirwhich
end-product
for anyRF
additional
requirements required
Additional
testing
and certification
maydigital
be necessary
when multiple
modulesrequirements,
are used.
with
this module
installed
(for example,
device emissions,
PC peripheral
etc.).
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
USERS MANUAL
OF THE ENDwith
PRODUCT:
configurations
or co-location
another transmitter), then the FCC authorization is no longer considered
In theand
usersthe
manual
endnot
product,
the end
userfinal
has toproduct.
be informed
to keep
at least 20cm separation
with
the antenna
while
valid
FCCofIDthecan
be used
on the
In these
circumstances,
the OEM
integrator
will
be
this end product
installed and operated.
end user
has to bethe
informed
that the FCC
radio-frequency
exposure
guidelines for
responsible
for isre-evaluating
the end The
product
(including
transmitter)
and obtaining
a separate
FCC
an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not
authorization.
expressly approved by the manufacturer could void the user's authority to operate this equipment. If the size of the end product
is smaller
than 8x10cm,
then additional FCC part 15.19 statement is required to be available in the users manual: This device
End
Product
Labeling
complies
with
Part
15
of
FCC
rules. Operation
subject
to device
the following
(1) this
maysuch
not cause
harmful
This transmitter module
is authorized
onlyisfor
use in
wheretwo
theconditions:
antenna may
be device
installed
that 20
cm
interference
and
(2)
this
device
must
accept
any
interference
received,
including
interference
that
may
cause
undesired
may be maintained between the antenna and users. The final end product must be labeled in a visible area with
operation.
the following: “Contains FCC ID: TX2-RTL8723BS”.
LABEL OF THE END PRODUCT:
Manual Information To the End User
The final end product must be labeled in a visible area with the following " Contains TX FCC ID: TX2-RTL8723BS ". If the
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
size of the end product is larger than 8x10cm, then the following FCC part 15.19 statement has to also be available on the label:
remove
this RF module in the user’s manual of the end product which integrates this module.
This device complies with Part 15 of FCC rules. Operation is subject to the following two conditions: (1) this device may not
The
end
user manual shall include all required regulatory information/warning as show in this manual.
cause harmful interference and (2) this device must accept any interference received, including interference that may cause
undesired operation.
1.4.2 Industry Canada Statement
This
device
complies
withwith
Industry
Canada
RSS standard(s).
Operation
is subject
following
This
device
complies
RSS-210
of license-exempt
the Industry Canada
Rules. Operation
is subject
to to
thethe
following
two conditions:
conditions:
two
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of the
device
French translation:
Ce dispositif
dispositifest
estconforme
conformeaux
à laCNR
norme
CNR-210
d'Industrie
Canada
applicable
auxexempts
appareils
Ce
d'Industrie
Canada
applicable
aux appareils
radio
de radio exempts de
licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de
brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
This device has been designed to operate with an antenna having a maximum gain of 3.5dBi.
Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required
antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
EIRP is not more than required for successful communication.
French translation:
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 3.5 dBi. Une antenne à
gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne requise
est de 50 ohms.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans le
but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le type
d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
nécessaire àl'établissement d'une communication satisfaisante.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
French translation:
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non
contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de
rayonnement et votre corps.
This device is intended only for OEM integrators under the following conditions:
For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
other channels is not possible.
2)
Theles
transmitter
mayaux
not États-Unis
be co-located
with any
transmitter
antenna,
Pour
produits module
disponibles
/ Canada
duother
marché,
seul le or
canal
1 à 11 peuvent être
exploités.
Sélection
d'autres
canaux OEM
n'est pas
3)
For all products
market
in Canada,
haspossible.
to limit the operation channels in CH1 to CH11 for 2.4G band
by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to
Regulatory Domain change.
This
device
and its antenna(s)
must
be co-located
except inthe OEM
As
long
as 3 conditions
above are
met,not
further
transmitterwith
testany
willother
not betransmitters
required. However,
integrator
is still
for testing their
end-product
for any additional compliance requirements required
accordance
withresponsible
IC multi-transmitter
product
procedures.
with
this module
installed.
Refering
to the multi-transmitter
policy, multiple-transmitter(s) and module(s) can be operated
simultaneously without reassessment permissive change.
Cet appareil
et son: antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec
French
translation
une autre antenne ou transmetteur.
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour utilisation de
dispositif module)
This module is intended for OEM integrator. The OEM integrator is still responsible for the IC
compliance requirement of the end product, which integrates this module.
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les
utilisateurs, et
2) Le module émetteur peut ne pas être coïmplanté avec un autre émetteur ou antenne,
3) Pour tous les produits vendus au Canada, OEM doit limiter les fréquences de fonctionnement CH1 à CH11
pour bandes de fréquences 2.4G grâce aux outils de microprogrammation fournis. OEM ne doit pas fournir
d'outil ou d'informations à l'utilisateur final en ce qui concerne le changement de réglementation de domaine.
Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas
nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour toutes
exigences de conformité supplémentaires requis pour ce module installé.
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the IC authorization is no longer considered valid
USERS
OFused
THE
PRODUCT:
and
the IC MANUAL
ID can not be
onEND
the final
product. In these circumstances, the OEM integrator will be
In the users
of the the
endend
product,
the(including
end user the
hastransmitter)
to be informed
keep at aleast
20cmIC
responsible
for manual
re-evaluating
product
and to
obtaining
separate
authorization.
separation with the antenna while this end product is installed and operated. The end user has to be
informed
that the IC radio-frequency exposure guidelines for an uncontrolled environment can be
French
translation:
satisfied. The end user has to also be informed that any changes or modifications not expressly
NOTE IMPORTANTE:
approved
byces
theconditions
manufacturer
could être
voidsatisfaites
the user's(par
authority
to pour
operate
this equipment.
