Realtek Semiconductor RTL8821AE 802.11 a/b/g/n/ac RTL8821AE Combo module User Manual RTL8821AE ok

Realtek Semiconductor Corp. 802.11 a/b/g/n/ac RTL8821AE Combo module RTL8821AE ok

Users Manual

Download: Realtek Semiconductor RTL8821AE 802.11 a/b/g/n/ac RTL8821AE Combo module User Manual RTL8821AE  ok
Mirror Download [FCC.gov]Realtek Semiconductor RTL8821AE 802.11 a/b/g/n/ac RTL8821AE Combo module User Manual RTL8821AE  ok
Document ID2011207
Application IDnqEePApihaIX0PF0CK0GyA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.96kB (212024 bits)
Date Submitted2013-07-09 00:00:00
Date Available2014-01-05 00:00:00
Creation Date2017-10-26 18:04:04
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-26 18:04:04
Document TitleMicrosoft Word - RTL8821AE_User Manual-ok.doc
Document CreatorPScript5.dll Version 5.2.2
Document Author: SharonJiang

RTL8821AE
Combo module User’s Manual
Rev.0.1
28 Jan 2013
Realtek Semiconductor Corp.
No. 2, Innovation Road II, Hsinchu Science Park, Hsinchu 300, Taiwan
Tel.: +886-3-578-0211. Fax: +886-3-577-6047
www.realtek.com.tw
RTL8821AE Combo module User Manual
COPYRIGHT
©2012 Realtek Semiconductor Corp. All rights reserved. No part of this document may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any
means without the written permission of Realtek Semiconductor Corp.
DISCLAIMER
Realtek provides this document ‘as is’, without warranty of any kind. Realtek may make improvements
and/or changes in this document or in the product described in this document at any time. This document
could include technical inaccuracies or typographical errors.
TRADEMARKS
Realtek is a trademark of Realtek Semiconductor Corporation. Other names mentioned in this document are
trademarks/registered trademarks of their respective owners.
USING THIS DOCUMENT
This document is intended for the software engineer’s reference and provides detailed programming
information.
Though every effort has been made to ensure that this document is current and accurate, more information
may have become available subsequent to the production of this guide.
REVISION HISTORY
Revision
0.1
Release Date
2013/1/28
Summary
Preliminary release.
Single-Chip 802.11b/g/n/ac 1T1R WLAN Controller
ii
Track ID: JATR-3375-16 Rev. 0.1
RTL8821AE Combo module User Manual
Table of Contents
1.
GENERAL DESCRIPTION................................................................................................................................................1
2.
PRODUCT SPECIFICATIONS..........................................................................................................................................3
2.1. ENVIRONMENTAL ............................................................................................................................................................3
2.1.1.
Operating ...............................................................................................................................................................3
2.1.2.
Storage....................................................................................................................................................................3
2.2. FUNCTIONAL SPECIFICATIONS .........................................................................................................................................3
2.3. WARNING ........................................................................................................................................................................5
3.5.1 Federal Communication Commission Interference Statement ......................................................................................5
3.5.2 Industry Canada Statement ..........................................................................................................................................6
3.5.3 NCC 警語 ...................................................................................................................................................................10
List of Tables
TABLE 2. FUNCTIONAL SPECIFICATIONS .......................................................................................................................................3
Single-Chip 802.11b/g/n/ac 1T1R WLAN Controller
iii
Track ID: JATR-3375-16 Rev. 0.1
RTL8821AE Combo module User Manual
1.
General Description
The Realtek RTL8821AE is a highly integrated single-chip 802.11b/g/n/ac 1T1R WLAN PCI Express
network interface controller with integrated Bluetooth 2.1/3/0/4.0 USB interface controller. It combines a
WLAN MAC, a 1T1R capable WLAN baseband, BT Protocol Stack (LM, LL, and LE), BT Baseband,
modem, and WLAN/BT RF in a single chip. The RTL8821AE provides a complete solution for a high
throughput performance integrated wireless LAN and Bluetooth device.
