Resolution RE103 Security Pendant Panic Transmitter User Manual
Resolution Products, Inc. Security Pendant Panic Transmitter
User manual
Resolution RE103 Wireless Panic Transmitter User and Installation Instructions Introduction The RE103 Wireless Panic Transmitter is a wireless 1-button transmitter for security system use. Typical use of this device is for sending a panic alarm to the system. The transmitter is shown in Figure 1. Figure 1: RE103 Successful activation of the transmitter is indicated by a short, bright LED flash. The Wireless Panic Transmitter uses a small lithium coin cell battery, designed to provide long battery life. Transmitter Programming Each RE103 Wireless Panic Transmitter is shipped with a unique serial number pre-programmed into the transmitter. Upon installation, the RE103 must be programmed into the security control panel. The control panel's documentation should be consulted for full instructions. Specifications Dimensions: 1.125 x 1.5 x 0.5” RF transmission frequency: 319.5MHz Operating Temperature: 10º to 120ºF (-12º to 49ºC) Battery Type: CR2032 Lithium Coin Cell FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Engineering, Inc could void the user's authority to operate this equipment. FCC ID: U5X-RE103 IC Notice This product meets the applicable Industry Canada technical specifications/Le présent materiel est conforme aux specifications techniques applicables d’Industrie Canada. IC: 8310A-RE103
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 Language : en-US Creator : Writer Producer : OpenOffice.org 3.0 Create Date : 2009:07:02 15:58:29-05:00EXIF Metadata provided by EXIF.tools