Operation
is
Dans
le cas où
ne peuvent
exemple
certaines
configurations
d'ordinateur
subjectoutode
thecertaines
following
two conditions:
may not
cause harmful
interference
andconsidéré
(2)
portable
co-localisation
avec(1)
un this
autredevice
émetteur),
l'autorisation
du Canada
n'est plus
this device
received,
including
interference
that may cause
undesired OEM
comme
validemust
et l'IDaccept
IC neany
peutinterference
pas être utilisé
sur le produit
final.
Dans ces circonstances,
l'intégrateur
sera
chargé
de
réévaluer
le
produit
final
(y
compris
l'émetteur)
et
l'obtention
d'une
autorisation
distincte au
operation.
Canada.
LABEL OF THE END PRODUCT:
TheProduct
final end
product must be labeled in a visible area with the following " Contains TX IC :
End
Labeling
6317A-RTL8723BS ".
This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm
may be maintained between the antenna and users. The final end product must be labeled in a visible area with
radio transmitter
(identify
the device by certification number, or model number if Category II)
theThis
following:
“Contains IC:
6317A-RTL8723BS”.
has been approved by Industry Canada to operate with the antenna types listed below with the
French translation:
maximum permissible gain and required antenna impedance for each antenna type indicated.
Plaque
signalétique
produit final
Antenna
types notduincluded
in this list, having a gain greater than the maximum gain indicated for
Cethat
module
émetteur
est
autorisé
uniquement
pour
une
utilisation dans un dispositif où l'antenne peut être
type, are strictly prohibited
for use with
this
device.
installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de
final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC:
modèle s'il fait partie
6317A-RTL8723BS
". du matériel de catégorie I) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou
Manual
To The
dont leInformation
gain est supérieur
au End
gain User
maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
The
OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
French translation:
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon
d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements
comme indiqué dans ce manuel.
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
1.4.3 NCC 警語
經型式認證合格之低功率射頻電機，非經許可，公司
率或變更原設計之特性及功能
商號或使用者均不得擅自變更頻率
加大功
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並
改善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線電通信 低功率射頻電
機須忍受合法通信或工業 科學及醫療用電波輻射性電機設備之干擾
本模組於取得認證後將依規定於模組本體標示審合格籤
系統廠商應於平台上標示
本產品內含射頻模組：
XXXyyyLPDzzzz-x (NCC ID)
字樣
1.4.4 Japan Statement
Host system must be labeled with "Contains MIC ID:xxxxxx“, MIC ID displayed on label
Installing the Wireless NGFF1216 module Hardware
Step 1. Shut down the computer.
Step 2. Mount the NGFF1216 module on motherboard by soldering.
10
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
Step 3. Connect external Wi-Fi/BT antenna to corresponding RF connector.
Step 4. Power on the computer.
Un-installing the Wireless NGFF1216 module
Hardware
Step 1. Shut down the computer.
Step 2. Remove external Wi-Fi/BT antenna from the wireless NGFF1216 module board.
Step 3. Unmount the NGFF1216 module from motherboard by soldering.
Installing the Wireless SDIO module Software
Before you proceed with the installation, please notice following descriptions.
Note1: The following installation was operated under Windows XP.
(Procedures are similar for Windows 98SE/Me/2000.)
Note2: If you have installed the WLAN driver & utility before, please
uninstall the old version first.
If you install the “Realtek11n Single Chip SDIO WLAN NIC Mass production kit” into your laptop computer
11
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
before installing the software program from
the CD.
A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup”
program.
B. Click “Next” to process the installation
C. The system starts to install the software of the WLAN adapter.
12
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
D. The system will automatically detect the card and display “Hardware
Installation” screen. Click “繼續安裝” to continue.
E. Please click “Finish” to complete the installation.
13
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
14
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
Un-installing the Wireless SDIO module Software
If you install Realtek11n Single Chip SDIO WLAN NIC Mass production kit into your laptop computer after
installing the software program from the CD.
When you install Realtek11n Single Chip WLAN SDIO MINICARD Adapter,
the following dialog will be shown.
A. Uninstall the RTL8723BS WLAN Driver from “Start”→ “All Programs”→
“Realtek11n Single Chip WLAN SDIO NIC Mass production kit” or “Control
Panel”“”→“Change or Remove Programs”.
Please click “Un-install” (or “Change/Remove”) to remove RTL8723BS
WLAN driver.
B. Please click “Finish” to complete the un-installation
15
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
Installing the Bluetooth Module
Software
A. Connect the USB-to-RS232 adapter to computer.
B. Choose the right COM port and baud rate setting from the BT test UI, then press the OK button below.
16
Rev.1.0
RTL8723BS
Combo NGFF1216 User Manual
C. The driver will be installed successfully as shown below.
Realtek Semiconductor Corp.
Headquarters
No. 2, Innovation Road II, Hsinchu Science Park,
Hsinchu, 300, Taiwan, R.O.C.
Tel: 886-3-5780211 Fax: 886-3-5776047
www.realtek.com.tw
17
Rev.1.0
Table for Filed Antenna
Ant.
Con.
Peak Gain
Type
Type
(dBi)
LYNwave
PIFA
IPEX MHF4
FVC
PIFA
IPEX
FVC
PIFA
IPEX
FVC
PIFA
IPEX
FVC
PIFA
IPEX
FVC
PIFA
IPEX
FVC
PIFA
IPEX
FVC
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
No.
