Revolabs 01-FUSION4 Wireless Microphone Base Station (4 Channel) User Manual Manual
Revolabs Inc. Wireless Microphone Base Station (4 Channel) Manual
Revolabs >
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 930257 |
| Application ID | ZjGDQXPMIMnFgyVWeFgjwQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 81.51kB (1018852 bits) |
| Date Submitted | 2008-04-18 00:00:00 |
| Date Available | 2008-04-18 00:00:00 |
| Creation Date | 2008-04-17 16:00:37 |
| Producing Software | Acrobat Distiller 8.1.0 (Windows) |
| Document Lastmod | 2008-04-17 16:03:27 |
| Document Title | Manual |
| Document Creator | Acrobat PDFMaker 8.1 for Publisher |
| Document Author: | susanzaney |
Revolabs Fusion™ Wireless Microphone System Installation and User’s Guide Microphones must be fully charged and paired to the Charger Base prior to first use. Rev 1.1 Table of Contents Revolabs Fusion™ EUROPEAN COMPLIANCE This equipment has been approved in accordance with Council Directive 1999/5/EC “Radio Equipment and telecommunications Equipment. Conformity of the Equipment with the guidelines below is attested by the CE mark. Model Numbers: 01-8FUSIONEU-NM Revolabs Fusion Base Station, European 01-4FUSIONEU-NM Revolabs Fusion Base Station, European 01-8FUSIONEU-62 Revolabs Fusion System with 6 tabletop omni’s & 2 wearable mics, European 01-4FUSIONEU-31 Revolabs Fusion Base System with 3 tabletop omni’s & 1 wearable mics, European 03-EXEMICEU-BLK-11 Revolabs Solo™ Executive Microphone 03-EXECHGEU-STD-11 Revolabs Solo™ Executive Charger 05-TBLMICEU-OM-BLK-11 Revolabs Solo™ Executive Table Microphone Omni 05-TBLMICEU-DR-BLK-11 Revolabs Solo™ Executive Table Microphone Cardioid 06-XLRMICEU-OM-BLK-11 Revolabs Solo™ Executive XLR Microphone Adapter STANDARDS TO WHICH CONFORMITY IS DECLARED: RF ETSI EN 301 406 V 1.4.1 03/2001 EMC ETSI EN 301 489-6 v1.2.1 (2002-04) WEEE NOTIFICATION: The Waste Electrical and Electronic Equipment (WEEE) directive (2002/96/EC) is intended to promote recycling of electrical and electronic equipment and their components at end of life. Part Numbers Covered in This Document 8-Microphone System 01-8FUSION-NM or 01-8FUSIONEU-NM (No microphones) 01-8FUSION-62 or 01-8FUSIONEU-62 (6 omni tabletops/2 wearable) 4- Microphone System 2003/11/EC & 2002/95/EC “ROHS COMPLIANCE DIRECTIVE”: The products referenced herein are in compliance with the EU directive 2003/11/EC and EU directive 2002/95/EC. SAFETY COMPLIANCE TUV SUD AMERICA 01-4FUSION-NM or 01-4FUSIONEU-NM (No microphones) 01-4FUSION-31 or 01-4FUSIONEU-31 (3 omni tabletops/1 wearable) Page 2 Page 37 Installation Guide Revolabs Fusion™ INDUSTRY CANADA NOTICE TO USERS Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device. IC: 6455A-01FUSION IC; 6455A-01FUSION4 IC: 6455A-01EXEMIC Revolabs Fusion™ Base Station 8 microphones Revolabs Fusion™ Base Station 4 microphones Revolabs Solo™ Executive Microphone RESTRICTED USE WITH CERTAIN MEDICAL DEVICES Hearing Aids Some devices may interfere with some hearing aids. In the event of such interference, you may want to consult with your hearing aid manufacturer to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from RF energy. Your physician may be able to assist you in obtaining this information. EXPORT LAW ASSURANCES This product is controlled under the export regulations of the United States of America and Canada. The Governments of the United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the Canadian Department of Foreign Affairs and International Trade. The use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products. 01-FUSION-8CH-NA & 01-FUSION-4CH-NA North America UPCS Usage Restriction Due to the UPCS frequencies used, this product is licensed for operation only in the United States of America and Canada. 01-FUSION-8CH-EU & 01-FUSION-4CH-EU European Union Usage Restriction Due to the DECT frequencies used, this product is licensed for operation only in the European Union countries. Page 36 Great audio, wireless mobility, and simple to install! Simply plug the cable into the AV system or phone system and it works. No software configuration is necessary. Even the Fusion box is designed to be easy to use– vertically or horizontally. No equipment rack needed! Just set the Fusion system on the credenza! Video Conferencing Revolabs Fusion Wireless Microphone Solution includes all of the necessary cables to plug into any of the major video-conferencing solutions, including Lifesize, Polycom, Sony and Tandberg. It includes a remote control to control the