Resolution RE201 Door/Window Transmitter User Manual Exhibit E RE201

Resolution Products, Inc. Door/Window Transmitter Exhibit E RE201

Exhibit E RE201 User Manual

ResolutionRE201 Wireless DWS TransmitterUser and Installation InstructionsIntroductionThe RE201 Wireless DWS Transmitter is a wireless door/window sensor (DWS) for security system applications. Typical use of this device is for protection of doors and windows against intrusion. The transmitter is activated by one of four inputs:•Reed Switch (activated by companion magnet)•Built-in Tamper Switch•External 1 •External 2The RE201 uses a common lithium CR123 battery, designed to provide long battery life. Transmitter ProgrammingEach RE101 Wireless DWS Transmitter is shipped with a unique serial number pre-programmed into the transmitter. Upon installation, the RE201 must be programmed into the security control panel. The control panel's documentation should be consulted for full instructions.External ContactsExternal contacts allow the connection of two normally-closed, unsupervised contacts to the outer terminals of the terminal block. Common wire for both contacts is connected to the middle terminal.
SpecificationsDimensions: 1 x 1.25 x 3”RF transmission frequency: 345.025MHzOperating Temperature: 10º to 120ºF (-12º to 49ºC)Battery Type: CR123 LithiumFCC NoticeThis device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:1. This device may not cause harmful interference.2. This device must accept any interference that may be received, including interference that may cause undesired operation.Changes or modifications not expressly approved by the Resolution Engineering, LLC could void the user's authority to operate this equipment.FCC ID: U5X-RE201

Navigation menu