Brand
10
11
12
13
14
15
16
17
18
19
ACON
JEM
WGT
Yageo
WGT
WGT
WGT
WGT
WGT
WGT
WGT
TX1: 3.5
TX1: 1.58
TX2: 1.75
TX1: 2.7
TX2: 2.19
TX1: 1.51
TX2: 2.04
TX1: 2.53
TX2: 2.28
TX1: 2.85
TX2: 1.59
TX1: 3.00
TX2: 1.52
Model No.
TX1: ALA110-222050-300011
K05007012102
K05007013402
K05007012803
K05007015501
K05007014501
K05007014201
TX1: 1.85
TX1: K05007014901
TX2: 1.94
TX2: K05007015001
TX1: -0.57
TX1: APP6P-700900
TX2: -1.61
TX2: APP6P-700900
TX1: 2.23
1510-0122-0022(IA-120073)
TX2: 2.21
TX1: 3.2
TX1: SKX51WMPB01+C
TX2 :2.76
TX2: SKX51WMPB02+C
TX1: 0.24
TX1: ANTA0ZP08021WLAN1
TX2: 0.59
TX2: ANTA0ZP08021WLAN2
TX1: 1.79
TX1: SK 81WMPB01+A
TX2: 0.66
TX2: SK 81WMPB02+A
TX1: 1.36
TX2: 2.88
TX1: 1.85
TX2: 3.14
SKW2UWMPB01+A
SKW31WMPB01+A
TX1: -1.84
TX1: SKM11WMPB03+A
TX2: -2.93
TX2: SKM11WMPB02+D
TX1: 2.46
TX2: 2.91
TX1: 1.25
TX2: 3.17
SKC45WMPB03+B
SKW24WMPB01+B
TX1: 0.76
TX1: SK555WMPB01+B
TX2: 0.09
TX2: SK555WMPB02+B
Page No.: C2 of C14
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
ACON
HONGLIN
Amphenol
Amphenol
Luxshare-ICT
Luxshare-ICT
Amphenol
Luxshare-ICT
Amphenol
Luxshare-ICT
Amphenol
Amphenol
Luxshare-ICT
Luxshare-ICT
Amphenol
Luxshare-ICT
HIGH-TEK
JESS-LINK
YAGEO
ACON
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 1.94
TX1: DQ60APP6P81
TX2: 1.40
TX2: DQ60APP6P80
TX1: -0.50
TX1: DQ602352300
TX2: -0.19
TX2: DQ602352200
TX1: 1.82
TX1: DC330016100
TX2: 2.64
TX2: DC330016110
TX1: -0.35
TX1: DC330016180
TX2: 0.59
TX2: DC330016190
TX1: -0.07
TX1: DC330015Z80
TX2: 0.32
TX2: DC330015Z90
TX1: -1.45
TX1: DC330015Z00
TX2: -0.37
TX2: DC330015Z10
TX1: 1.64
TX1: DC330016160
TX2: 1.47
TX2: DC330016170
TX1: -0.38
TX1: DC330015Z60
TX2: -0.60
TX2: DC330015Z70
TX1: 1.67
TX1: DC3300161A0
TX2: 2.26
TX2: DC3300161B0
TX1: 1.1
TX1: DC330015ZA0
TX2: 0.1
TX2: DC330015ZB0
TX1: -0.22
TX1: DC330016200
TX2: -1.73
TX2: DC330016210
TX1: -2.62
TX1: DC330016220
TX2: -0.70
TX2: DC330016230
TX1: -0.94
TX1: DC330016020
TX2: -1.11
TX2: DC330016030
TX1: -4.49
TX1: DC330016000
TX2: -1.68
TX2: DC330016010
TX1: -0.46
TX1: DC330016260
TX2: -0.98
TX2: DC330016270
TX1: -0.43
TX1: DC330016060
TX2: 0.84
TX2: DC330016070
TX1: -0.69
TX1: DC33001C100
TX2: -0.61
TX2: DC33001C100
TX1: -1.90
TX1: DC33001AX00
TX2: -0.98
TX2: DC33001AX00
TX1: -0.27
TX1: 25.90AH8.021
TX2: -0.88
TX2: 25.90AH7.021
TX1: 0.96
TX1: ATP6P-700000
TX2: 1.33
TX2: ATP6P-700001
Page No.: C3 of C14
40
41
ACON
ACON
PIFA
IPEX
PIFA
IPEX
43
44
45
46
47
PIFA
ACON
WNC
Luxshared
TE
WNC
TX1: APP6P-700853
TX2: 2.20
TX2: APP6P-700854
TX1: 1.20
TX2: 0.11
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 0.24
TX1: 25.90AH8.001
TX2: -0.58
TX2: 25.90AH7.001
TX1: -0.84
TX2: -1.60
TX1: 0.20
TX2: -0.60
49
50
51
52
53
54
55
PIFA
WGT
WGT
WGT
WGT
WNC
WNC
WNC
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
APP6P-700932
81EAAS15.G01 (DC33001EK00)
TX1: -0.77
L01RF035-DT-R
TX1: -0.63
TX1: 25.90AC4.011
TX2: -1.69
TX2: 25.90AC3.011
TX1: 1.19
TX1: 25.90AC4.001
TX2: -0.14
TX2: 25.90AC3.001
WGT
48
APP6P-700931
IPEX
WNC
42
TX1: 1.92
TX1: 1.05
TX2: -0.41
TX1: SK110WMPB01+A
