Resolution RF245 Wireless Keychain Transmitter User Manual
Resolution Products, Inc. Wireless Keychain Transmitter
User Manual
![](/img.php?id=839816&img=bg1.png)
Resolution
RF245 Wireless Keychain Transmitter
User and Installation Instructions
Introduction
The RF245 Wireless Keychain Transmitter is a wireless 4-button transmitter for security system
control. Typical use of this device is for arming and disarming the system, as well as control of lights
and other devices. The transmitter's button layout is shown in Figure 1.
Figure 1: RF245 Button Layout
![](/img.php?id=839816&img=bg2.png)
In order to eliminate the possibility of false activations, buttons on the transmitter must be pressed for
at least ½ second before the transmitter activates. Successful activation of the transmitter is indicated
by a short, bright LED flash.
The Wireless Keychain Transmitter uses a small alkaline battery, designed to provide long battery life.
Transmitter Programming
Each RF245 Wireless Keychain Transmitter is shipped with a unique serial number pre-programmed
into the transmitter. Upon installation, the RF245 must be programmed into the security control panel.
Each button on the RF245 may be programmed for a different function, or “loop”, on the control panel.
The control panel's documentation should be consulted for full instructions.
Specifications
Dimensions: 1.3 x 2.35 x 0.5”
RF transmission frequency: 345MHz
Operating Temperature: 10º to 120ºF (-12º to 49ºC)
Battery Type: 27A 12V alkaline
FCC Notice
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference that may be received, including interference that may
cause undesired operation.
FCC ID: U5X-RF245