Recon Dynamics B0-0003 Base Station for Asset Tracking User Manual

Recon Dynamics, LLC Base Station for Asset Tracking

a href="https://usermanual.wiki/Recon-Dynamics" itemprop="url"> Recon Dynamics >

User Manual

PROXBOX INSTALLATION GUIDE © 2018 Recon Dynamics, LLC | v1.2 1 ProxBox Installation Guide The ProxBox kit contains the following items needed to mount and install the Recon Dynamics ProxBox: ProxBox, patch antenna, power cable, vibration mounting kit and hardware and coax seal. After completing the installation be sure to visit www.recondynamics.com to access your account and complete the setup. Based on information Recon receives on your company contacts, users and structure an account will be created for you to access. Appendix A includes pictures of sample installations for your convenience. PROCEDURE While this procedure is written in the context of mounting the ProxBox onto a vehicle, it also applies to mounting the ProxBox to any piece of equipment which can supply constant 12 volt DC power to the box. PRE-INSTALLATION Compare with the list of contents provided with the kit. If any discrepancies are found, contact the Recon Dynamics customer service department. PROXBOX • Inspect the truck prior to installing the ProxBox to determine the best location for mounting the ProxBox and antenna. • Document any information regarding the vehicle or equipment the ProxBox is being installed on for input into the Recon system. • Document the serial number of the ProxBox for input into the Recon system. • Criteria for mounting a ProxBox: o Mount the ProxBox on a surface large enough that all 4 mounting points can be used. o Mount the ProxBox close enough to the front of a truck so the power cable can be hooked up to the truck's main battery with the supplied cable length. Extending the supplied power cord is acceptable to increase mounting options. o Mount the ProxBox such that no tools or equipment will damage it while they are in use or being stored on the truck. o Mount the ProxBox as high as possible and as far away from any nearby metal obstructions to minimize interference with the gray top. o See Appendix A for installation examples.
PROXBOX INSTALLATION GUIDE © 2018 Recon Dynamics, LLC | v1.2 2 It may be necessary to fabricate a mounting plate or structure to create the proper mounting condition for the ProxBox and patch antenna, which would then need to be mounted (welded or bolted), to the truck. PATCH ANTENNA • The recommended placement of the patch antenna should be located as high as possible with a good visibility to the back of the truck and separated as far away from the ProxBox as possible. Depending on the location of the battery, a typical installation has the ProxBox mounted on the driver’s side of the vehicle and the patch antenna mounted on the passenger’s side roughly 2-3 feet away. • Document the serial number of the Beacon (optional) attached to the side of the antenna for input into the Recon system if one is present. • Criteria for mounting the patch antenna: o Mount the patch antenna such that the antenna front (curved portion) is facing to the back of the truck. The best location is typically directly behind the cab of the truck. o Mount the patch antenna close enough to the ProxBox so the antenna cable can be connected to the ProxBox with the supplied cable length without stressing the connector. o Mount the patch antenna such that no tools or equipment will damage it while they are in use or being stored on the truck. o Mount the antenna as high as possible to minimize any interference. o See Appendix A for installation examples.
Download:
Mirror Download [FCC.gov]
Document ID4056744
Application ID/eCIkckC8kcED8222t+bjg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize183.17kB (2289625 bits)
Date Submitted2018-11-01 00:00:00
Date Available2018-11-01 00:00:00
Creation Date2018-10-22 12:02:45
Producing SoftwareGPL Ghostscript 9.06
Document Lastmod2018-10-22 12:02:45
Document TitleMicrosoft Word - Proxbox Installation Guide v1.2.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: Doug
FCC ID Filing: YQN-B0-0003

Navigation menu