Reflying Electronic AW002-PB Dual Charge Power Bank User Manual 1

Shenzhen Reflying Electronic Co., Ltd. Dual Charge Power Bank 1

User Manual

Download: Reflying Electronic AW002-PB Dual Charge Power Bank User Manual                      1
Mirror Download [FCC.gov]Reflying Electronic AW002-PB Dual Charge Power Bank User Manual                      1
Document ID3768668
Application IDsAxSL8y+4Q7cEVi51GG3CA==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize149.71kB (1871326 bits)
Date Submitted2018-03-05 00:00:00
Date Available2018-03-05 00:00:00
Creation Date2017-07-24 17:24:08
Producing SoftwareCorel PDF Engine Version 16.1.0.843
Document Lastmod2018-01-22 17:05:42
Document Title未命名 -1
Document CreatorCorelDRAW X6
Document Author: Administrator

Dual Charge Power Bank
1.Layout
2.Description of Operation
1. Wireless charging modul
2. Power button
3. Status LEDs
4. Micro-USB Charging port
5. USB output for charge other mobile devices
Thank you for your purchase of this product.
Please read this Quick Start Guide before
using your product.
Before the first use
Please take care when using the device.
Please charge the Portable Backup Battery and Charger fully before use. The
LEDs indicate the charge status during charging and light up continuously when
charging is complete.
This device is not a toy.
Using the Portable Backup Battery and Charger
Keep the device away from humidity and water.
1). Place your Apple Watch in the center of the wireless charging module and
make sure that is has been detected by the magnetic field.
2). Press the power button on the Portable Backup Battery and Charger fully.
3). The charging process will begin.
4). USB output for charge other mobile devices.
materials.
3. Technical specifications
5.Warnings
Size:
Weight:
Capacity:
Input voltage:
Operating temperature(surroundings):
117x39.5x24.5mm
180g
5200mAh
5V , 2.1A
-20℃ -> +60℃
Keep the device away from children and persons under 18.
Do not use the device in areas at risk of explosion or near flammable
It is strictly prohibited to modify, disassemble or repair the device.
Do not expose the device to extreme heat.
Do not store the device in areas where the temperature exceeds 70℃.
Only use and charge the device in areas with a temperature of between
-20℃ and +60℃.
In rare cases the battery may leak. In this case, keep the fluid away from
the skin or your have any other symptoms, contact a doctor immediately.
When the battery has reached the end of its life, dispose of the device
4.Features
1). Charge your Apple Watch anywhere at any time.
2). The built-in energy saving circuit prevents the Portable Backup Battery and
Charger from autonomously discharging by automatically turning it off after
30s without use.
3). The built-in wireless charging module is the same as the module that you
received with your Apple Watch. (Original Apple product)
4). The Portable Backup Battery and Charger can be used for both the 38mm
and 42mm versions of the Apple Watch.
5). The Portable Backup Battery and Charger works with the Apple Watch series
1 & 2.
6). Intellgent protection,with overcharge protection,overdischarge protection,
over current protection,short current protection.
properly.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 18 of the FCC Rules. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.”

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Create Date                     : 2017:07:24 17:24:08+08:00
Creator Tool                    : CorelDRAW X6
Modify Date                     : 2018:01:22 17:05:42+08:00
Metadata Date                   : 2018:01:22 17:05:42+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 192
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 9892 bytes, use -b option to extract)
Producer                        : Corel PDF Engine Version 16.1.0.843
Format                          : application/pdf
Creator                         : Administrator
Title                           : 未命名 -1
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 376.218724
Max Page Size H                 : 154.508915
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, Arial-BoldMT, AdobeSongStd-Light, MicrosoftYaHei
Font Family                     : Arial, Arial MT, Adobe 宋体 Std, 微软雅黑
Font Face                       : Regular, Bold, L, Regular
Font Type                       : Open Type, Open Type, Open Type, Open Type
Font Version                    : Version 3.00, 001.001, Version 5.002;PS 5.002;hotconv 1.0.49;makeotf.lib2.0.15106, Version 6.02
Font Composite                  : False, False, False, False
Font File Name                  : Arial_0.ttf, Arial-BoldMT.otf, AdobeSongStd-Light.otf, msyh.ttf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Rendition Class                 : proof:pdf
Document ID                     : uuid:cf7253cf-299b-4e62-90d3-622116e1f85f
Instance ID                     : uuid:6d40eb13-e206-4020-8542-6303c9361393
Page Count                      : 1
For                             : Administrator,
Bounding Box                    : 105 -358 1071 364
Container Version               : 11
Creator Version                 : 16
Author                          : Administrator
EXIF Metadata provided by EXIF.tools
FCC ID Filing: A7M-AW002-PB

Navigation menu