Resolution RE200-5 5 Button Keyfob User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3273624
Application ID	p85bgLyP/jRflA4EKlitaw==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	16.29kB (203587 bits)
Date Submitted	2017-01-31 00:00:00
Date Available	2017-01-31 00:00:00
Creation Date	2017-01-27 13:52:36
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-01-27 13:52:37
Document Title	User Manual
Document Creator	Adobe InDesign CC 2017 (Windows)

UID
LL
IN
STA
RE200-5 Honeywell Compatible Keyfob
Keyfob is a portable device used to remotely control a
security panel.
Features
• Support for up to 8 button functions
• Low battery indication
• 2 year warranty
Enroll by placing the panel into wireless enrollment mode
and pressing a keyfob button multiple times as instructed
by the panel’s installation manual. Alternately, the sensor
ID located on the back of the keyfob can be used to
manually enroll the keyfob.
Assign User
• For most security panels, keyfobs
must be assigned to a user to function
properly.
Loop Definitions
• Star = Loop 1
• Unlock = Loop 2
• Arm Away = Loop 3
• Arm Stay = Loop 4
Loop 3
Loop1
Loop 2
Loop 4
LED
To replace the battery, remove the screw on the back of
the keyfob and unsnap the back from the cover.
• After battery replacement, it may take
up to 10 button presses before the low
battery indication clears.
Pro Tips
Optional advanced button commands are sent by
pressing the lights button and another button at
the same time. Advanced button commands are
transmitted on a secondary ID which is the sensor’s
primary ID with the last digit replaced by a 1.
Advanced Button Commands
• Lights + Star = Loop 1
• Lights + Unlock = Loop 2
• Lights + Away = Loop 3
• Lights + Stay = Loop 4
Fob template programming on some panels requires
the STAY button (Loop 4) to be pressed to enroll the
Screw
keyfob.
Verify proper enrollment and operation using your security panel’s installation manual.
Specifications
Physical
Housing Dimensions
2.2 x 1.5 x 0.6 inches (5.6 x 3.8 x 1.4 centimeters)
Weight with Battery
0.66 ounces (19 grams)
Environmental
Operating Temperature
Maximum Humidity
32°F to 120°F (0°C to 49°C)
85% non-condensing relative humidity
Fob Specifications
Frequency
345 MHz
Replacement Battery
One Panasonic CR2032
Nominal Battery Life
5 years
Transmitted Indications
Low Battery
Certification
RE200-5
FCC, IC
Specifications subject to change without notice
WARRANTY
FCC NOTICE
IC NOTICE
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may be received,
including interference that may cause undesired operation.
Resolution Products, Inc. will replace products that are defective in This device complies with Part 15 of the FCC rules. Operation is
their first two (2) years.
subject to the following two conditions:
This device complies with Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
Changes or modifications not expressly approved by the Resolution
(1) This device may not cause interference, and
Products, Inc. could void the user’s authority to operate this
(2) This device must accept any interference, including interference equipment.
that may cause undesired operation of the device.
FCC ID: U5X-RE200-5
Le présent appareil est conforme aux cnr d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation TRADEMARKS
est autorisée aux deux conditions suivantes:
“Honeywell” is a trademark owned by Honeywell International, Inc.
(1) L’appareil ne doit pas produire de brouillage, et
Resolution Products, Inc. products will function with Honeywell
(2) L’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en systems. However, no Resolution product is produced by, endorsed
by, or is officially associated with Honeywell.
compromettre le fonctionnement.
IC: 8310A-RE2005
Resolution recommends verifying proper enrollment and operation,
per security panel installation instructions, at installation.
47-0016-02 • RevA • 2016-12-12
Tech Support Line (877) 260-5578
www.ResolutionProducts.com

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42
Create Date                     : 2017:01:27 13:52:36-06:00
Metadata Date                   : 2017:01:27 13:52:37-06:00
Modify Date                     : 2017:01:27 13:52:37-06:00
Creator Tool                    : Adobe InDesign CC 2017 (Windows)
Instance ID                     : uuid:3628f09b-b4bc-4dca-8955-c486de38b7d8
Original Document ID            : xmp.did:4f265460-22e0-4d44-80b2-09089cdf40a5
Document ID                     : xmp.id:ac627119-f397-554d-a09e-bad22aab10b6
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:e472a7c2-5b9b-384a-a307-53cd9dcb68e8
Derived From Document ID        : xmp.did:02cfd21c-0aba-3043-b510-448f41e7fa1c
Derived From Original Document ID: xmp.did:4f265460-22e0-4d44-80b2-09089cdf40a5
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CC 2017 (Windows)
History Changed                 : /
History When                    : 2017:01:27 13:52:36-06:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 15.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CC 2017 (Windows)

EXIF Metadata provided by EXIF.tools