The RTL8821AE WLAN baseband implements Orthogonal Frequency Division Multiplexing (OFDM)
with 1 transmit and 1 receive path and is compatible with the 802.11ac specification. Features include one
spatial stream transmission, short guard interval (GI) of 400ns, spatial spreading, and transmission over
20MHz , 40MHz and 80MHz channel bandwidth.
For legacy compatibility, Direct Sequence Spread Spectrum (DSSS), Complementary Code Keying (CCK)
and OFDM baseband processing are included to support all 802.11b and 802.11g data rates. Differential
phase shift keying modulation schemes, DBPSK and DQPSK with data scrambling capability, are available,
and CCK provides support for legacy data rates, with long or short preamble. The high-speed FFT/IFFT
paths, combined with BPSK, QPSK, 16QAM, 64QAM and 256-QAM modulation of the individual
subcarriers and rate compatible punctured convolutional coding with coding rate of 1/2, 2/3, 3/4, and 5/6,
provide up to 433.3Mbps for 802.11ac OFDM.
A RTL8821AE built-in enhanced signal detector, adaptive frequency domain equalizer, and a soft-decision
Viterbi decoder help to alleviate multi-path effects and mutual interference in the reception of multiple
streams. Robust interference detection and suppression are provided to protect against Bluetooth, cordless
phone, and microwave oven interference.
Efficient IQ-imbalance, DC offset, phase noise, frequency offset, and timing offset compensations are
provided for the radio frequency front-end. Selectable digital transmit and receive FIR filters are provided
to meet transmit spectrum mask requirements and to reject adjacent channel interference, respectively.
The RTL8821AE WLAN Controller supports fast receiver Automatic Gain Control (AGC) with
synchronous and asynchronous control loops among antennas, antenna diversity functions, and adaptive
transmit power control function to obtain better performance in the analog portions of the transceiver.
The RTL8821AE WLAN MAC supports 802.11e for multimedia applications, 802.11i for security, and
802.11n/802.11ac Draft 2.0 for enhanced MAC protocol efficiency. Using packet aggregation techniques
such as A-MPDU with BA and A-MSDU, protocol efficiency is significantly improved. Power saving
mechanisms such as Legacy Power Save, and U-APSD, reduce the power wasted during idle time, and
compensate for the extra power required to transmit OFDM. The RTL8821AE provides simple legacy and
20MHz/40MHz/80MHz co-existence mechanisms to ensure backward and network compatibility.
Single-Chip 802.11b/g/n/ac 1T1R WLAN Controller
Track ID: JATR-3375-16 Rev. 0.1
RTL8821AE Combo module User Manual
The RTL8821AE Bluetooth controller complies with Bluetooth core specification v4.0, and supports dual
mode (BR/EDR + AMP + Low Energy Controllers). It is compatible with previous versions, including v2.1
+ EDR and v3.0 + HS. For BR/EDR, it supports scatternet topology and allows four active links in slave
mode, and seven active links in master mode. For Low Energy, it supports multiple states and allows eight
active links in master mode. The links in BR/EDR and LE can be active simultaneously.
Single-Chip 802.11b/g/n/ac 1T1R WLAN Controller
Track ID: JATR-3375-16 Rev. 0.1
RTL8821AE Combo module User Manual
2. Product specifications
2.1. Environmental
2.1.1.
Operating
Operating Temperature:
Relative Humidity:
2.1.2.