sound volume in your conference room or in the conference room at the far end. Decide on where you want to put the Fusion system, whether you want to place it vertically or horizontally, plug in the cables and you are ready to have great wireless audio in any conference room! Audio Conferencing Plug the Fusion Wireless Microphone Solution into a telephone system and you are on your way to great wireless audio. There is a remote control dialer to dial the conference phone number and you may purchase new powered speakers or use existing powered speakers to hear the call. Decide on where you want to put the Fusion system, whether you want it vertical or horizontal, plug in the cables and you are ready to have great wireless audio in any conference room! Rechargeable These Wireless Microphone Systems have a rechargeable battery that provides eight hours of talk time after each full charge. Revolabs Wireless Microphones recharge to 85% capacity in approximately 45 minutes. Secure All of Revolabs Wireless Microphones use 128-bit encryption, so that no one can listen in. Page 3 Installation Guide Revolabs Fusion™ Contents of box: Fusion Base Station, Fusion Base Station vertical stand, AC power adapter for Base Station, four cables shown below, remote control, Charger Base, AC wall adapter for Charger Base, four or eight wireless microphones (optional). Optional boxes: Four or eight wireless microphones, Remote IR Sensor, speakers. CABLE A Speakers CABLE B Phone Cable CABLE C RCA NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. CABLE D XLR Fusion Set-up Decide if want to place Fusion Base Station horizontally or vertically on a flat surface. To set-up vertically, place the Fusion Base Station vertical stand on the bottom of the Fusion unit. Tighten bolt into Fusion Base Station. Fusion Base Station Placement WARNING: Do not put Fusion Base Station behind metal doors. If you are putting Fusion into a cabinet with non-metal doors, you need to use the Remote IR Sensor (part number 07-IRREMO-01) for remote to work. Plug the serial port end into the IR Remote port on the back Fusion panel, bring IR Sensor out of cabinet, and secure with Velcro. Power Plug power cord into the back of the Fusion Base Station and into wall outlet. Plug AC Adapter into the power outlet and the other end into the microphone Charger Base. Place wireless microphones in the Charger Base, let charge overnight or at least eight hours. Page 4 Page 35 Installation Guide Safety and General Information Please read the following information to ensure safe use of your Revolabs system. FCC User Information FCC Registration Number: 0014898290 FCC ID: T5V-01-FUSION Revolabs Fusion™ Base Station 8 microphones FCC ID: T5V-01-FUSION4 Revolabs Fusion™ Base Station 4 microphones FCC ID: T5V-01-EXEMIC Revolabs Solo™ Executive Microphone FCC NOTICE TO USERS Users are not permitted to make changes or modify the equipment in any way. Changes or modifications not expressly approved by Revolabs, Inc. could void the user’s authority to operate the equipment. To meet FCC and Industry Canada RF radiation exposure limits for general population (uncontrolled exposure), a minimum of 7.9 inches (20 cm) separation distance must be maintained between the Fusion Base Station and users' and/or nearby persons' bodies at all times. Additionally, the Fusion Base Station must not be co-located with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This product has been found to comply with the Rules of 47 CFR Part 68 of the Federal Communications Commission and Technical Requirements For Connection of Terminal Equipment to the Telephone Network TIA-968-A-1, A2 and A-3. Certificate Number: US:6RMBR00BNEXIATC Date: April 14, 2006 IMPORTANT NOTE: FEDERAL COMMUNICATIONS COMMISSION (FCC) RADIATION EXPOSURE STATEMENT This equipment complies with FCC radiation exposure limits for an uncontrolled environment. Page 34 Revolabs Fusion™ Audio Conferencing Plug Cable A (single RCA to double RCA) single RCA connector into Fusion Base StationRCA port, and then plug the double RCA connectors into the speakers. Plug speakers into wall outlet. Must be powered speakers or a powered amplifier. Plug one end of Cable B, the phone line cable, into the Fusion Base Station , plug other end into phone jack. Dial with the remote. If you ordered 01-8FUSION-62 6 omni tabletops/2 wearable microphones or 01-4FUSION-31 3 omni tabletops/1 wearable microphone. You are all set to go! Take out the Wireless Microphones, unmute them by pressing the mute