TX2: SK110WMPB02+A
TX1: -1.61
TX1: SKW23WMPB01+A
TX2: -2.84
TX2: SKW23WMPB02+A
TX1: -0.66
TX1: SK547WMPB01+A
TX2: 0.78
TX2: SK549WMPB02+A
TX1: -0.93
TX1: SK740WMPB01+A
TX2: 0.20
TX2: SK740WMPB02+A
TX1: 3.03
TX1: SK840WMPB01+B_SN
TX2: 0.55
TX2: SK840WMPB01+B_SN
TX1: -0.26
TX1: 81EAAS15.G02
TX2: -0.67
TX2: 81EAAS15.G02
TX1: 0.89
TX2: 0.14
DC33001EK40 (81EAAS15.G05)
TX1: -0.06
TX1: 81.EL415.G28.X01
TX2: 0.25
TX2: 81.EL415.G29.X01
Page No.: C4 of C14
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
TONGDA
TONGDA
TONGDA
WGT
WGT
INPAQ
Smart­Approach
WNC
WNC
ACON
ACON
JEM
JEM
JEM
WGT
WGT
WGT
ACON
ACON
ACON
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: -0.57
TX1: T-543-900100-12
TX2: 0.14
TX2: T-543-900100-12
TX1: -1.96
TX1: DC33001F300 / T-543-900100-02
TX2: 0.11
TX2: DC33001F300 / T-543-900100-02
TX1: -0.37
TX1: T-543-900100-01
TX2: 0.39
TX2: T-543-900100-01
TX1: 0.46
TX1: SKCZTWMPB01+A
TX2: -0.79
TX2: SKCZTWMPB02+A
TX1: 1.48
TX1: SK670WMPB01+A
TX2: 1.15
TX2: SK670WMPB02+A
TX1: -3.66
TX1: WA­P­LB­02­082
TX2: -1.78
TX2: WA­P­LB­01­046
TX1: -4.42
TX1: SE­ECZA0­001
TX2: -4.71
TX2: SE­ECZA0­002
TX1: 0.26
TX1: 81EAAS15.G13
TX2: -0.65
TX2: 81EAAS15.G14
TX1: 0.01
TX1: 81EAAS15.G09
TX2: -0.36
TX2: 81EAAS15.G10
TX1: 1.84
TX1: APP6P-700917
TX2: 1.05
TX2: APP6P-700918
TX1: 0.17
TX1: APP6P-700915
TX2: -1.20
TX2: APP6P-700916
TX1: 2.13
TX1: IA 120278
TX2: 2.04
TX2: IA 120279
TX1: 2.06
TX2: 2.77
TX1: 1.60
TX2: 2.93
IA-120007
IA-120007
TX1: 0.76
TX1: SK94SWMPB01+B
TX2: 0.46
TX2: SK94SWMPB01+B
TX1: 1.32
TX1: SK94TWMPB01+B
TX2: 1.86
TX2: SK94TWMPB01+B
TX1: -0.03
TX1: SK50SWMPB01+A
TX2: -0.13
TX2: SK50SWMPB02+A
TX1: 0.84
TX1: APM8P-700072
TX2: -0.27
TX2: APM8P-700073
TX1: 0.76
TX1: APP8P-700461
TX2: -0.52
TX2: APP8P-700462
TX1: 1.74
TX1: APM8P-700070
TX2: 1.01
TX2: APM8P-700071
Page No.: C5 of C14
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
ACON
HongLin
WNC
ACON
HongLin
HongLin
HongLin
HongLin
HongLin
Smart Approach
Smart Approach
Smart Approach
Smart Approach
WNC
WNC
WNC
WNC
JEM
JEM
JEM
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 2.92
TX1: APP8P-700463
TX2: 0.06
TX2: APP8P-700464
TX1: -0.8
TX1: 260-24018
TX2: 0.72
TX2: 260-24017
TX1: -0.85
TX1: DC33001CA20 (81.EK515.G52)
TX2: -0.51
TX2: DC33001CA30 (81.EK515.G53)
TX1: 0.82
TX1: APP8P-700473
TX2: 2.07
TX2: APP8P-700474
TX1: 1.88
TX1: 260-24016
TX2: 1.31
TX2: 260-24015
TX1: 0.87
TX1: 260-24011
TX2: -0.53
TX2: 260-24010
TX1: 0.34
TX1: 260-24013
TX2: 1.98
TX2: 260-24012
TX1: 1.92
TX1: 260-24001
TX2: -0.14
TX2: 260-24000
TX1: 1.85
TX1: 260-24003
TX2: 0.94
TX2: 260-24002
TX1: 0.37
TX1: SE-ECWGP-001
TX2: 1.35
TX2: SE-ECWGP-002
TX1: 0.08
TX1: SE-ECLG2-001
TX2: 1.33
TX2: SE-ECLG2-002
TX1: 1.19
TX1: SE-ECWGR-001
TX2: 1.54
TX2: SE-ECWGR-002
TX1: -0.04
TX1: SE-ECLG1-001
TX2: 1.10
TX2: SE-ECLG1-002
TX1: 0.45
TX1: 81.EK515.G36
TX2: 1.06
TX2: 81.EK515.G37
TX1: -0.90
TX1: DC33001CA00 (81.EK515.G46)
TX2: -2.06
TX2: DC33001CA10 (81.EK515.G47)
TX1: 0.77
TX1: 81.EK515.G38
TX2: 0.11
TX2: 81.EK515.G39
TX1: -0.20
TX1: DC33001CC00 (81.EK515.G48)
TX2: -1.54
TX2: DC33001CC10 (81.EK515.G49)
TX1: 2.77
TX1: IA-130306
TX2: 3.13
TX2: IA-130307
TX1: 2.09
TX1: IA-130082
TX2: 1.77
TX2: IA-130083
TX1: 1.68
TX1: IA-130086 (13B130-FT2070)
TX2: 1.52
TX2: IA-130087 (13B130-FT2071)
Page No.: C6 of C14
96
JEM
PIFA
IPEX
TX1: 2.13
TX1: IA-130086 (13B130-FT2070)
TX2: 1.85
TX2: IA-130087 (13B130-FT2071)
TX1: EGTZ2WIPB01+A
WGT
97
PIFA
IPEX
TX1: 2.81
(13B130-JV3051 ES)
TX2: 1.92
TX2: EGTZ2WIPB02+A
(13B130-JV3050 ES)
TX1: EGS45WIPB02+A
WGT
98
PIFA
IPEX
TX1: 2.5
(13B130-FT2050)
TX2: 1.65
TX2: EGS45WIPB01+A
(13B130-FT2051)
TX1: EGS45WIPB02+A
WGT
99
PIFA
IPEX
TX1: -3.11
(13B130-FT2050)
TX2: 1.46
TX2: EGS45WIPB01+A
(13B130-FT2051)
100
101
102
103
104
105
106
107
108
109
110
111
112
Luxshare
Luxshare
Luxshare
Luxshare
Luxshare
JEM
JEM
JEM
JEM
Smart Approach
Smart Approach
Yageo
Smart Approach
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: -1.45
TX1: L01RF024-YT-R
TX2: 0.11
TX2: L01RF032-YT-R
TX1: 2.51
TX1: L01RF031-DT-R
TX2: 0.14
TX2: L01RF013-R
TX1: 2.51
TX1: L01RF031-DT-R
TX2: -0.14
TX2: L01RF014-R
TX1: 2.51
TX1: L01RF031-DT-R
TX2: -0.04
TX2: L01RF022-DT-R
TX1: 2.51
TX1: L01RF031-DT-R
TX2: 2.51
TX2: L01RF031-DT-R
TX1: 2.64
TX1: IA-130096
TX2: -0.19
TX2: IA-130096
TX1: 2.03
TX1: IA-130173
TX2: -1.19
TX2: IA-130173
TX1: 1.05
TX1: IA-130313
TX2: -1.60
TX2: IA-130313
TX1: 2.57
TX1: IA-130314
TX2: 1.55
TX2: IA-130314
TX1: -0.27
TX1: SE-ECWU6-001
TX2: 0.85
TX2: SE-ECWU6-001
TX1: 0.22
TX1: SE-ECWF5-001
TX2: 0.94
TX2: SE-ECWF5-001
TX1: -0.12
TX1: CAN4313NC0753LLB1
TX2: -1.03
TX2: CAN4313NC0753LLB1
TX1: -0.57
TX1: SE-ECWF5-002
TX2: 1.13
TX2: SE-ECWF5-002
Page No.: C7 of C14
113
114
115
116
117
118
Yageo
Hong-Lin
ACON
ACON
WNC
WNC
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
ACON
119
120
121
122
123
124
125
126
127
128
129
130
131
132
PIFA
INNOWAVE
ACON
INNOWAVE
Foxconn
WGT
HONGLIN
TONGDA
INPAQ
Smart-Approach
Auden
INPAQ
JEM
JEM
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 1.13
TX1: CAN4313NC0753LLB2
TX2: -0.03
TX2: CAN4313NC0753LLB2
TX1: 2.85
TX1: 260-23557
TX2: 0.43
TX2: 260-23556
TX1: 0.17
TX1: APP6Y-700000
TX2: -1.20
TX2: APP6Y-700001
TX1: 1.84
TX1: APP6Y-700002
TX2: 1.05
TX2: APP6Y-700003
TX1: 0.01
TX1: 81EAAS15.G19
TX2: -0.36
TX2: 81EAAS15.G20
TX1: 0.26
TX1: 81EAAS15.G17
TX2: -0.65
TX2: 81EAAS15.G18
TX1: 0.32
TX2: 0.53
TX1: 25.90ALM.001
(AMM8P-700026)
TX2: 25.90ALN.001 (AMM8P-700027)
TX1: 0.77
TX1: 25.90ALO.001 (640-INNEP0008-A)
TX2: -0.62
TX2: 25.90ALP.001 (640-INNEP0007-A)
TX1: 1.73
TX1: AMM6P-700025 (25.90AL4.001)
TX2: 1.47
TX2: AMM6P-700026 (25.90AL5.001)
TX1: 0.54
TX1: 25.90AL7.001 (640-INNEP0005-A)
TX2: 1.79
TX2: 25.90AL8.001 (640-INNEP0006-A)
TX1: -4.13
TX1: DQ608300300
TX2: -2.85
TX2: DQ608300300
TX1: 1.32
TX1: SK94TWMPB01+D
TX2: 1.86
TX2: SK94TWMPB01+D
TX1: 0.64
TX1: 260-24032
TX2: 2.01
TX2: 260-24031
TX1: 1.95
TX1: DC33001GR00 / T-543-9021004-1
TX2: 0.96
TX2: DC33001GR10 / T-543-9021004-2
TX1: -3.18
TX1: WA-P-LB-02-088
TX2: -0.93
TX2: WA-P-LB-01-049
TX1: -0.23
TX1: SE-ECSA0-001
TX2: -2.93
TX2: SE-ECSA0-002
TX1: -0.02
TX1: BAUK01063-WIFI-L