-20 to 70 C
5-90% (non-condensing)
Storage
Temperature:
Relevant Humidity:
-55 to 125 C
5-95% (non-condensing)
2.2. Functional Specifications
Standards
Bus Interface
Form Factor
Data Rate
Media Access Control
Modulation Techniques
Network Architecture
Table 1. Functional Specifications
WiFi:
IEEE 802.11a/b/g/n/e/i/h/k/r/draft-ac
BT:
V2.1+EDR/BT v3.0/BT v3.0+HS/BT v4.0
WiFi: PCI Express BT: USB
Half Size Mini Card
802.11b:
11, 5.5, 2, 1 Mbps;
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n:
MCS 0 to 15 for HT20MHz;
MCS 0 to 15 for HT40MHz
802.11ac:
MCS 0 to 8 for HT20MHz;
MCS 0 to 9 for HT40MHz;
MCS 0 to 9 for HT80MHz
WiFi:
CSMA/CA with ACK
WiFi + BT:
AFH, Time Division
802.11b:
CCK, DQPSK, DBPSK
802.11a/g/n:
64 QAM, 16 QAM, QPSK, BPSK
802.11ac:
256QAM, 64 QAM, 16 QAM, QPSK, BPSK
BT:
GFSK, /4 DQPSK, 8DPSK
WiFi:
Rev.1.0
RTL8821AE Combo module User Manual
Ad-hoc mode (Peer-to-Peer )
Infrastructure mode
BT 2.4GHz:
Ch. 0 ~78
WiFi 2.4GHz:
11: (Ch. 1-11) – United States
13: (Ch. 1-13) – Europe
14: (Ch. 1-14) – Japan
WiFi 5GHz:
Operating Channel
20MHz band width :
Ch 36, 40, 44, 48,
Ch 52, 56, 60, 64,
Ch 100, 104, 108, 112, 116, 120, 124, 128,132,136, 140,
Ch 149,153, 157,161, 165.
40MHz band width :
Ch 38, 46,
Ch 54, 62,
Ch 102, 110, 118, 126, 134,
Ch 151, 159.
Frequency Range
Security
Operating Voltage
80MHz band width :
Ch 42
Ch 58
Ch 105, 122
Ch 155.
2.400GHz ~ 2.4835 GHz
5.1500GHz ~ 5.3500GHz
5.4700GHz ~ 5.7250GHz
5.7250GHz ~ 5.8500GHz
WiFi :
WPA, WPA-PSK, WPA2, WPA2-PSK, WEP 64bit & 128bit, IEEE
802.11x, IEEE 802.11i
BT:
Simple Paring
3.3 V ±9% I/O supply voltage
Rev.1.0
RTL8821AE Combo module User Manual
2.3. Warning
3.5.1 Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through
11.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) This device and its antenna(s) must not be co-located with any other transmitters except in accordance
with FCC multi-transmitter product procedures.Refering to the multi-transmitter policy,
multiple-transmitter(s) and module(s) can be operated simultaneously without C2P.
3) For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied
firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain
Rev.1.0
RTL8821AE Combo module User Manual
change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed (for example, digital device emissions, PC peripheral requirements,
etc.).
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the FCC authorization is no longer considered
valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will
be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC
authorization.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains FCC ID: TX2-RTL8821AE”.
Manual Information To the End User
This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all
the rules that apply to the product into which this certified RF module is integrated.
Additional testing and certification may be necessary when multiple modules are used.
Devices will not permit operations on channels 120-132 for 11a and 11n/a which overlap the 5600 - 5650
MHz band.
3.5.2 Industry Canada Statement
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the
following two conditions:
1) this device may not cause interference and
2) this device must accept any interference, including interference that may cause undesired operation of
the device
French translation:
Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts
de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire
de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage
susceptible de provoquer un fonctionnement indésirable.
(The user manual of transmitter devices equipped with detachable antennas shall contain the following
information in a conspicuous location: )
This device has been designed to operate with an antenna having a maximum gain of 5 dBi. Antenna having
a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is
50 ohms.
Rev.1.0
RTL8821AE Combo module User Manual
CAN ICES-3 (B)/NMB-3(B)
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent
isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
French translation:
(Le manuel d'utilisation de dispositifs émetteurs équipés d'antennes amovibles doit contenir les
informations suivantes dans un endroit bien en vue:)
Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximum de 5 dBi. Une antenne
à gain plus élevé est strictement interdite par les règlements d'Industrie Canada. L'impédance d'antenne
requise est de 50 ohms.
