Reo link Digital Technology RLC-411WS WiFi IP Camera User Manual BCTC 170401623E 2ALYRHG F02B NII report

Shenzhen Reo-link Digital Technology Co., Ltd WiFi IP Camera BCTC 170401623E 2ALYRHG F02B NII report

User Manual

For advanced setup, please download the user manual:https://reolink.com/software-and-manual/For more troubleshooting, please go to FAQs on our website:https://reolink.com/faqs/For other technical support, please contact us atsupport@reolink.comTechnical SupportReolink C1 ProQuick Start GuideQG1_A
Welcome to ReolinkEasy Setup Within Minutes!
Camera Connection DiagramPower adapterRouterYour smartdeviceFor initial setup, please connect the camera to your router LAN port with an Ethernet cable, and then follow the steps below to set up your camera. Make sure that your camera and your smart devices are connected to the same router.Access the Camera bySmartphones
1. Scan the SSID.2. Double click the SSID which you choose. Enter the password.3. Click “Wi-Fi Test” to test the password.4. Press “Wi-Fi test”:a) If Wi-Fi test succeeds, please go to step 5.b) If Wi-Fi test fails, please check your Wi-Fi password and network connection, and then try again.5. Click “OK”.Device SettingsScan succeed!Device Settings Wifi SettingsWifi SettingsSSID ASUS 5G******SSIDPassword Show PasswordWi-Fi TestWi-Fi SignalWi-Fi TestOKScanASUS 5GTP-LINK_5G_F8F4ASUS 2.4G15243Remove the Ethernet cable and you can access the camera via Wi-Fi on computer now.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu