Red Digital Cinema One 31 6 16 Operation Guide ONE® BUILD 31.6.16 BETA

2015-07-27

• RED ONE® OPERATION GUIDE - BUILD 31.6.16 BETA
• TABLE OF CONTENTS
  • 1 of 2
  • 2 of 2
• DISCLAIMER
  • Copyright Notice
  • Trademark Disclaimer
  • Compliance
    • Industrial Canada Emission Compliance Statements
    • Federal Communications Commission (FCC) Statement
    • Australia and New Zealand Statement
    • Japan Statements
    • European Union Compliance Statements
• BEFORE YOU START
  • Important Safety Instructions
• THEORY OF OPERATION
  • MYSTERIUM® Sensor
  • MYSTERIUM X® Sensor
  • Image Processing
  • Audio Recording
  • Line Level Inputs
  • Microphone Level Inputs
  • Video Monitoring Outputs
    • RED EVF / BOMB EVF / RED LCD
  • Record Indicator
    • Recording Errors
  • Master / Slave Camera Configuration
  • Digital Magazines
    • Metadata
    • Clip Naming Conventions
      • Single Camera Configuration
      • Master / Slave Camera Configuration
      • SMPTE Timecode
  • Power Consumption
• CAMERA CONTROLS, CONNECTORS AND DISPLAYS
  • Camera Controls
    • Left Front of Camera
    • Rear of Camera
      • UNDO / EXIT Buttons
        • Shortcuts
    • Joystick Operation
    • Power On / Off switch
  • Camera Connectors
    • Right Side of Camera
    • Rear of Camera
  • Camera Displays
    • Camera LCD Status Display
    • RED EVF
    • BOMB EVF
    • RED LCD
    • External HD-SDI or HDMI Monitors
    • RED LCD / RED EVF / HD-SDI / HDMI Display Elements
• BASIC OPERATION
  • Power Up / Down
  • Operating Camera using RED Charger
  • Recharging Batteries using RED Charger
  • First Time Use - Setting Up Your RED ONE
    • Master / Slave Camera Configuration
  • Connecting Media
  • Project Setup
    • Resolution
    • Time Base
    • Quality
  • Recording
  • Playback
  • Back Focus Adjustment
• SENSOR MENU CONTROLS
  • Sensitivity
    • ISO Rating
      • MYSTERIUM
      • MYSTERIUM X
  • Color Temp
    • Auto WB
    • Tungsten
    • Daylight
    • Manual WB
    • Trim
      • Single Camera Configuration
      • Master / Slave Camera Configuration
        • TINT (Master Camera Tint Trim)
        • S TINT (Slave Camera Tint Trim)
        • S WBAL (Slave Camera White Balance Trim)
        • S FLUT (Slave Camera FLUT Trim)
  • Shutter Menu
    • Genlock
      • Genlock Icon
    • Mode
    • Speed
    • Syncro
    • Phase
  • Varispeed
    • Varispeed
    • Ramp
    • Frame Rate
    • Time
    • End Rate
  • Time-Lapse
    • Enable
    • Speed
    • Step Print
    • Interval
    • Burst Type
• AUDIO / VIDEO MENU CONTROLS
  • View
    • RAW
    • REDcolor
  • Video
    • Look
      • Clear
      • Import
      • Export
    • Color
      • Saturation
      • Exposure
      • Brightness
      • Contrast
      • Shadow
    • Gain
      • RED Gain
      • BLUE Gain
      • GREEN Gain
    • Tone
      • Curve
      • Define
      • TOE X
      • TOE Y
    • Flut
  • Viewfinder Menu
    • False Color (Previously Color)
      • Exposure
      • Focus (Previously Edge Highlight)
      • Video (Previously False Color)
    • Meter
      • Spot Meter
      • RGB Hist
      • RAW Level Meter
      • RAW Clip Meter
      • RAW Noise Level Bar
      • RAW Clip Level Bar
      • Under and Over Exposure Example
    • Assists
      • Waveform
      • RGB Parade
      • Focus Assist
      • Focus Overlay
    • Zebras
      • Configure 1
      • Enable 1
      • Configure 2
      • Enable 2
    • Intensity (Previously Dark Detail)
    • Open Gate
  • Audio
    • Line Level Inputs
    • Microphone Level Inputs
  • Headphone
    • Volume (Master)
    • Volume Left
    • Volume Right
    • Mix
• SYSTEM MENU CONTROLS
  • Sound
    • REC Enable
    • Output Level
    • 48V MIC
  • Media
    • Pre-Record
    • Unmount
    • Format
    • Change
    • Reset
  • Project
    • Status
      • View
      • Save
      • Recall