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peutfonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur) approuvé pourl'émetteur par Industrie Canada. Dans
le but de réduire les risques de brouillage radioélectriqueà l'intention des autres utilisateurs, il faut choisir le
type d'antenne et son gain de sorte que lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas
l'intensité nécessaire àl'établissement d'une communication satisfaisante.
IMPORTANT NOTE:
IC Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator & your
body.
French translation:
NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles)
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de
distance entre la source de rayonnement et votre corps.
Caution: (DFS band usage-full bands)
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for
harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz
shall comply with the e.i.r.p. limit; and
(iii) the maximum antenna gain permitted for devices in the band 5725-5825 MHz shall comply with the
e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate.
Rev.1.0
RTL8821AE Combo module User Manual
(iv) Users should also be advised that high-power radars are allocated as primary users (i.e. priority users)
of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or
damage to LE-LAN devices.
(v) Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz,
5470-5600 MHz and 5650-5725 MHz
French translation:
Avertissement:
Le guide d’utilisation des dispositifs pour réseaux locaux doit inclure des instructions précises sur les
restrictions susmentionnées, notamment :
(i) les dispositifs fonctionnant dans la bande 5 150-5 250 MHz sont réservés uniquement pour une
utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux;
(ii) le gain maximal d’antenne permis pour les dispositifs utilisant les bandes 5 250-5 350 MHz et 5 470-5
725 MHz doit se conformer à la limite de p.i.r.e.;
(iii) le gain maximal d’antenne permis (pour les dispositifs utilisant la bande 5 725-5 825 MHz) doit se
conformer à la limite de p.i.r.e. spécifiée pour l’exploitation point à point et non point à point, selon le cas.
(iv) De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars de haute puissance sont
désignés utilisateurs principaux (c.-à-d., qu’ils ont la priorité) pour les bandes 5 250-5 350 MHz et 5 650-5
850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL.
(v) Sélection dynamique de fréquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350
MHz, 5470-5600 MHz et 5650-5725 MHz.
This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and
2) This device and its antenna(s) must not be co-located with any other transmitters except in accordance
with IC multi-transmitter product procedures.Refering to the multi-transmitter policy,
multiple-transmitter(s) and module(s) can be operated simultaneously without reassessment permissive
change.
3) For all products market in Canada, OEM has to limit the operation channels in CH1 to CH11 for 2.4G
band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user
regarding to Regulatory Domain change.
As long as 3 conditions above are met, further transmitter test will not be required. However, the OEM
integrator is still responsible for testing their end-product for any additional compliance requirements
required with this module installed.
Rev.1.0
RTL8821AE Combo module User Manual
The device could automatically discontinue transmission in case of absence of information to transmit, or
operational failure. Note that this is not intended to prohibit transmission of control or signaling
information or the use of repetitive codes where required by the technology.
French translation :
Cet appareil est conçu uniquement pour les intégrateurs OEM dans les conditions suivantes: (Pour
utilisation de dispositif module)
1) L'antenne doit être installée de telle sorte qu'une distance de 20 cm est respectée entre l'antenne et les
utilisateurs, et
2) Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une
autre antenne ou transmetteur.
3) Pour tous les produits vendus au Canada, OEM doit limiter les fréquences de fonctionnement CH1 à
CH11 pour bandes de fréquences 2.4G grâce aux outils de microprogrammation fournis. OEM ne doit pas
fournir d'outil ou d'informations à l'utilisateur final en ce qui concerne le changement de réglementation de
domaine.
Tant que les 3 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas
nécessaires. Toutefois, l'intégrateur OEM est toujours responsable des essais sur son produit final pour
toutes exigences de conformité supplémentaires requis pour ce module installé.