button on the microphone and the system is ready for a conference! If you selected your microphones separately with the 01-8FUSION-NM or 01-4FUSION-NM Fusion part numbers, you must first establish a connection between your microphones to the Fusion Base Station. This is called “pairing”. Refer to page x. Video Conferencing You must have the audio output going to a display with speakers coming from the Fusion Base Station, not the Video-conferencing Station. Plug Cable A (single RCA to double RCA) single RCA connector into Fusion Base Station RCA port and then plug the double RCA connectors into the speakers or display with speakers. Once you have configured your video-conferencing station as follows, then: If you ordered 01-8FUSION-62 6 omni tabletops/2 wearable microphones or 01-4FUSION-31 3 omni tabletops/1 wearable microphone. You are all set to go! Take out the Wireless Microphones, unmute them by pressing the mute button on the microphone and the system is ready for a conference! If you selected your microphones separately with the 01-8FUSION-NM or 01-4FUSION-NM Fusion part numbers, you must first establish a connection between your microphones to the Fusion Base Station. This is called “pairing”. Refer to page x. Page 5 Installation Guide Lifesize Installation Plug red RCA connector of Cable C, the double RCA to double RCA cable, into the Fusion Base Station , then plug the other end red RCA connector into the Lifesize video-station . Plug black RCA connector of Cable C, into the Fusion Base Station , and the other black RCA connector into the Lifesize video-station . Revolabs Fusion™ Specifications Dimensions, (L, W, H) and Weight: Fusion Base Station 16.45” (41.8 cm) x 8.46” (21.5 cm) x 1.7” (8.7 cm), 8.7 lbs (3.95 kg) Charger Base 8.3” (21.1 cm) x 4.3” (10.9 cm) x 1.0” (2.56 cm), 1.0 lb (0.45 kg) Wireless Microphones Wearable: 0.9” (2.3 cm) x 0.8” (2.0 cm) x 2.6” (6.6 cm), 0.05 lb (0.02 kg) TableTop: 1.5” (3.8 cm) x 0.8” (2.0 cm) x 3.3” (8.4 cm), 0.05 lb (0.02 kg) XLR Adapter: 0.9” (2.3 cm) x 0.8” (2.0 cm) x 4.0” (10.2 cm), 0.05 lb (0.02 kg) Radio Frequency: 01-8FUSION-XX 1.92 to 1.93 GHz (UPCS North America) 01-4FUSION-XX 1.92 to 1.93 GHz (UPCS North America) 01-8FUSIONEU-XX 1.88 to 1.90 GHz (DECT EU) 01-4FUSIONEU-XX 1.88 to 1.90 GHz (DECT EU) Connectors: Fusion Base Station IR Remote Serial DB9 CD Programming Serial DB9 - for Revolabs use only Audio Control RJ45 – for Revolabs use only Telephone Line-In RJ11 Telephone Set-In RJ11 Network RJ45 – for Revolabs use only XLR male Aux In RCA Plug Aux Out RCA Plug Record Out RCA Plug Room Out RCA Plug Conference In RCA Plug Conference Out RCA Plug Charger Base DC power input port, Proprietary 4 pin microphone charge jacks Microphone Proprietary 4 pin charge plugs, 2.5mm mono earplug port Power Requirements: Fusion Base Station 100-240V AC, 50-60 Hz, 10W (power cable varies by country) Charger Base 5V DC, 2 Amps (switching power supply varies by country) Range: 100’ (30 meters) approx. (no obstructions) Maximum Microphones: 01-8FUSION-XX, 01-8FUSIONEU-XX 8 channels maximum 01-4FUSION-XX, 01-4FUSIONEU-XX 4 channels maximum Battery: Lithium Polymer, 8 hours approx. talk time Charge Time: 2 hours approx. Audio Bandwidth 100-7000 Hz Security: 128-bit DSAA (DECT Standard Authentication Algorithm) authentication, 64 bit DECT Standard Cipher Page 33 Installation Guide Revolabs Fusion™ Warranty Revolabs, Inc. warrants this product to be free of manufacturing defects. Repair or replacement of any defective part or unit (at the discretion of the Seller) will be free of charge for the period of one year. Any attempt by the user to alter the equipment, or equipment damaged by negligence, accident, or Acts of God voids this warranty. The Seller shall not be liable for any consequential damage resulting from the malfunction of this product. Should the user experience unsatisfactory performance from this equipment, contact the Seller to obtain instructions for return, or replacement, as deemed necessary. This warranty is not transferable by the original end user. Revolabs, Inc. 63 Great Road Maynard, MA 01754 www.revolabs.com 800.326.1200 Page 32 Page 7 Revolabs Fusion™ Installation Guide Polycom Installation Plug red RCA connector of Cable C, the double RCA to double RCA cable, into the Fusion Base Station , then plug the other end red RCA connector into the Polycom video-station . Plug black RCA connector of Cable C, into the Fusion Base Station , and the other black RCA connector into the Polycom video-station . Station nel LEDs Meaning Charging in Progress Charging Complete Microphone powered OFF or battery discharged Flashing Microphone paired and muted N Flashing Microphone paired and “live” RED Pairing mode or confirmation of powering-down. ernating slow N and RED N Flashing Flashing Microphone or channel not paired Microphone low battery (mic live) Microphone low battery (mic muted) Searching for a connection, or out of radio range. The Microphone will try to re-establish the link for about 15 minutes, and then turn off automatically. Radio congestion – it is not possible to make a radio connection because there are already too many nearby users, or there is heavy radio interference. Possibilities include some types of digital cordless phones, and other Solo installations. Page 8 Unit is faulty. Contact your AV service provider for advice. Page 31 Installation Guide Revolabs Fusion™ Revolabs Solo™ Indicator LED Equipment Use Microphone LED Base S Chann Microphone in Charger Base Solid RED OFF Solid GREEN* OFF OFF OFF Two RED flashes every 1.5 seconds RED F GREEN flash every 1.5 seconds GREE Solid RED Solid R Alternating slow GREEN and RED OFF or Alte GREE Microphone not in Charger Base YELLOW flash alternat- GREE ing with GREEN YELLOW flash alternat- RED F ing with two RED flashes Alternating RED, YELOFF LOW, GREEN, YELLOW Rapid RED flashes con- OFF tinuing for more than a few seconds Page 30 Groups of five rapid RED flashes OFF Page 9 Installation Guide Revolabs Fusion™ SONY INSTALLATION Requires special cable of XLR connector to 3.5 mm phono connector. The Adapter does not provide phantom power or bias current so it cannot be used with condenser or electret microphones. With the microphone attached, un-mute the Adapter by pressing and releasing the Mute button (confirm by viewing flashing GREEN LED). If the microphone has an on-board mute switch, this switch must also be un-muted prior to use. To turn the Adapter off, return the microphone unit to the Charger Base or press and hold the Mute button for ~10 seconds until the LED turns solid RED and release button. Important: Always remove the microphone from the Adapter by pressing the latch switch and separating the parts before returning the Adapter to the Charger Base. If the Adapter is moved too far from the Base Station (~100 feet or 30 meters) the connection will be dropped (LED flashes all colors) and the audio will mute. After 15 seconds the microphone will beep 5 times, and will continue beeping every 30 seconds to indicate that it is out of range. Page 10 Move the XLR Adapter closer to the Base Station and the connection will automatically be re-established to its original state, and the beeping will cease. If not, the XLR Adapter will continue beeping until it turns off in about 15 minutes. Page 29 Installation Guide Revolabs Fusion™ Using the Solo XLR Microphone Wireless Adapter The Revolabs Solo™ Universal Wireless Adapter for Handheld Microphones, shown in the following figure, is connected to your existing handheld dynamic microphones for wireless freedom during open microphone meetings, Q&A sessions, classrooms, etc. 1. Mute button — press to mute, un-mute and pair microphone. 2. Rubber collar — durable and impact/strain protection. 3. XLR Female connector — balanced audio for dynamic microphones. 4. LED display — visual status for mute, un-mute, and pairing. 5. Audio Out port — accepts the 2.5mm plug for the earpiece 6. Power/Charging Port — docks to Charger Base To use the Revolabs Solo™ Universal Wireless Adapter: Remove the Microphone Adapter from the Charger Base. The adapter turns on and mutes automatically when removed from Charger Base (flashing RED LED). The XLR Microphone Adapter is attached to a standard dynamic microphone to convert it from a wired microphone to a wireless microphone (see following figure). Page 28 Page 11 Installation Guide Revolabs Fusion™ • Tandberg Installation • • Step 1 Step 2 Plug both RCA connectors on one end of Cable C into Tandberg videostation
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2008:04:17 16:00:37-04:00 Creator Tool : Acrobat PDFMaker 8.1 for Publisher Modify Date : 2008:04:17 16:03:27-04:00 Metadata Date : 2008:04:17 16:03:27-04:00 Producer : Acrobat Distiller 8.1.0 (Windows) Format : application/pdf Creator : susanzaney Title : Document ID : uuid:ba58aca0-c9d0-4cb6-a91d-7f3d8f4bbb87 Instance ID : uuid:84cf9c8e-3638-4a8b-a595-fbd9ae91cc9e Page Count : 19 Page Layout : OneColumn Author : susanzaneyEXIF Metadata provided by EXIF.tools