TX2: 2.03
TX2: BAUK01063-WIFI-R
TX1: -0.11
TX1: WA-P-LB-10-015-L
TX2: 1.00
TX2: WA-P-LB-10-015-R
TX1: 0.08
TX1: IA-130361
TX2: 1.07
TX2: IA-130362
TX1: 2.63
TX1: IA-130157 (13B130-FU4070)
Page No.: C8 of C14
TX2: 0.19
TX1: EGC10WIPB01+A
WGT
133
TX2: IA-130158 (13B130-FU4071)
PIFA
IPEX
TX1: 2.82
(13B130-FS8050)
TX2: 1.57
TX2: EGC10WIPB02+A
(13B130-FS8051)
TX1: EG10MWIPB01+A
WGT
134
PIFA
IPEX
TX1: 3.38
(13B130-FU4051 ES)
TX2: 3.28
TX2: EG10MWIPB02+A
(13B130-FU4050 ES)
135
136
WNC
ACON
PIFA
IPEX
PIFA
IPEX
TX1: 2.75
TX1: 81.EEW.15.GAF (25.90AEM.001)
TX2: 1.79
TX2: 81.EEW.15.GAG (25.90AEN.001)
TX1: -0.21
TX1: AMM6P-700041 (025.9001G.0001)
TX2: -0.82
TX2: AMM8P-700031 (025.9001H.0001)
TX1: 640-INNEP0036-A
INNOWAVE
137
PIFA
IPEX
TX1: 1.58
(025.9001I.0001)
TX2: 0.51
TX2: 640-INNEP0037-A
(025.9001J.0001)
138
139
140
141
142
143
144
145
146
147
148
149
LUXSHARE
Speed
LUXSHARE
Speed
WNC
TONGDA
ACON
Smart Approach
HONGLIN
Speed
WNC
WNC
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 1.27
TX1: DC330017L00
TX2: -0.1
TX2: DC330017L10
TX1: 0.23
TX1: DC330017G00
TX2: 1.25
TX2: DC330017G10
TX1: 1.60
TX1: DC330017M00
TX2: 0.84
TX2: DC330017M10
TX1: 1.87
TX1: DC330017J00
TX2: 2.85
TX2: DC330017J10
TX1: 1.55
TX1: 81.EKU15.G59
TX2: 0.76
TX2: 81.EKU15.G60
TX1: -0.23
TX1: T-543-9021015-1
TX2: 0.83
TX2: T-543-9021015-2
TX1: -0.7
TX1: APP6Y-700015
TX2: -1.85
TX2: APP6Y-700016
TX1: 1.33
TX1: SE-ECB14-001
TX2: 1.13
TX2: SE-ECB14-002
TX1: -1.15
TX1: 260-24034
TX2: 0.42
TX2: 260-24033
TX1: -0.09
TX1: F.0G.FH-6004-001
TX2: -2.17
TX2: F.0G.FH-6004-002
TX1: 1.91
TX1: 81.EKU15.G61
TX2: 1.72
TX2: 81.EKU15.G62
TX1: 0.49
TX1: 81.EKU15.G55
Page No.: C9 of C14
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
TONGDA
Smart approach
ACON
HONGLIN
Speed
WNC
WNC
TONGDA
Smart approach
ACON
HIGH-TEK
Smart approach
Smart approach
TONGDA
HIGH-TEK
Zhan yun
Zhan yun
VSO
Hong-Lin
HIGH-TEK
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX2: 1.30
TX2: 81.EKU15.G56
TX1: 1.86
TX1: T-543-9021017-1
TX2: -0.25
TX2: T-543-9021017-2
TX1: 0.19
TX1: SE-ECB15-001
TX2: 0.75
TX2: SE-ECB15-002
TX1: 0.47
TX1: APP6Y-700021
TX2: 1
TX2: APP6Y-700022
TX1: 0.53
TX1: 260-24036
TX2: 1.75
TX2: 260-24035
TX1: -0.96
TX1: F.0G.FH-6005-001
TX2: -0.32
TX2: F.0G.FH-6005-002
TX1: 1.91
TX1: 81.EKU15.G57
TX2: 1.97
TX2: 81.EKU15.G58
TX1: 1.94
TX1: 81.EKU15.G53
TX2: 0.62
TX2: 81.EKU15.G54
TX1: 1.95
TX1: T-543-9021010-1
TX2: 0.36
TX2: T-543-9021010-2
TX1: 0.30
TX1: SE-ECWE0-001
TX2: 1.02
TX2: SE-ECWE0-002
TX1: 0.27
TX1: APP6Y-700019
TX2: 1.34
TX2: APP6Y-700020
TX1: 1.19
TX1: 0ACCN013035N
TX2: 0.3
TX2: 0ACCN013035N
TX1: 0.61
TX1: SE-ECVY1-001
TX2: 1.29
TX2: SE-ECVY1-001
TX1: 1.80
TX1: SE-ECVY2-001
TX2: -3.13
TX2: SE-ECVY2-001
TX1: 1.98
TX1: T-543-9021012-A
TX2: 1.85
TX2: T-543-9021012-A
TX1: -0.07
TX1: 0ACCN013036
TX2: -1.81
TX2: 0ACCN013036
TX1: 1.16
TX1: QTFF6-EQL0202A
TX2: 1.31
TX2: QTFF6-EQL0202A
TX1: 0.34
TX1: QTFF6-EQL0102A
TX2: 0.56
TX2: QTFF6-EQL0102A
TX1: 2.07
TX1: 821-101-01211090
TX2: 0.39
TX2: 821-101-01211100
TX1: 2.85
TX1: 260-23557