Le dispositif pourrait automatiquement cesser d'émettre en cas d'absence d'informations à transmettre, ou
une défaillance opérationnelle. Notez que ce n'est pas l'intention d'interdire la transmission des
informations de contrôle ou de signalisation ou l'utilisation de codes répétitifs lorsque requis par la
technologie.
IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop
configurations or co-location with another transmitter), then the IC authorization is no longer considered
valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a separate IC
authorization.
French translation:
NOTE IMPORTANTE:
Dans le cas où ces conditions ne peuvent être satisfaites (par exemple pour certaines configurations
d'ordinateur portable ou de certaines co-localisation avec un autre émetteur), l'autorisation du Canada n'est
plus considéré comme valide et l'ID IC ne peut pas être utilisé sur le produit final. Dans ces circonstances,
Rev.1.0
RTL8821AE Combo module User Manual
l'intégrateur OEM sera chargé de réévaluer le produit final (y compris l'émetteur) et l'obtention d'une
autorisation distincte au Canada.
End Product Labeling
This transmitter module is authorized only for use in device where the antenna may be installed such that 20
cm may be maintained between the antenna and users. The final end product must be labeled in a visible
area with the following: “Contains IC: 6317A-RTL8821AE”.
French translation:
Plaque signalétique du produit final
Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être
installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le
produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC:
6317A-RTL8821AE ".
Manual Information To the End User
The OEM integrator has to be aware not to provide information to the end user regarding how to install or
remove this RF module in the user’s manual of the end product which integrates this module.
The end user manual shall include all required regulatory information/warning as show in this manual.
French translation:
Manuel d'information à l'utilisateur final
L'intégrateur OEM doit être conscient de ne pas fournir des informations à l'utilisateur final quant à la façon
d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce
module.
Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et
avertissements comme indiqué dans ce manuel.
3.5.3 NCC 警語
經型式認證合格之低 率射頻電機,非經許 ,公司 商號或使用者均不得擅自變更頻率
率或變更原設計之特性及 能
大
低 率射頻電機之使用不得影響飛航安 及 擾合法通信 經發現有 擾現象時,應立即停用,並
改善至無 擾時方得繼續使用 前項合法通信,指依電信法規定作業之無線電通信 低 率射頻電
機須忍 合法通信或工業 科學及醫療用電波輻射性電機設備之 擾
10
Rev.1.0
RTL8821AE Combo module User Manual
在5.25-5.35GHz頻帶
操作之無線資訊傳輸設備,限室
使用
本模組於 得認證後將依規定於模組本體標示審合格籤,並要求
組 ID編號
上標示
本產品
含射頻模
3.5.4 Japan Statement
Host system must be labeled with "Contains MIC ID:xxxxxx“, MIC ID displayed on label.
Realtek Semiconductor Corp.
Headquarters
No. 2, Innovation Road II, Hsinchu Science Park,
Hsinchu, 300, Taiwan, R.O.C.
Tel: 886-3-5780211 Fax: 886-3-5776047
www.realtek.com.tw
11
Rev.1.0
RTL8821AE Combo module User Manual
No.
Brand
Ant.
Type
01
LYNwave
PIFA
02
03
04
LYNwave
JOYMAX
Realtek
DIPOLE
05
Realtek
SLOT
06
Well Green
PIFA
IPEX
07
Well Green
PIFA
IPEX
08
JESS-LINK
PIFA
IPEX
09
HIGH-TEK
PIFA
IPEX
10
Luxshared
PIFA
IPEX
11
Well Green
PIFA
IPEX
12
Well Green
PIFA
IPEX
13
Wgt
PIFA
IPEX
14
Acon
PIFA
IPEX
15
Acon
PIFA
IPEX
16
WNC
PIFA
IPEX
17
Zhan Yun
PIFA
IPEX
18
WNC
PIFA
IPEX
19
YAGEO
PIFA
IPEX
20
WNC
PIFA
IPEX
21
JESS-LINK
PIFA
IPEX
22
Foxconn
PIFA
IPEX
23
Well Green
PIFA
IPEX
24
Luxshared
PIFA
IPEX
25
Well Green
PIFA
IPEX
26
Well Green
PIFA
IPEX
27
Wgt
PIFA
IPEX
PIFA
SLOT
Con.
