User manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3199064 |
| Application ID | Xkjpv4LJltWRdI0u7ECeIw== |
| Document Description | User manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 70.39kB (879929 bits) |
| Date Submitted | 2016-11-17 00:00:00 |
| Date Available | 2016-11-17 00:00:00 |
| Creation Date | 2016-11-15 18:00:44 |
| Producing Software | Adobe Acrobat 10.1.11 Image Conversion Plug-in |
| Document Lastmod | 2016-11-15 18:00:44 |
| Document Title | User manual |
| Document Creator | Adobe Acrobat 10.1.11 |
ETRFIX RETRFICTFIBLE BED COVERS Driver side rail (2) 10-24 Black flathead Allen Screws Passenger Side Rail —I (has "Green" sticker under rail) (4) 10-32 Screws (shinless) :1, Front Cover 1 Cab End Exploded View Manufactured in the USA Retrax 917 South 46th Street Grand Forks, ND 58201 Spiral Canister Table of Contents NOTE: Some models require specific steps and parts. Please check below; if your model is listed, follow the insructions on that pmel P: (701) 746-5596 F: 746-5598 ”$8533an QUide'ineS Pg- 1 www.retrax.com Steps 1-4 (cover assembly) Pg. 2 retrax@retrax.com Ste 5 5 & 6 P . 3 1-800—206-4070 (clarEp install & measurements) 9 Steps 7 & 8 Pg. 4 (adjustments & final steps) Maintenance & Use Pg. 5 Warranty Statement Pg. 6 POWERTRAX Pg. 7-8 Dodge Ram Box 2009-up Pg. 9-10 Honda Ridgeline 2006-2015 Pg. 11-13 Scan here 10 view a brief Nissan Frontier 2005-up Pg. 14 video on howto install a . . RETR AX cover. Nissan Titan 2004—2015 Pg. 15 Make sure that you have a Nissan Titan 2016-up Pg. 16 QR code reader application Toyota Tacoma 2005— 2015 Pg. 17 installed on Your Toyota Tacoma 2016-up Pg. 18-20 m anpmne' Toyota Tundra 2007-up Pg. 21 W] Deck Rail System POWERTFEES? Installation Use caution when cutting the wire ties holding the wire harness together so you do not out wires Inspect Wiring Do not install damaged wires as they could become a hazard. s lit wire loom . P Electronics LED lamp 2 Key fobs -transmitters Fuse holder (2) .10 Amp fuses . . Wire harness Electric Cover Accessory Packet 10) Wire ties STEP 1-3: Routing Wiring harness from battery to truck bed 1. Using a Wire tie, secure the fuse holder end of the wire harness nearthe battery (red wire and brown wire) ' Wiring Harness Routing Along Frame Rail 2. Route the wire harness to the driver side of the truck if it is not already. (Using wire ties, secure the wiring harness so it does not come into contact With movmg parts or exhaust pipes.) 3 Route the wiring harness down along the frame rails to thetruck box as shown on the right Keep the wires as high as possible to prevent damage while driving. Secure the Wiring harness With Wire ties every 2-3 feet STEP 4: Wiring Options OPTION 1: Route 24" of wire to driver side cab end of drain holes in the bed. Use split wire loom to wrap around the wires as a barrier between the wires and the drain tube hole. (NOTE: this may require a larger hole than normal.) OPTION 2: Route the wiring in the gap between the cab and truck bed (leave about 24” in truck bed). The wires Will be hidden under the front Weather- stripping of the RETRAX cover pOWERTRbUEB? Installation — Proceed with the RE TRAX standard instructions on steps 1-8 Then ’ refer back to this page for connection of wiring. Disregard all references to ‘Iock’ - Not applicable for POWERTRAX. NOTE: The electric cover has no lock assembly. Cover will not move out of the canister at this point of installation. STEP 5: Connect the wiring harness to electronics box and battery A. There is a white label wrapped with the letter “P" on it to ensure proper connections are made. (Ensure the connectors labeled P are securely connected. (Connectors labeled "M” MOtOF — M will come attached.) B. Connect the wires to the battery and install a fuse in the Power — P " fuse holder. The RED wire (with the fuse holder) to the POSITIVE post, and the BROWN wire will connect to the NEGATIVE post. For proper cover operation, ensure rails are Operation of the POWERTRAX positioned correctly (must be parallel). See step 6 & 7 in standard instructions). Hold to open These surfaces must be level A Press once to illuminate light (’41-? 7"-—\ _ > (auto shut off after 3-5 3‘— min utes) Hold to close NOTE: The RETRAX cover has superior quality rail weather-strip seals. The weather-strip seals will have an initial 48 hour break in period. Please inform the end user to help the cover to the tailgate each time the cover is opened for the first 48 hours or until it is able to close completely on its own. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Not/be: The changes or modifications 1701‘ expressly approved by the party responsible for compllauce could void the user ' s authority to operate the equmem‘. ( inzmncmmz asn :ovzfis 917 South 46th Street Grand Forks, ND 58201 P: (701) 746-5596 F: 746-5598 www.retrax.com retrax@retrax.com URTH Dwfll L 1-800-206-4070 1
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2016:11:15 18:00:44+08:00 Creator : Adobe Acrobat 10.1.11 Modify Date : 2016:11:15 18:00:44+08:00 Title : XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2016:11:15 18:00:44+08:00 Creator Tool : Adobe Acrobat 10.1.11 Format : application/pdf Document ID : uuid:3481d870-4ef2-4563-a036-ac4b0bd85899 Instance ID : uuid:04c292fe-2171-467e-be59-dcc4f2a9bf27 Producer : Adobe Acrobat 10.1.11 Image Conversion Plug-in Page Count : 4EXIF Metadata provided by EXIF.tools