TX2: 0.43
TX2: 260-23556
TX1: -0.87
TX1: 025.9002N.0011
Page No.: C10 of C14
170
171
172
173
174
175
176
177
178
WNC
HIGH-TEK
WNC
INNOWAVE
WNC
WGT
TONGDA
Foxconn
Yageo
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX2: 0.77
TX2: 025.9002M.0011
TX1: 0.33
TX1: 025.9002N.0001
TX2: 1.03
TX2: 025.9002M.0001
TX1: -0.6
TX1: 025.90027.0011
TX2: -1.54
TX2: 025.90026.0011
TX1: -1.09
TX1: 025.90027.0001
TX2: 0.62
TX2: 025.90026.0001
TX1: -1.17
TX1: 025.90019.0001 (640-INNEP0030-A)
TX2: 1.63
TX2: 025.9001A.0001 (640-INNEP0031-A)
TX1: 0.82
TX1: 025.90017.0001 (81.EEW15.GEL)
TX2: 0.49
TX2: 025.90018.0001 (81.EEW15.GEM)
TX1: -0.93
TX1: SK970WIPB01+A
TX2: -0.36
TX2: SK970WIPB02+A
TX1: 1.98
TX1: T-543-9021011-A
TX2: 1.91
TX2: T-543-9021011-A
TX1: 2.27
TX1: 79011HU00-600-G
TX2: 1.14
TX2: 79011HU00-600-G
TX1: 1.06
Foxconn
179
TX1: DQ600856200/
ANTA0HQ08562WLGP4
TX1: DQ6V5NS3300
PIFA
IPEX
TX1: -0.57
(WDAN-HQV5NS33-DH)
TX2: -0.97
TX2: DQ6V5NS3300
(WDAN-HQV5NS33-DH)
180
Foxconn
PIFA
IPEX
TX1: -0.07
Foxconn
181
TX1: DQ6V5NS3100
(WDAN-HQV5NS31-DH)
TX1: DQ6V5TS3300
PIFA
IPEX
TX1: 0.30
(WDAN-HQV5TS33-DH)
TX2: -0.18
TX2: DQ6V5TS3300
(WDAN-HQV5TS33-DH)
182
Foxconn
PIFA
IPEX
TX1: 2.25
Foxconn
183
TX1: DQ6V5TS3100
(WDAN-HQV5TS31-DH)
TX1: DQ6V7NS3300
PIFA
IPEX
TX1: 0.48
(WDAN-HQV7NS33-DH)
TX2: -0.69
TX2: DQ6V7NS3300
(WDAN-HQV7NS33-DH)
184
185
186
Foxconn
Foxconn
Foxconn
PIFA
IPEX
TX1: -0.89
PIFA
IPEX
TX1: 2.34
PIFA
IPEX
TX1: 1.44
TX1: DQ6V7NS3100
(WDAN-HQV7NS31-DH)
TX1: DQ6V7TS3100
(WDAN-HQV7TS31-DH)
TX1: DQ6V4NS3300
Page No.: C11 of C14
TX2: 1.04
(WDAN-HQV4NS33-DH)
TX2: DQ6V4NS3300
(WDAN-HQV4NS33-DH)
187
Foxconn
PIFA
IPEX
TX1: -0.93
Foxconn
188
TX1: DQ6V4NS3100
(WDAN-HQV4NS31-DH)
TX1: DQ6V4TS3300
PIFA
IPEX
TX1: 1.25
(WDAN-HQV4TS33-DH)
TX2: 3.36
TX2: DQ6V4TS3300
(WDAN-HQV4TS33-DH)
189
Foxconn
PIFA
IPEX
TX1: 2.39
Foxconn
190
TX1: DQ6V4TS3100
(WDAN-HQV4TS31-DH)
TX1: DQ6V7TS3300
PIFA
IPEX
TX1: -0.52
(WDAN-HQV7TS33-DH)
TX2: 2.89
TX2: DQ6V7TS3300
(WDAN-HQV7TS33-DH)
191
192
193
194
195
196
197
198
JESS-LINK
JESS-LINK
JESS-LINK
JESS-LINK
JESS-LINK
JESS-LINK
TONGDA
WNC
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: -0.97
TX1: DQ613A00032 (PANT13A00008-6)
TX2: -1.03
TX2: DQ613A00032 (PANT13A00008-6)
TX1: -0.03
TX1: DQ613A00033 (PANT13A00007-9)
TX1: -1.46
TX1: DQ613A00024 (PANT13A00008-8)
TX2: -0.43
TX2: DQ613A00024 (PANT13A00008-8)
TX1: 0.29
TX1: DQ613A00025 (PANT13A00008-2)
TX1: -0.40
TX1: DQ613A00028 (PANT13A00008-4)
TX2: 0.40
TX2: DQ613A00028 (PANT13A00008-4)
TX1: 0.93
TX1: DQ613A00029 (PANT13A00007-7)
TX1: 0.04
TX1: DC33001H800 / T-543-9001008-1
TX2: -1.22
TX2: DC33001H810 / T-543-9001008-2
TX1: -0.02
TX1: DC33001H900 / 81EAAK15.GCC
TX2: 2.24
TX2: DC33001H910 / 81EAAK15.GCD
Yageo
199
TX1: DC33001HB00 /
PIFA
IPEX
TX1: 0.67
ANTA0HC08231WLAN1
TX2: -0.83
TX2: DC33001HB10 /
ANTA0HC08231WLAN2
200
201
202
203
ACON
WNC
Smart Approach
TONGDA
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: -1.36
TX1: 6036B0110902 (APP8P-700479 )
TX2: -1.53
TX2: 6036B0111002 (APP8P-700480 )
TX1: -0.75
TX1: 6036B0110901 (81EAAK15.G66)
