Renesas Emulator Mcu Board For 38D5 Group M38D59T Rlfs Users Manual User’s

M38D59T-RLFS to the manual 214a89a7-030c-4a98-ac08-077e79d6c143

: Renesas Renesas-Emulator-Mcu-Board-For-38D5-Group-M38D59T-Rlfs-Users-Manual-523676 renesas-emulator-mcu-board-for-38d5-group-m38d59t-rlfs-users-manual-523676 renesas pdf

Open the PDF directly: View PDF .
Page Count: 4

M38D59T-RLFS

Emulator MCU Board for 38D5 Group

User’s Manual

Keep safety first in your circuit designs!

 Renesas Technology Corporation and Renesas Solutions Corporation put the maximum effort into making semiconductor products

better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to

personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with

appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention

against any malfunction or mishap.

Notes regarding these materials

 These materials are intended as a reference to assist our customers in the selection of the Renesas Technology product best suited

to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to

Renesas Technology Corporation, Renesas Solutions Corporation or a third party.

 Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any damage, or infringement of

any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application

examples contained in these materials.

 All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information

on products at the time of publication of these materials, and are subject to change by Renesas Technology Corporation and

Renesas Solutions Corporation without notice due to product improvements or other reasons. It is therefore recommended that

customers contact Renesas Technology Corporation, Renesas Solutions Corporation or an authorized Renesas Technology product

distributor for the latest product information before purchasing a product listed herein. The information described here may contain

technical inaccuracies or typographical errors. Renesas Technology Corporation and Renesas Solutions Corporation assume no

responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information

published by Renesas Technology Corporation and Renesas Solutions Corporation by various means, including the Renesas home

page (http://www.renesas.com).

 When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and

algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the

information and products. Renesas Technology Corporation and Renesas Solutions Corporation assume no responsibility for any

damage, liability or other loss resulting from the information contained herein.

 Renesas Technology semiconductors are not designed or manufactured for use in a device or system that is used under

circumstances in which human life is potentially at stake. Please contact Renesas Technology Corporation, Renesas Solutions

Corporation or an authorized Renesas Technology product distributor when considering the use of a product contained herein for any

specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use.

 The prior written approval of Renesas Technology Corporation and Renesas Solutions Corporation is necessary to reprint or

reproduce in whole or in part these materials.

 If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from

the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport

contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited.

 Please contact Renesas Technology Corporation or Renesas Solutions Corporation for further details on these materials or the

products contained therein.

Precautions to be taken when using this product

 This product is a development supporting unit for use in your program development and evaluation stages. In mass-producing your

program you have finished developing, be sure to make a judgment on your own risk that it can be put to practical use by performing

integration test, evaluation, or some experiment else.

 In no event shall Renesas Solutions Corporation be liable for any consequence arising from the use of this product.

 Renesas Solutions Corporation strives to renovate or provide a workaround for product malfunction at some charge or without charge.

However, this does not necessarily mean that Renesas Solutions Corporation guarantees the renovation or the provision under any

circumstances.

 This product has been developed by assuming its use for program development and evaluation in laboratories. Therefore, it does not

fall under the application of Electrical Appliance and Material Safety Law and protection against electromagnetic interference when

used in Japan.

CAUTION If the requirements shown in the "CAUTION" sentences are ignored,

the equipment may cause personal injury or damage to the products.

Renesas Tools Homepage http://www.renesas.com/en/tools

Rev.2.00

Nov. 01, 2005

REJ10J1014-0200

(1/4)

1. Outline

The M38D59T-RLFS is an emulator MCU board for the 38D5

Group.

2. Package Components (See Figure 1)

(1) M38D59T-RLFS......................................................... 1 pc.

(2) M3T-F160-80LCC converter board (preinstalled) ...... 1 pc.

(3) M38D59T-RLFS User's Manual (This manual).......... 1 pc.

(4) M38D59T-RLFS User's Manual (Japanese)................ 1 pc.

