Red Bear B-B1 Bluetooth BLE Beacon User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2223286
Application ID	xl/oxO9JrjH/YnEjJVQ7/g==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	26.15kB (326838 bits)
Date Submitted	2014-03-24 00:00:00
Date Available	2014-03-24 00:00:00
Creation Date	2014-03-12 13:52:35
Producing Software	Adobe PDF Library 9.0
Document Lastmod	2014-03-14 16:01:22
Document Title	User Manual
Document Creator	Adobe InDesign CS4 (6.0)

Beacon B1 Instruction
Overview
Congratulations on your New Beacon
device. To develop basic understandings and
get the most out of your purchase, be sure
to carefully read this manual and keep it on
hand for future reference.
Hanging hole
Mode button
Features:
-Bluetooth SIG Qualified product
-Apple’s iBeacon compatible
-Support Android 4.3 or later
-Security password setting
-Over-the-Air Firmware Upgradable
-Configurable to suit your Apps
-No Overhype
-Long battery life with 2pcs AAA battery
LED
OFF / ON
Switch
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment
Specification:
Standard
Bluetooth 4.0 Low Energy
Chipset & Stack Texas Instruments’s CC254x SoC and BLE Stack
Antenna Type
Multilayer Chip Antenna
Physical Range Up to 50 meters (Depends on enviornment)
Power Supply
Two triple-A (3A/AAA) batteries
Current Consumption (average)
0.25mA
Battery Life
4500+ hours;over 1year (operating 12hours/ day)
Dimension
(W)25mm x (H)70mm x (D)18.3mm
Net Weight
15gram
How to maintenance B1
1) Download our open sourced Sample Configuration App
http://www.redbear.net/support.html
2) Compile & Run the App on iOS device, it will show
“Searching for B1 in range”.
3) Switch ON the Beacon: Green light turns on. (now in
broadcasting mode)
by default the green LED is ON. It will broadcast iBeacon
signal periodically.
4) Press mode button: Red light turns on. (now in maintenance
mode)
5) App found B1, you can modify Beacon characteristics:
(See picture at right)
Tip: Adjust the value of iBeacon
signal “Measured Power” to aid
iOS determining more accurate
distance estimation, check out our
support page.
© 2014 RedBear. All Rights Reserved.
Bluetooth Services
Beacon B1 Instruction
Under maintenance mode, there are four Bluetooth Low Energy services available.
RedBear Beacon Service UUID: B0702980-A295-A8AB-F734-031A98A512DE
Device Information Service UUID: 180A
There are two characteristics you should pay attention to.
1. UUID: 2A28, Software Revision String
- this represents the software revision for the Beacon software within B1, the latest version is “20131128”
2. UUID: 38837046-FE96-4335-B751-D4826198F337, Device Name String
- you can rename the broadcasting device name of your B1
Battery Service UUID: 180F
- showing the remain battery life as a percentage
- please noted that the Red LED light on B1 will keep flashing when battery level fall to 30% or below
Firmware Upgrade Service UUID: E6775403-F0DD-40C4-87DB-95E755738AD1
- reserved for Over-The-Air firmware upgrade
RedBear Beacon Service
Under RedBear Beacon Service, there are seven Bluetooth Low Energy characteristics.
1. iBeacon UUID UUID: 0xB0702881-A295-A8AB-F734-031A98A512DE
- a unique 16-bytes value in HEX for advertising
2. iBeacon Major identity ID UUID: 0xB0702882-A295-A8AB-F734-031A98A512DE
- a 2-bytes value, ranging from 0 to 65535 (0xFFFF)
3. iBeacon Minor identity ID UUID: 0xB0702883-A295-A8AB-F734-031A98A512DE
- a 2-bytes value, ranging from 0 to 65535 (0xFFFF)
4. iBeacon Measured Power UUID: 0xB0702884-A295-A8AB-F734-031A98A512DE
- a 1-byte signed value, ranging from -100 to 0
- This is an average RSSI (Received Signal Strength Indication) of the beacon measured at approximately one meter
from an iOS device. This is a reference value in order for iOS to determine the distance between an iOS device and
a beacon.
- Please refer to Apple’s AirLocate sample about how to obtain Measured Power for your iBeacon
5. LED Switch UUID: 0xB0702885-A295-A8AB-F734-031A98A512DE
- a 1-byte value used to control the on-board green LED, either OFF (0x00) or ON (0x01)
- default is ON
6. iBeacon Advertising Interval UUID: 0xB0702886-A295-A8AB-F734-031A98A512DE
- a 2-bytes value, ranging from 100ms (0x0064) to 10000ms (0x2710) on a incremental of 5ms unit
- default is 250ms
- the time between each iBeacon signal broadcasted; shorter time will have better response time and accuracy, however
this will increase the power consumption due to more broadcasting in the same period of time.
7. iBeacon Output Power UUID: 0xB0702887-A295-A8AB-F734-031A98A512DE
- a 1-byte value, four available settings: -23dBm (0x00), -6dBm (0x01), 0dBm (0x02) or 4dBm (0x03)
- default is 0dBm (*our beacon is optimized to run at 0dBm.)
- the output power setting of the Texas Instruments CC254x IC; higher power should mean longer range and higher
© 2014 RedBear. All Rights Reserved.
power consumption.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Create Date                     : 2014:03:12 13:52:35+08:00
Metadata Date                   : 2014:03:14 16:01:22+08:00
Modify Date                     : 2014:03:14 16:01:22+08:00
Creator Tool                    : Adobe InDesign CS4 (6.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 10982 bytes, use -b option to extract)
Instance ID                     : uuid:06fe95cd-fa90-4fee-b72f-079f9932c5c7
Document ID                     : xmp.did:F59485AD9EA9E311B464C5D20CFCAC00
Original Document ID            : xmp.did:F59485AD9EA9E311B464C5D20CFCAC00
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F59485AD9EA9E311B464C5D20CFCAC00, xmp.iid:F69485AD9EA9E311B464C5D20CFCAC00, xmp.iid:F79485AD9EA9E311B464C5D20CFCAC00, xmp.iid:F89485AD9EA9E311B464C5D20CFCAC00, xmp.iid:F99485AD9EA9E311B464C5D20CFCAC00, xmp.iid:FA9485AD9EA9E311B464C5D20CFCAC00, xmp.iid:1213A745AAA9E311B952FA1B29EA8320, xmp.iid:1313A745AAA9E311B952FA1B29EA8320
History When                    : 2014:03:12 12:33:07+08:00, 2014:03:12 12:47:23+08:00, 2014:03:12 12:47:23+08:00, 2014:03:12 13:14:53+08:00, 2014:03:12 13:42:09+08:00, 2014:03:12 13:47:44+08:00, 2014:03:12 13:50:52+08:00, 2014:03:12 13:52:28+08:00
History Software Agent          : Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0, Adobe InDesign 6.0
History Changed                 : /, /metadata, /, /, /, /, /
Doc Change Count                : 792
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS4 (6.0)

EXIF Metadata provided by EXIF.tools