Recoton AW2000 Stereophonic Home Theater TX User Manual 373 userman

Download:
Mirror Download [FCC.gov]
Document ID	153881
Application ID	i89gew1BJz9/qv9y+MCT2A==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	0.66kB (8288 bits)
Date Submitted	2001-06-08 00:00:00
Date Available	2001-06-07 00:00:00
Creation Date	2001-06-07 15:18:59
Producing Software	Acrobat PDFWriter 4.05 for Windows
Document Lastmod	0000-00-00 00:00:00
Document Title	373-userman
Document Creator	373-userman - Microsoft Word

Instruction Manual: AW2000
Magnetic Technology Rear Speaker
1.Connect transmitter to the sound source, using the supplied cable.
2. Connect the male connector of the transmitter box to the TV or VCR.
3. Connect the cable line, DSS downlead, or TV antenna to the female connector on the
transmitter box.
4. Connect the power supply adaptor to the transmitter and plug it into a wall socket. The
furnished power supply operates on standard U.S. 120Volt, 60 Hz AC. For other voltage
applications, contact Recoton Customer Service at 800 RECOTON.
5. Move the power switch to the “on” position.
6. Adjust the modulation control until the modulation indicator shows the proper level. This will
result in getting the clearest sound possible.
7. Locate the receiver battery compartment cover, and remove it.
8. Install 10 fresh “C” batteries in the compartment, giving careful attention to the polarity
markings in the cabinet, and replace cover.
9. After selecting the spot that you desire the speaker to be used, mount the speaker on the wall,
or place it on a table
10. Move the receiver power switch to the “on” position
11. If an audio source is present, advance the receiver “volume” control to the desired listening
level.
In case of difficulty:
Verify that the wall socket that the transmitter power adaptor is plugged into is live. Plug a lamp
into it to test.
Verify that the receiver batteries are not discharged. Try a fresh set.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
User modification of this unit is a violation of FCC certification rules. There are no user
serviceable components inside. Contact Recoton customer service at 800 RECOTON.
Specifications:
Transmitter
Frequencies: 2.28 and 2.79 MHz
Output power: Maximum allowed by FCC and Industry Canada regulation.
Power Consumption:
____ W from 120V AC
Audio input: ______to_______ Volts, RMS
Receiver
Receive frequencies: 2.28 and 2.79 MHz
Audio output: ______ W RMS into
Ω
Frequency response: _____ to _________
Battery Life: _____ Hrs at 1 W output
manufacturers quality and longevity.)
(Nominal. Recoton has no control over battery
RECOTON CORP.
FCC ID: CLVAW2000
EXHIBIT #: 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 2
Creator                         : 373-userman - Microsoft Word
Create Date                     : 2001:06:07 15:18:59
Title                           : 373-userman
Producer                        : Acrobat PDFWriter 4.05 for Windows

EXIF Metadata provided by EXIF.tools