Resolution RE403 Wireless Panic Transmitter, 315MHz User Manual RE403V Visonic Compat Panic

Resolution Products, Inc. Wireless Panic Transmitter, 315MHz RE403V Visonic Compat Panic

User Manual

RE403V_Visonic-Compat_Panic.doc  Page 1 of 2  22-Feb-13 www.ResolutionProducts.com    Wireless  Security  Solutions    RE403V Visonic®-Compatible Panic  Features  • Portable device for emergency initiation of system. • Single, red button with comfortable feel. • Fully sealed, water resistant housing. • Strong, reliable RF signal. • Comes with comfortable, elastic band for easy removability. • 4-6 year battery life.  Key Instructions • Enrolling:    Refer to the AMBER SELECT control unit installation manual.  Operation  User presses button in emergency. Unit will send low battery signals. Unit sends supervisory signals twice daily.   Press Red button  for Alarm SOLID LIGHT on button press = GOOD battery.  BLINKING LIGHT on button press = LOW battery RE403V_Visonic-Compat_Panic.doc  Page 2 of 2  22-Feb-13 www.ResolutionProducts.com  Specifications   Compatibly Replaces:  MCT-212 AMBER Button Function:     Press=Fault,  Release=Restore Supervisory signals:  sent every 12 hours    (although panel doesn’t listen for them). Battery:  Sealed in unit; not replaceable   Low battery signal sent upon detecting low battery Water resistant:  Not submersible, but tested to 1 meter depth Temperature Range:  0F to 120F Housing dimensions:  1.5x1.2x0.6 inches  Specifications subject to change without notice.  Notices  “GE”, “Honeywell”, “DSC”, and “Visonic” are trademarks owned by General Electric Company, Honeywell International Inc., Tyco Safety Products Canada LTD, and Visonic, LTD respectively.    Resolution Products, Inc. products will function with one of either GE, DSC, Visonic or Honeywell systems.  However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC.   Resolution recommends verifying proper enrollment and operation, per control panel installation instructions, at installation.  Warranty Resolution Products, Inc. will replace products that are defective in their first year.  FCC Notice This device complies with Part 15 of the FCC rules.  Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference that may be received, including interference that may cause undesired operation.   Changes or modifications not expressly approved by the Resolution Products, Inc. could void the user's authority to operate this equipment.  FCC ID: U5X-RE403   IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause interference, and  2. This device must accept any interference, including interference that may cause undesired operation of the device.   Cet appareil est conforme avec d’Industrie Canada RSS standard exempts de licence. Son fonctionnement est soumis aux deux conditions suivantes: 1. Ce dispositif ne peut causer des interférences, et 2. Ce dispositif doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais fonctionnement du dispositif.   IC: 8310A-RE403

Navigation menu