TX2: 1.05
TX2: 6036B0111001 (81EAAK15.G67)
TX1: 0.93
TX1: DC33001HF00/ SE-ECS41-001
TX2: -0.55
TX2: DC33001HF10/ SE-ECS41-002
TX1: 0.74
TX1: DC33001HE00 / T-543-9001007-1
TX2: -0.07
TX2: DC33001HE10 / T-543-9001007-2
Page No.: C12 of C14
204
205
206
207
208
209
WNC
SIMYA
SIMYA
SIMYA
SIMYA
SIMYA
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
PIFA
IPEX
TX1: 0.39
TX1: DC33001HD00/ 81EAAK15.GCA
TX2: 0.27
TX2: DC33001HD10/ 81EAAK15.GCB
TX1: 1.30
TX1: DQ601001400
TX2: -0.65
TX2: DQ601001400
TX1: 0.72
TX1: DQ601001500
TX1: -1.82
TX1: DQ601001200
TX2: 1.86
TX2: DQ601001200
TX1: 1.27
TX1: DQ601001300
TX1: 2.23
TX1: DQ601001800
TX2: 1.38
TX2: DQ601001800
210
SIMYA
PIFA
IPEX
TX1: 0.18
TX1: DQ601001900
211
SIMYA
PIFA
IPEX
TX1: 2.23
TX1: DQ601001700
PIFA
IPEX
TX1: 0.04
TX1: DQ601001000
TX2: 0.38
TX2: DQ601001000
PIFA
IPEX
TX1: 1.60
TX1: DQ601001100
PIFA
IPEX
TX1: -0.79
TX1: DQ601000800
TX2: 1.62
TX2: DQ601000800
212
213
214
SIMYA
SIMYA
SIMYA
215
SIMYA
PIFA
IPEX
TX1: 2.20
TX1: DQ601000900
216
ACON
PIFA
IPEX
TX1: 0.51
TX1: 6036B0121903 (APP6P-701022)
PIFA
IPEX
TX1: -0.55
TX1: 6036B0121901 (SE-EISW4-001)
PIFA
IPEX
TX1: 2.23
TX1: DQ601001600
TX2: 1.38
TX2: DQ601001600
217 Smart Approach
218
SIMYA
219
WNC
PIFA
IPEX
TX1: 2.59
TX1: DQ6R15G1000 (81EAAR15.G10)
220
WNC
PIFA
IPEX
TX1: 0.83
TX1: DQ6R15G5400 (81EAAR15.G54)
PIFA
IPEX
TX1: -0.14
TX1: DQ6R15G1100 (81EAAR15.G11)
TX2: -0.24
TX2: DQ6R15G1100 (81EAAR15.G11)
PIFA
IPEX
TX1: -0.67
TX1: DQ6R15G1200 (81EAAR15.G12)
PIFA
IPEX
TX1: -0.23
TX1: DQ6R15G1300 (81EAAR15.G13)
TX2: 0.96
TX2: DQ6R15G1300 (81EAAR15.G13)
PIFA
IPEX
TX1: 1.22
TX1: DQ6R15G1400 (81EAAR15.G14)
PIFA
IPEX
TX1: 1.29
TX1: DQ6R15G1500 (81EAAR15.G15)
TX2: 1.99
TX2: DQ6R15G1500 (81EAAR15.G15)
PIFA
IPEX
TX1: 1.52
TX1: DQ6R15G1600 (81EAAR15.G16)
PIFA
IPEX
TX1: -0.91
TX1: DQ6R15G1700 (81EAAR15.G17)
TX2: 1.99
TX2: DQ6R15G1700 (81EAAR15.G17)
PIFA
IPEX
TX1: 2.45
TX1: DQ6R15G1800 (81EAAR15.G18)
PIFA
IPEX
TX1: 0.80
TX1: DQ6R15G5600 (81EAAR15.G56)
TX2: 0.01
TX2: DQ6R15G5600 (81EAAR15.G56)
PIFA
IPEX
TX1: 2.33
TX1: DQ6R15G5700 (81EAAR15.G57)
221
222
223
224
225
226
227
228
229
230
WNC
WNC
WNC
WNC
WNC
WNC
WNC
WNC
WNC
WNC
Page No.: C13 of C14
231
WNC
PIFA
IPEX
TX1: 0.46
TX1: DQ6R15G0900 (81EAAR15.G09)
TX2: 2.13
TX2: DQ6R15G0900 (81EAAR15.G09)
Page No.: C14 of C14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Create Date                     : 2014:04:02 16:42:49+08:00
Creator                         : Microsoft® Word 2010
Modify Date                     : 2014:04:24 19:22:36+08:00
Has XFA                         : No
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2014:04:24 19:22:36+08:00
Producer                        : Microsoft® Word 2010
Format                          : application/pdf
Document ID                     : uuid:a27730bf-f0f3-4d07-9626-fb9cfec31569
Instance ID                     : uuid:19f4e51b-bd40-44dc-9208-1844a989def8
State                           : 1
Version                         : 1.1
Page Count                      : 30

EXIF Metadata provided by EXIF.tools