Resolution RE920A Home Automation Device User Manual 1

Download:
Mirror Download [FCC.gov]
Document ID	1680640
Application ID	spYb+K5K6cA5LvDv521k4w==
Document Description	User Manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	249.86kB (3123236 bits)
Date Submitted	2012-04-20 00:00:00
Date Available	2012-04-26 00:00:00
Creation Date	2012-04-13 14:25:48
Producing Software	OpenOffice.org 3.3
Document Lastmod	0000-00-00 00:00:00
Document Title	User Manual 1
Document Creator	Writer
Document Author:	bseemann

RE920 IP Module
Features
• Connects in daughterboard slot of SimonXT panel
• Allows reporting of alarm and status conditions over IP connection
• Allows control of system functions (arming, disarming, etc) over IP
connection
• Allows control of Zwave devices and wireless siren over IP connection
Key Instructions
• Install RE920 unit in slot at back of panel
• Power up the panel
• Connect ethernet cable
• Connect to configuration software and enter MAC address
• Configure RE920 to correct IP address for reporting
• Configure RE920 to correct IP address for system control
LED Operation
•
•
•
•
•
"L and S" LEDs are normal ethernet LEDs and indicate healthy ethernet
network connection
"Power" LED lights green when powered and shows heartbeat for
processor functioning correctly
"Local" LED lights when proper connection to local router established
"CS" LED lights when connected to Central Station
"Platform" LED lights when connected to interactive platform website
RE920_IP_Module_Manual.doc
Page 1 of 4
www.ResolutionProducts.com
07-Apr-12
Specifications
Panel Compatibility:
External supply:
Current draw:
PCB dimensions:
GE/Interlogix SimonXT
9-18V DC, at least 100mA.
60mA, normal operation.
1.9 x 4.1 inches
Specifications subject to change without notice.
Internal Picture
Printed Zwave Antenna
Factory Default Switch
Ethernet LEDs
Status LEDs
Ethernet Connector
Mounting Holes
RE920_IP_Module_Manual.doc
Page 2 of 4
www.ResolutionProducts.com
07-Apr-12
OEM Installation Instructions
The RE920 module is installed in the SimonXT host as follows:
1. The SimonXT should be powered down.
2. Expose the back of the panel as shown in the following picture.
3. The module is installed in the expansion slot on the left, as shown in the
picture.
4. Unwrap the module from its packaging and carefully slide the module
underneath the plastic tabs at the top of the expansion slot.
5. Gently press down on the bottom of the module so that it engages with
the connector on the panel.
6. Secure the module in place using four screws in the provided holes.
7. Attach ethernet cable to the connector and arrange it so that it exits the
enclosure with out strain.
8. Connect to the module using the configuration IP Address and configure
the module's IP Addresses and other information with the configuration
interface.
RE920_IP_Module_Manual.doc
Page 3 of 4
www.ResolutionProducts.com
07-Apr-12
Notices
“GE” is a trademark owned by General Electric Company. "Interlogix" is a trademark of UTC.
This Resolution product is not produced by, endorsed by, or officially associated with GE or
UTC. Resolution recommends verifying operation at installation.
This product is only usable with the GE/Interlogix SimonXT alarm panel.
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
This device may not cause harmful interference.
This device must accept any interference that may be received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the Resolution Engineering, Inc.
could void the user's authority to operate this equipment.
FCC ID: U5X-RE920A
RE920_IP_Module_Manual.doc
Page 4 of 4
www.ResolutionProducts.com
07-Apr-12

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
Language                        : en-US
Title                           : 
Author                          : bseemann
Creator                         : Writer
Producer                        : OpenOffice.org 3.3
Create Date                     : 2012:04:13 14:25:48-05:00

EXIF Metadata provided by EXIF.tools