Type
IPEX
MHF4
IPEX
IPEX
IPEX
IPEX
MHF4
Peak Gain
(dBi)
2.4GHz
5GHz
Model No.
TX1: 3.5
TX1: ALA110-222050-300011
TX1: 3.5
TX1: 3.0
TX1:3.33
4.52
TX1: ALA110-222050-300010
TX1: TWF-614XMPXX-500
TX1: PANT­ 001
TX1:3.33
4.52
TX1: PANT­ 002
TX1: 0.85
TX2: 0.44
TX1: 0.42
TX2: -0.13
TX1: 2.72
TX2: 0.07
TX1: -0.93
TX2: 0.87
TX1: 2.08
TX2: 0.14
TX1: 0.55
TX2: 1.36
TX1: 0.82
TX2: -2.23
TX1: 2.14
TX2: 1.92
TX1: -0.63
TX2: -3.39
TX1: -0.13
TX2: -0.23
TX1: -0.58
TX2: -1.48
TX1: -0.70
TX2: -1.20
TX1: 1.15
TX2: 0.59
TX1: 0.59
TX2: 0.90
TX1: 0.18
TX2: 0.60
TX1: 1.89
TX2: 1.56
TX1: 0.21
TX2: 0.60
TX1: 0.21
TX2: -0.75
TX1: -0.6
TX2: -0.29
TX1: 0.72
TX2: 0.49
TX1: -0.17
TX2: -2.24
TX1: 1.7
0.75
1.24
0.11
1.27
1.52
0.91
1.48
0.96
3.62
-1.91
1.26
3.74
0.94
2.18
1.72
2.65
-0.71
0.12
1.34
-0.63
-0.67
-0.47
-0.13
0.80
-0.51
-0.04
0.35
0.95
1.92
1.50
-0.07
-0.09
1.23
-0.36
1.65
1.15
0.74
0.98
-0.72
-0.71
-0.13
0.03
2.2
TX1: SKW10WMPB01+A
TX2: SKW10WMPB02+A
TX1: SK65EWMPB01+A
TX2: SK650WMPB02+A
TX1: DC33001AD00
TX2: DC33001AD00
TX1: DC33001AC00
TX2: DC33001AC00
TX1: L01RF019-DT-R (31-502717)
TX2: L01RF021-DT-R (31-502716)
TX1: SKAEUWMPB01+B
TX2: SKAEUWMPB01+B
TX1: SKA91WMPB02+A
TX2: SKA91WMPB01+A
TX1: W550EU WM-1
TX2: W550EU WM-2
TX1: APP6P-700781
TX2: APP6P-700782
TX1: ATM6P-70100
TX2: ATM6P-70200
TX1: DQ6G15G5800
TX2: DQ6G15G5700
TX1: DQ60QTLI200
TX2: DQ60QTLI201
TX1: 81.EKG15.G30
TX2: 81.EKG15.G29
TX1: CAN4313LC0613WLA3
TX2: CAN4313LC0613WLA4
TX1: 81.EKG15.G38
TX2: 81.EKG15.G37
TX1: PANT11A00008-1
TX2: PANT11A00009-1
TX1: WDAN-T1RH1
TX2: WDAN-T1RH2
TX1: SKX71WMPB01+B
TX2: SK370WMPB01+B
TX1: L01RF008-R
TX2: L01RF009-R
TX1: SKW25WMPB01+A
TX2: SKW25WMPB01+A
TX1: SK549WMPB01+A
TX2: SK549WMPB02+A
TX1: W350ETQ WM-1
12
Rev.1.0
RTL8821AE Combo module User Manual
28
Well Green
PIFA
IPEX
29
Joinsoon
PIFA
IPEX
30
WNC
PIFA
IPEX
31
Wieson
PIFA
IPEX
32
Yageo
PIFA
IPEX
33
Yageo
PIFA
IPEX
34
Yageo
PIFA
IPEX
35
Yageo
PIFA
IPEX
36
WNC
PIFA
IPEX
37
TE Connectivity
PIFA
IPEX
38
HIGH-TEK
PIFA
IPEX
39
HIGH-TEK
PIFA
IPEX
40
HIGH-TEK
PIFA
IPEX
41
ACON
PIFA
IPEX
42
INPAQ Technology Dipole
IPEX
TX2: 2.53
TX1: -1.93
