Resolution RE102 Slim Door/Window Sensor User Manual

Resolution Products, Inc. Slim Door/Window Sensor Users Manual

Users Manual

Resolution
RE102 Wireless Pencil DWS Transmitter
User and Installation Instructions
Version 0.1
Introduction
The RE102 Wireless Pencil DWS Transmitter is a wireless door/window sensor (DWS) for security
system applications. Typical use of this device is for protection of doors and windows against
intrusion.
The transmitter is activated by a Reed Switch input, which is activated by companion magnet.
The RE102 uses two common AAA alkaline batteries, designed to provide long battery life.
Transmitter Programming
Each RE102 Wireless Pencil DWS Transmitter is shipped with a unique serial number pre-programmed
into the transmitter. Upon installation, the RE102 must be programmed into the security control panel.
The control panel's documentation should be consulted for full instructions.
Specifications
Dimensions: 0.6 x 0.8 x 4”
RF transmission frequency: 319.5MHz
RF transmission frequency tolerance: +/- 75 kHz
Operating Temperature: 10º to 120ºF (-12º to 49ºC)
Battery Type: AAA Alkaline (2)
Battery Life: 10 years typical
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the Resolution Engineering, Inc. could void the
user's authority to operate this equipment.
FCC ID: U5X-RE102
IC Notice
This product meets the applicable Industry Canada technical specifications/Le présent materiel est
conforme aux specifications techniques applicables d’Industrie Canada.
IC: 8310A-RE102
Specifications subject to change without notice.

Navigation menu