Resolution RE122 Wireless Door Window Transmitter, 319MHz User Manual

Resolution Products, Inc. Wireless Door Window Transmitter, 319MHz

User Manual

RE122_GE-Compatible_NanoMax_InstructionsPage 1 of 2 31-Jul-14 24-Hour Tech Support Line: (715)808-0164 www.ResolutionProducts.com Wireless Security Solutions RE122 GE-Compatible NanoMax Door / Window Features • For sensing things that open or separate. • Magnet and Internal reed switch operation. • 1-inch magnet gap! • External Contact. • Cover tamper. • Strong, reliable RF signal. • 6+ year battery life on CR1632 battery. • Low Battery indication. Key Instructions • Battery “+” faces up. • Enrolling:  Place control panel in Learn Sensor Mode  Open cover to tamper device, or  Tamper enrollment signal can be sent by touching a magnet to the sensor 5 times within 5 seconds Operation • Magnetic and hardwire zone Alarm, when… … magnet is pulled away from reed switch or … hardwire changes to alarm. Tamper, when cover is opened. Supervisories, every hour. Specifications Magnet trip distance: 1 inch nominal Mounting fastener: 3M VHB (Very High Bond) Tape Replacement Battery: CR1632 Temperature Range: 0F to 120F Housing dimensions: 1.8 x .77 x .39 inches Specifications subject to change without notice. RE122_GE-Compatible_NanoMax_InstructionsPage 2 of 2 31-Jul-14 24-Hour Tech Support Line: (715)808-0164 www.ResolutionProducts.com Internal Picture Notices Warranty Resolution Products, Inc. will replace products that are defective in their first five (5) years. FCC Notice This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment. FCC ID: U5X-RE122 IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2)l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. IC: 8310A-RE122 External Contact Connection Magnetic Reed Switch Battery Bucket

Navigation menu