    • Slate
      • Camera
    • Configure
      • Resolution
      • Time Base
      • Quality
      • Valid Settings
    • Timecode
      • Jam Sync
        • Chain Link Icon
      • Output
      • Cross
        • Generate
        • Jam
      • Display
        • Edge-Code
        • Time-Code
      • Timezone
    • QT Proxies
  • Monitor
    • Frame Guide
      • Frame Guide
      • Frame Guide Enable
      • Safety (Previously Protect)
      • Safety Enable (Previously Protect Enable)
      • Custom (Previously Program)
        • Look Around
        • Cursors
        • User Action
        • User Title
    • Preview
    • Test Signal
    • PVW Refresh (Formerly HD-SDI)
      • HDMI
    • EVF Refresh
  • Setup
    • Preferences
      • User Profile
        • Clear
        • Import
        • Export
      • Key-Map
        • Side Record
        • User Keys (Setting Action)
      • GPIO
        • Input A/B
        • Output A/B
        • Polarity
      • Playback
        • HD-SDI
        • Look
      • Display
        • Status (Previously Shutter)
        • Lens Data
        • EVF Menu
        • Meters (Previously Status)
        • Grey Scale
    • Maintenance
      • Fan
        • Auto
        • Variable
        • Hot
        • Standard
        • Quiet
        • Silent
      • Black Shading
        • Start
        • Restore
      • Restore
        • Look
        • User
        • System
      • Update SW
      • Write Log
    • Setting System Clock
      • Set Date
        • Year
        • Month
        • Day
      • Set Time
        • Hours
        • Minutes
        • Seconds
      • Set Clock
    • Remote
      • Remote Port
        • S4/i
        • Aux 232
      • Lens Port
    • Program
      • Position
      • HD-SDI
      • Video
        • Normal
        • Flip H
        • Flip V
        • Flip H+V
      • Feed
        • Menu
        • Clean
        • Tally
        • Talent
        • Operator
• APPENDIX A: UPGRADING CAMERA FIRMWARE
  • Verify Current Camera Firmware
  • Upgrade Procedure
• APPENDIX B: MANAGING DIGITAL MEDIA
  • Media types
  • Formatting Media
  • Re-formatting Media
  • Media Capacity Remaining Status
  • Remove Media from Camera (Unmount)
    • Procedure A
    • Procedure B
    • Procedure C
  • Copying Media
  • Erasing Media Using Macintosh OS X
  • Erasing Media Using Windows
  • SD Memory Card / USB Memory Devices
    • SD Memory Card
    • USB Memory Device
• APPENDIX C: SAVING LOOK / USER PROFILE
  • Look
    • Export Look
    • Import Look
  • User Profile
    • Export User Profile
    • Import User Profile
  • Data Not Saved During Export
• APPENDIX D: INPUT / OUTPUT CONNECTORS
  • Right Side of Camera
    • Timecode Input / Output
    • Aux / RS232 Port
    • Viewfinder (RED EVF) Interface
    • Monitor (RED LCD) Interface
    • Line Level / Microphone Level Audio Inputs
      • Microphone Level Audio Inputs
    • Line Audio Output
    • Headphone Audio Output
    • USB-2 Master
      • Supported commands
    • USB-2 Slave
    • Genlock Input
    • Program (Dual-link) HD-SDI
    • Preview HD-SDI
    • HDMI
  • Rear of Camera
    • DC Power Input
    • Drive Interface
    • Auxiliary Power Outputs
• APPENDIX E: MASTER / SLAVE CAMERA CONFIGURATION
  • Preparation
  • Connecting
    • Jam SYNC
    • Genlock
  • Operation
    • Setup
    • Formtatting Media
    • Recording
  • Clip Naming Conventions
    • Camera Position / Slate / Camera ID
• APPENDIX F: EXPOSURE TIPS – USING FALSE COLOR AND ISO
  • Underexposure (~ 2 stops)
  • Overexposure (~ 2 stops)
  • Appropriate Exposure
  • Adjusting the ISO Rating
• APPENDIX G: POST PRODUCTION
  • Software Tools
    • RED QuickTimecodec
    • REDCINE-X®
• APPENDIX H: POSSIBLE ERRORS, ISSUES AND SOLUTIONS
• APPENDIX I: ACCESSORY OPTIONS
• APPENDIX J: MENU MAPS
  • Sensor / Video Menu
  • System Menu
    • 1 of 2
    • 2 of 2