3. Specifications

Table 1 Specifications

Emulator M38000T2-CPE

PC4701 + M38000TL2-FPD

Operation mode Single-chip mode

Max. operating

frequency

Vcc = 4.5 to 5.5 V: 12.5 MHz (frequency/2 mode)

Vcc = 4.0 to 5.5 V: 8.0 MHz (frequency/2 mode)

Vcc = 2.5 to 5.5 V: 12.5 MHz (frequency/4 mode)

Vcc = 2.0 to 5.5 V: 8.0 MHz (frequency/4 mode)

Vcc = 1.8 to 5.5 V: 5.0 MHz (frequency/4 mode)

Vcc = 2.5 to 5.5 V: 12.5 MHz (frequency/8 mode)

Vcc = 2.0 to 5.5 V: 8.0 MHz (frequency/8 mode)

Vcc = 1.8 to 5.5 V: 5.0 MHz (frequency/8 mode)

Vcc = 1.8 to 5.5 V: Low-speed mode

Operating power

voltage 1.8 to 5.5 V

4. Connection Procedure (See Figure 2)

The procedure for connecting the M38D59T-RLFS is shown

below.

(1) Mount an LCC socket on the user system.

(2) Attach the M3T-F160-80LCC to the M38D59T-RLFS

(preinstalled).

(3) Attach the tip of the probe of the emulator to the

M38D59T-RLFS.

(4) Attach the M3T-F160-80LCC to the LCC socket.

Before using the M38D59T-RLFS, be sure to read "7.

Precautions" on page 4.

M3T-F160-80LCC

M38D59T-RLFS

Figure 1 Package components of the M38D59T-RLFS

(3)

(2)

LCC socket

(4)

M3T - F160- 80 LCC

M38D59T-RLFS

Emulator

80-pin 0.8-mm-pitch

(80P6N-A) foot pattern

(1)

●: No. 1 pin

Be sure to adjust the positions of the No. 1 pin

of foot pattern and each part.

Figure 2 Connection procedure of the M38D59T-RLFS

(2/4)

(3/4)

5. Oscillator Circuit (See Figure 3)

This product has two oscillator circuit patterns for the main clock XIN and sub-clock XCIN.

Select one of them according to the oscillator circuitry of the user system.

(1) When using the internal oscillator circuit of the MCU:

The oscillator circuit on the user system may not oscillate because a converter board is used between the emulator MCU and the

user system. In this case, set the jumper switch to INT and mount an oscillator circuit on the M38D59T-RLFS’s oscillator circuit

pattern. When using the oscillator circuit on the user system, be sure to set the jumper switch to EXT.

(2) When using an oscillator module IC etc. (self-oscillation):

It is not necessary to mount an oscillator circuit on the M38D59T-RLFS’s oscillator circuit pattern.

C3 C4 X1X2

R4

C1 C2

R3

XCIN XCOUT XIN XOUT

IC1

CN2-3a(P60)

CN2-2b(P61)

CN2-4a(XIN)

CN2-4b(XOUT)

CN1,CN2

VCC CN2-5a(VCC)

TP1

RESET

CN2-2a(RESET*)

CN2-3b(VSS)

TP3

VCC

TP2

GND

+

JP3 JP4 JP1 JP2

R2

C5

RESET*

R1

EXT

INT

EXT

INT

EXT

INT

EXT

INT

Figure 3 Oscillator circuit diagram

6. Oscillator Circuit Pattern

X1

C1 C2

R2

JP2 XOUTJP1 XIN JP3 XCIN JP4 XCOUT

X2

C4

R3

R4

C3

INT EXT INT EXT INT EXT INT EXT

For 3-terminal oscillator

For 2-terminal oscillator

Figure 4 Oscillator circuit pattern

(4/4)

7. Precautions

IMPORTANT

Notes on This Product:

 We cannot accept any request for repair.

 When using the oscillator circuit on the M38D59T-RLFS, check the output waveform of pins Xout and Xcout by an

oscilloscope.

 When mounting an oscillator circuit on the M38D59T-RLFS, make sure that 2 mm or more of a DIP pin does not

appear on the rear face (solder side). It may be short-circuited with the DIP pin of the converter board.

 For inquiries about the product or the contents of this manual, contact your local distributor.

Renesas Tools Homepage http://www.renesas.com/en/tools

8. External Dimensions

64.0

45.0

5.4

9.2

12.5

CN2

VCCGNDRESET +

R1

C6

C5

R5R6

Figure 5 External dimensions

9. Connecting to the User System

M38D59T - RLFS

80-pin 0.8-mm-pitch

PRQP0080GB-A (80P6N-A)

LCC socket

(not incluede)

80-pin 0.8-mm-pitch

PRQP0080GB-A (80P6N-A) 80-pin 0.5-mm-pitch

PLQP0080KB-A (80P6Q-A)

M3T-F160-80LCC

(included)

M3T-F160-80NRA

(not included) M3T-F160-80NSD

(not included)

Figure 6 Connecting to the user system