TX2: -1.28
TX1: 2.6
TX2: 0.53
TX1: 0.24
TX2: -0.58
TX1: 1.28
TX2: 0.34
TX1: -0.27
TX2: -0.88
TX1: -0.11
TX2: -0.68
TX1: -1.32
TX2: -1.14
TX1: 2.74
TX2: 0.63
TX1: -0.61
TX2: 1.91
TX1: 1.29
TX2: 0.04
TX1: -2.20
TX2: -2.20
TX1: -0.70
TX2: -0.60
TX1: -0.42
TX2: 1.59
TX1: 0.96
TX2: 1.33
TX1: -1.1
TX2: 0.45
2.78
-1.13
1.08
2.61
2.60
2.85
-0.16
3.84
2.60
1.42
0.33
0.42
0.34
2.94
1.89
0.07
0.46
2.23
-0.40
1.25
1.08
0.1
0.7
0.55
0.14
2.27
-0.05
1.27
1.61
1.59
-0.02
43
Well Green
PIFA
IPEX
TX1: 1.05
TX2: -0.41
1.08
2.32
44
Well Green
PIFA
IPEX
TX1: -1.61
TX2: -2.84
-0.14
-0.96
45
Well Green
PIFA
IPEX
TX1: -0.93
TX2: 0.20
0.96
0.86
13
TX2: W350ETQ WM-2
TX1: SKW54WMPB01+C
TX2: SKW34WMPB02+A
TX1: IA-120266
TX2: IA-120267
TX1: 25.90AH8.001
TX2: 25.90AH7.001
TX1: 25.90AH8.011
TX2: 25.90AH7.011
TX1: 25.90AH8.021
TX2: 25.90AH7.021
TX1: 25.90AJB.001
TX2: 25.90AJC.001
TX1: 25.90AJB.001
TX2: 25.90AJC.001
TX1: 25.90ALR.001
TX2: 25.90ALQ.001
TX1: 25.90AAL.001
TX2: 25.90AAK.001
TX1: 25.90AAL.011
TX2: 25.90AAK.011
TX1: 25.90ALR.011
TX2: 25.90ALQ.011
TX1: 25.90AJB.011
TX2: 25.90AJC.011
TX1: 25.90AJB.011
TX2: 25.90AJC.011
TX1: ATP6P -700000
TX2: ATP6P -700001
TX1: DAM-14-H-DB-800-10-17
TX2: DAM-14-H-DB-800-10-17
TX1: SK110WMPB01+A
TX2: SK110WMPB02+A
TX1: SKW23WMPB01+A
TX2: SKW23WMPB02+A
TX1: SK740WMPB01+A
TX2: SK740WMPB02+A
Rev.1.0

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : SharonJiang
Create Date                     : 2013:07:02 17:29:34+08:00
Modify Date                     : 2013:07:02 21:11:32+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Title                           : Microsoft Word - RTL8821AE_User Manual-ok.doc
Creator                         : SharonJiang
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:07:02 21:11:32+08:00
Producer                        : Acrobat Distiller 9.0.0 (Windows)
Document ID                     : uuid:de021087-41d3-4623-b548-73060cac702c
Instance ID                     : uuid:a075bad0-f393-402c-8c76-93cee42b39c9
Page Count                      : 16
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TX2-RTL8821AE

Navigation menu