Resolution RE218 Trident Environmental Sensor User Manual
Resolution Products, Inc. Trident Environmental Sensor
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3212945 |
| Application ID | WmVSY2zuPOQzkp9L06YIVw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 14.44kB (180502 bits) |
| Date Submitted | 2016-11-30 00:00:00 |
| Date Available | 2016-11-30 00:00:00 |
| Creation Date | 2016-11-23 14:42:46 |
| Producing Software | Adobe PDF Library 15.0 |
| Document Lastmod | 2016-11-25 11:41:04 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CC 2017 (Windows) |
UID LL IN STA RE218 Honeywell® Compatible Trident™ Environmental Sensor Trident is an integrated environmental sensor. It detects water and reports extreme temperature conditions. Features • • • • Titanium probes for unmatched corrosion immunity IP67 rated waterproof enclosure GORE® vent equalizes enclosure pressure 5 year warranty Enroll by placing the panel into wireless enrollment mode and removing the battery tabs or tampering the sensor. Loop Configuration • • • • Loop 1 = Heat Loop 2 = Flood Loop 3 = Freeze Loop 4 = Tamper Install by placing the sensor in the location requiring water or air temperature detection. If desired, the wall clip can be used to secure the Trident sensor. Optional Wall Clip Securing • Remove the Trident body from wall clip. • Secure wall clip to a wall surface withwith a #6a screw. #6 mounting • Example screw. securing locations are a wall, baseboard • or Example cupboard. securing locations: wall, baseboard or Wall Clip Detects water pooled under the sensor and reports extreme air temperature conditions. Temperature Trip Points • Heat larms when over 100.4° F (38° C) • Heat restores when under 96.8° F (36° C) • Freeze alarms when under 44.6° F (7° C) • Freeze restores when over 48.2° F (9° C) Mounting Screw Hole To replace the battery, insert a flat blade screwdriver into the front slot and twist. To reinstall the cover, align the rear latches and roll the cover forward until it snaps into place. Front slot Verify proper enrollment and operation using your control panel’s installation manual. Specifications Physical Housing Dimensions 2.43 x 2.48 x 1.17 inches (6.2 x 6.3 x 3 cm) Weight with Battery 1.34 ounces (38 grams) Mounting Fastener #6 screw (not provided) Environmental Operating Temperature 32 to 120 °F (0 to 49 °C) Maximum Humidity 85% non-condensing relative humidity Water Resistance IP67 rated (Waterproof for over 30 minutes at 1 meter depth) Sensor Specifications Frequency 345 MHz Replacement Battery Two Panasonic CR2032 Nominal Battery Life 10 years Battery Voltage 3.0 VDC (Nominal) 2.3 VDC (Low) Current Draw 20 mA (Maximum) 0.5 uA (Quiescent) Transmitted Indications Cover Tamper, Wall Tamper, Low Battery, Supervision Certification RE218 FCC, IC Specifications subject to change without notice. WARRANTY FCC NOTICE IC NOTICE This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference that may be received, including interference that may cause undesired operation. (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user’s authority to operate this equipment. Le présent appareil est conforme aux cnr d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: FCC ID: U5X-RE218 Resolution Products, Inc. will replace products that are defective in their first five (5) years. (1) L’appareil ne doit pas produire de brouillage, et (2) L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. IC: 8310A-RE218 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: TRADEMARKS “Honeywell” is a trademark owned by Honeywell International, Inc. Resolution Products, Inc. products will function with Honeywell systems. However, no Resolution product is produced by, endorsed by, or is officially associated with Honeywell. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. 47-0028-02 • RevA • 2016-11-10 Tech Support Line (877) 260-5578 www.ResolutionProducts.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c015 84.158975, 2016/02/13-02:40:29 Create Date : 2016:11:23 14:42:46-06:00 Metadata Date : 2016:11:25 11:41:04-06:00 Modify Date : 2016:11:25 11:41:04-06:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:62f05444-b374-4c42-9867-706b3aa6432f Original Document ID : xmp.did:44e2b0f0-c3c1-164d-b557-efe7684ac6e9 Document ID : xmp.id:95f7d420-b19d-3347-94f6-e9c037546004 Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8a0666fb-d75e-3941-a6b6-793dc7591c02 Derived From Document ID : xmp.did:44b37247-0855-3043-ad56-05ea7a980e25 Derived From Original Document ID: xmp.did:44e2b0f0-c3c1-164d-b557-efe7684ac6e9 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2016:11:23 14:42:46-06:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools