Resolution RE251 Wireless Hidden Keypad User Manual RE251 Honeywell Compat Hidden Panic

Resolution Products, Inc. Wireless Hidden Keypad RE251 Honeywell Compat Hidden Panic

User Manual

Download: Resolution RE251 Wireless Hidden Keypad User Manual RE251 Honeywell Compat Hidden Panic
Mirror Download [FCC.gov]Resolution RE251 Wireless Hidden Keypad User Manual RE251 Honeywell Compat Hidden Panic
Document ID1995907
Application IDvgNLmfCA58GUR3mUHvg82w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize27.16kB (339475 bits)
Date Submitted2013-06-19 00:00:00
Date Available2013-06-20 00:00:00
Creation Date2013-06-11 17:24:18
Producing SoftwareGPL Ghostscript 9.05
Document Lastmod2013-06-11 17:24:18
Document TitleRE251_Honeywell-Compat_Hidden_Panic
Document CreatorPDFCreator Version 1.5.0
Document Author: bseemann

Specifications
Crystal compatible operation
Not supervised.
Replacement Battery:
CR2032 Lithium / Manganese Dioxide
Temperature Range:
0F to 120F
Housing dimensions:
3 x 1.2 x 0.52 inches
Wireless
Security
Solutions
RE251 Honeywell & 2GIG-Compatible Hidden Panic
Specifications subject to change without notice.
Features
• Hidden mounting
• 1-button arming and disarming
• Large, easy-to-differentiate buttons
• Mounts in hidden locations via VHB® tape, or screws
• Strong, reliable RF signal.
• 4-6 year battery life on CR2032 battery.
Pictures
Battery Replacement
CR2032 Battery
+ Terminal up
Key Instructions
• Enrolling:
Refer to the Honeywell control unit installation manual.
Put the control panel in RF Learning mode.
• Each button (or “loop” – see picture) must be
enrolled as a separate zone.
• The Input Type is Button type “BR”.
• Press intended button until the Fob LED blinks. Wait
5 seconds and press same button again. Panel knows
what loop each button is when it is pressed (need
not be entered).
• After 2nd button press, Panel should indicate
successful learn.
…Or put the control panel in Serial Number entry mode
• Enter the Loop number associated with the intended
key.
• Enter the Serial Number of the device (located on a
label on the unit’s back).
Operation
Lock & Unlock buttons simultaneously for 3 seconds
Insert
Screwdriver here
to open
Panic Alarm.
Unlock
LOOP 2
Lock
Lock + Unlock
Panic (Enroll)
LOOP 1
LOOP 3
RE251_Honeywell-Compat_Hidden_Panic.docPage 1 of 3
www.ResolutionProducts.com
11-Jun-13
RE251_Honeywell-Compat_Hidden_Panic.docPage 2 of 3
www.ResolutionProducts.com
11-Jun-13
Notices
“GE”, “Honeywell”, “DSC”, “2GIG” and “Napco” are trademarks owned by General Electric
Company, Honeywell International Inc., Tyco Safety Products Canada LTD, 2GIG Technologies
Inc., and NAPCO Security Systems, Inc., respectively.
Resolution Products, Inc. products will function with one of either GE, Honeywell, DSC or
Napco systems. However, no Resolution product is produced by, endorsed by, nor is officially
associated with GE, Honeywell, DSC or Napco. Resolution recommends verifying proper
enrollment and operation, per control panel installation instructions, at installation.
Warranty
Resolution Products, Inc. will replace products that are defective in their first year.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Products, Inc. could
void the user's authority to operate this equipment.
FCC ID: U5X-RE252
IC Notice
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may
cause undesired operation of the device.
Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence.
Son fonctionnement est soumis aux deux conditions suivantes:
1. Ce dispositif ne peut causer des interférences, et
2. Ce dispositif doit accepter toute interférence, y compris les interférences
qui peuvent causer un mauvais fonctionnement du dispositif.
IC: 8310A-RE252
RE251_Honeywell-Compat_Hidden_Panic.docPage 3 of 3
www.ResolutionProducts.com
11-Jun-13

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2ab3d246-d541-11e2-0000-d6b0ea8ec654
Producer                        : GPL Ghostscript 9.05
Keywords                        : ()
Modify Date                     : 2013:06:11 17:24:18-05:00
Create Date                     : 2013:06:11 17:24:18-05:00
Creator Tool                    : PDFCreator Version 1.5.0
Document ID                     : uuid:2ab3d246-d541-11e2-0000-d6b0ea8ec654
Format                          : application/pdf
Title                           : RE251_Honeywell-Compat_Hidden_Panic
Creator                         : bseemann
Description                     : ()
Author                          : bseemann
Subject                         : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: U5X-RE251

Navigation menu