Remotesolution CRB76B IR&RF; Remote User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2381552
Application ID	yY9S3NidjZ4Osto2H7POqA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.36kB (917008 bits)
Date Submitted	2014-09-08 00:00:00
Date Available	2015-03-07 00:00:00
Creation Date	2014-08-21 17:00:59
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2014-08-22 12:28:17
Document Title	User Manual
Document Creator	Adobe InDesign CC 2014 (Macintosh)

1 Meet Your Remote
2 Turn On Your Remote
Status LED
TV Power
All Power
Your remote arrives with the AA batteries already installed,
but not activated. Here is how to power it on for the first time.
3 Pair Remote for “Aim Anywhere” Control
4 Control Your TV’s Power and Volume
Remote with Aim Anywhere
A Pick up your remote and remove the “Pull” tab
(on back) by pulling away from the remote. The
Status LED will blink green four times as the remote
powers up (about 5 seconds).
Search
XFINITY / Menu
Access Guide, Saved,
XFINITY On Demand, Apps,
Search and Settings.
Discover content by
channel, program or key
words.
A Press and hold the Setup button (about 3 seconds)
until the Status LED changes from red to green.
B Press the XFINITY button.
B Press and hold the Setup button (about
3 seconds) until the Status LED changes
from red to green.
Back
B Turn on your TV.
C Turn on your set-top box.
C Follow the on-screen instructions to enter the 3-digit
code that appears.
C Enter in the first 5-digit code for your TV
manufacturer. The Status LED should
blink green twice.
Once the code is correctly entered, your XFINITY
Remote is paired with the device.
Number Keys
Use predicitve text (T9) to
quickly search for content.
Setup
Program remote for Aim
Anywhere or to control your
TV or audio device.
TV Input
Changes to the next
available input on your TV
(if programmed in Step 4)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not used in accordance with
the instructions, may cause harmful interference to radio
communications.
Control your set-top box without having to point at it, even
when it is inside a cabinet or entertainment center.
A Using the list on the right, find the first
5-digit code for your TV manufacturer.
Start
FCC Compliance Statement
Not working? Make sure the battery tab from
your remote is removed, your TV is on and you are
entering the correct 3-digit code on your TV screen.
Need to remove Aim Anywhere control? Press
and hold the Setup button on the remote until the
status LED changes from red to green. Press A on
the remote. If the status LED blinks green twice,
you have successfully removed Aim Anywhere.
D Verify that the code was accepted by using
your remote to adjust volume and turn the
TV on and off.
Not working? Try the second code listed. Still
not working? Visit xfinity.com/remotes for a
complete list of manufacturer codes.
Popular Manufacturer Codes
LG
10178, 11265
Panasonic
10051, 10250
Samsung
10812, 10060
Sanyo
10154, 10159
Sony
10000, 11100
Sharp
10093, 10165
Toshiba
10156, 11156
Vizio
11758, 11756
If your code isn’t listed or you
would like to control an audio
device, visit xfinity.com/remotes.
There is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is
encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
•
Reorient or relocate the receiving antenna.
Increase or decrease the separation between the
equipment and receiver.
Connect the equipment into an outlet on a circuit
different from that which the receiver is connected.
Consult the dealer or an experienced remote control/
TV technician for help.
It is strongly recommended that the TV be plugged
into a separate wall outlet.
The user is cautioned that changes and modifications made to
this equipment without the approval of the manufacturer could
void the user’s authority to operate this equipment.
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
“Caution” : Exposure to Radio Frequency Radiation. Antenna
shall be mounted in such a manner to minimize the potential
for human contact during operation to avoid the possibility of
exceeding the FCC radio frequency exposure limit.
Radio Exposure Statement: This equipment complies with the
FCC radiation exposure limits set forth for devices operating
in an uncontrolled environment. This equipment should be
operated with a minimum distance of 2 cm between the
radiator and front of face.
1 Conozca su control remoto
2 Encienda su control remoto
Luz LED de estado
Encendido
de televisor
Todo encendido
Su control remoto se le entrega con baterías AA ya instaladas,
pero no activado. A continuación se muestra cómo debe
encenderlo la primera vez.
Inicio
Control remoto con Aim Anywhere
A Tome su control remoto y quite la pestaña “Pull”
(situada en la parte posterior) separándola del
control remoto. La luz LED de estado parpadeará en
verde cuatro veces mientras se enciende el control
remoto (unos 5 segundos).
Buscar
XFINITY/Menú
Acceda a guía, guardados,
XFINITY On Demand, Apps,
búsqueda y configuración.
Busque contenido por
canal, programa o palabras
clave.
C Encienda su decodificador.
Use el texto predictivo (T9)
para buscar contenido con
rapidez/facilidad.
Configuración
Entrada de TV
​ rograme el control remoto
para Aim Anywhere o
controle su TV o equipo
de audio.
​ ambios para la siguiente
entrada disponible en su
televisor (si se programó en
el paso 4).
“Aim Anywhere”
4 Controle el encendido y el volumen
del televisor
Controle su decodificador sin tener que apuntar hacia él, incluso
si está dentro de un armario o en un centro de entretenimiento.
A Mantenga presionado el botón Setup unos 3
segundos, hasta que la luz LED de estado cambie de
rojo a verde.
B Presione el botón XFINITY.
A Encuentre en la lista de la derecha
el primer código de 5 dígitos
correspondiente al fabricante de su
televisor.
B Mantenga presionado el botón Setup
unos 3 segundos, hasta que la luz LED de
estado cambie de rojo a verde.
Back
B Encienda su televisor.
Teclas de números
3 Sincronice el control remoto para controlar
C Siga las instrucciones en pantalla para ingresar el
código de 3 dígitos que aparece.
Una vez que el código se haya ingresado
correctamente, su control remoto de XFINITY queda
sincronizado con el aparato.
¿No funciona? Asegúrese de que ha retirado la
pestaña junto a las baterías de su control remoto,
su TV está encendido y ha ingresado el código de 3
dígitos correctamente en la pantalla del televisor.
¿Necesita eliminar el control Aim Anywhere?
Mantenga presionado el botón Setup del control
remoto hasta que la luz LED de estado cambie de
rojo a verde. Presione A en el control remoto. Si la
luz LED de estado parpadea dos veces en color
verde, eliminó satisfactoriamente el control Aim
Anywhere.
C Ingrese el primer código de 5 dígitos
correspondiente al fabricante. La luz LED
de estado debe parpadear en color
verde dos veces.
D Verifique que el código ha sido aceptado
usando su control remoto para ajustar
el volumen y encender y apagar el
televisor.
¿No funciona? Pruebe el segundo código de
la lista. ¿Aún no funciona? Visite xfinity.com/
remotes para una obtener lista completa de
códigos de fabricantes.
Códigos de fabricantes más comunes
LG
10178, 11265
Panasonic
10051, 10250
Samsung
10812, 10060
Sanyo
10154, 10159
Sony
10000, 11100
Sharp
10093, 10165
Toshiba
10156, 11156
Vizio
11758, 11756
Need help?
Visit xfinity.com/xtv
Si su código no está en la lista o le gustaría
controlar un equipo de audio, visite xfinity.com/
remotes.
Keep for future reference, but if you
decide to toss, please recycle.
Get Started Guide v.1.0

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2014:08:21 17:00:59-04:00
Creator                         : Adobe InDesign CC 2014 (Macintosh)
Modify Date                     : 2014:08:22 12:28:17-04:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2014:08:22 12:28:17-04:00
Creator Tool                    : Adobe InDesign CC 2014 (Macintosh)
Instance ID                     : uuid:ac17fb5b-9e99-ca47-a4e6-067998a59a53
Original Document ID            : xmp.did:6ab54dac-4082-4aea-935d-3b38b1c7aec4
Document ID                     : xmp.id:ea3c1151-84a5-44bc-bd8f-f2ad34d0347b
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:d5de886e-441c-4142-a095-13eca85270cc
Derived From Document ID        : xmp.did:834b410a-b365-4c2a-9337-7964a2a0d696
Derived From Original Document ID: xmp.did:6ab54dac-4082-4aea-935d-3b38b1c7aec4
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2014 (Macintosh)
History Changed                 : /
History When                    : 2014:08:21 17:00:59-04:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 11.0
Trapped                         : False
Page Count                      : 2

EXIF Metadata provided by EXIF.tools