Resolution RE300-5 5 Button Keyfob User Manual
Resolution Products, Inc. 5 Button Keyfob
User Manual
UID LL IN STA RE300-5 DSC Compatible Keyfob Keyfob is a portable device used to remotely control a security system. Features • Supports for up to 8 button functions • Low battery indication • 5 year warranty Enroll by placing the panel into wireless enrollment mode and pressing a keyfob button multiple times as instructed by the panel installation manual. Alternately, sensor ID located on the back of the fob can be used to manually enroll the sensor. Assign User • For most security panels, keyfobs must be assigned to a user to function properly. To replace the battery, remove the screw on the back of the keyfob and unsnap the back from the cover. Away Star Unlock Lights Stay LED • After battery replacement, it may take up to 3 button presses before the low battery indication clears. Pro Tips Optional advanced button commands are sent by pressing the lights button and another button at the same time. Advanced button commands are transmitted on a secondary ID which is the sensor’s primary ID with the last digit replaced by a 1. Secondary ID Commands • Lights + Star = Star on secondary ID • Lights + Unlock= Unlock on secondary ID • Lights + Away = Arm away on secondary ID • Lights + Stay = Arm stay on secondary ID Screw Verify proper enrollment and operation using your control panel’s installation manual. Specifications Physical Housing Dimensions 2.2 x 1.5 x .6 inches (5.6 x 3.8 x 1.4 centimeters) Weight with Battery .66 ounces (19 grams) Environmental Operating Temperature Maximum Humidity 32°F to 120 °F (0 to 49 °C) 85% non-condensing relative humidity Sensor Specifications Frequency 433.92 MHz Replacement Battery One Panasonic CR2032 Nominal Battery Life 4 to 6 years Transmitted Indications Low Battery Certification RE300-5 FCC, IC Specifications subject to change without notice WARRANTY FCC NOTICE IC NOTICE (1) This device may not cause harmful interference. (2) This device must accept any interference that may be received, including interference that may cause undesired operation. Resolution Products, Inc. will replace products that are defective in their first five (5) years. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux cnr d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: (1) L’appareil ne doit pas produire de brouillage, et (2) L’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user’s authority to operate this equipment. FCC ID: U5X-RE300-5 TRADEMARKS DSC is a trademark owned by TYCO Safety Products Canada LTD. Resolution Products Inc. products will function with DSC systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with TYCO. Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation. IC: 8310A-RE3005 47-0016-03 • RevA • 2016-12-12 Tech Support Line (877) 260-5578 www.ResolutionProducts.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Language : en-US Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.6-c137 79.159768, 2016/08/11-13:24:42 Create Date : 2017:01:27 13:53:29-06:00 Metadata Date : 2017:01:27 13:53:30-06:00 Modify Date : 2017:01:27 13:53:30-06:00 Creator Tool : Adobe InDesign CC 2017 (Windows) Instance ID : uuid:9c6aada2-3145-43a8-bbb7-0360ec157a38 Original Document ID : xmp.did:4f265460-22e0-4d44-80b2-09089cdf40a5 Document ID : xmp.id:9b66a01b-94f3-4d47-a45d-aff380df2b6e Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:65eceee1-670a-9c4c-88ae-fca909ee03e7 Derived From Document ID : xmp.did:ab684fc1-e518-6249-a356-6bc4c7548fd2 Derived From Original Document ID: xmp.did:4f265460-22e0-4d44-80b2-09089cdf40a5 Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC 2017 (Windows) History Changed : / History When : 2017:01:27 13:53:29-06:00 Format : application/pdf Producer : Adobe PDF Library 15.0 Trapped : False Page Count : 2 Creator : Adobe InDesign CC 2017 (Windows)EXIF Metadata provided by EXIF.tools