Revolabs 10FLXHNDVE FLX New Bluetooth Handset User Manual Insert

Revolabs Inc. FLX New Bluetooth Handset Insert

Contents

User Manual Insert

Compliance and Safety Information Please read the following information to ensure safe and efficient use of your Revolabs system. Caution: Risk of explosion if batteries are mishandled or replaced by an incorrect type. Do not disassemble batter-ies or attempt to charge outside the system. Do not dispose of batteries in fire. Dispose of batteries in accordance with manufacturer’s instructions and local regulations. Professional Installation Recommended: This product should be professionally installed. FCC Notice to Users: This device complies with Part 15 of the FCC Rules: Operation is subject to the following conditions: 1. This device many not cause harmful interference, and 2. This device must accept any interference received, Including interference that may cause undesired operation Changes and Modifications not expressly approved by Revolabs, Inc. can void your authority to operate this equip-ment under Federal Communications Commissions rules. Radio and Television Interference: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a resi-dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and the receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. You may also find helpful the following booklet, prepared by the FCC: "How to Identify and Resolve Radio-TV Inter-ference Problems." This booklet is available from the U.S. Government Printing Office, Washington D.C. 20402. Industry Canada Notice to Users: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ-ing interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The antenna(s) used for this equipment must be installed to provide a separation distance of at least eight inches (20 cm) from all persons. This equipment must not be operated in conjunction with any other antenna. This device complies with RF exposure requirements in Industry Canada RSS-102 Issue 4. Notice to Customers in Australia: -Do not use the areas where there are explosive hazards -Do not use in environments where there is a danger of ignition of flammable gasses. North America UPCS Usage Restriction for designated North American Models: Due to the UPCS frequencies used, this product is licensed for operation only in the United States of America and Canada. European Union Usage Restriction for designated European Models: Due to the DECT frequencies used, this product is licensed for operation only in the European Union countries and Australia. Notice to European Customers 190, High Street, Tonbridge, Kent, TN9 1BE, UK. Declare that for the hereinafter mentioned product model numbers, the presumption of conformity with the applica-ble essential requirements has been approved in accordance with Council Directive 1999/5/EC “Radio and Tele-communications Terminal Equipment” and RoHS II Directive 2011/65/EU. Any unauthorized modification of the products voids this Declaration. For a copy of the original signed declaration of conformity, please contact Revolabs at the above address. WEEE Notification: The Waste Electrical and Electronic Equipment (WEEE) directive (2012/19/EU) is intended to promote recycling of electrical and electronic equipment and their components at end of life. According to the requirement of the WEEE legislation the following user information is provided to customers for all branded Revolabs products subject to the WEEE directive. “The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.” Safety Warnings Follow the instructions in the Revolabs FLX Installation and Operation Guide Do not expose any of the FLX components to water, moisture, or high humidity. Do not expose any of the FLX components to extreme high or low temperatures. Do not expose any of the FLX components to lit candles, cigarettes, cigars, or to open flames, etc. Do not drop, throw, or try to bend any of the components, as rough treatment could damage them. Do not open the casings of any of the components of the FLX system Do not use any accessories other than Revolabs’ originals intended for use with this product. Use of non-original accessories may result in loss of performance, damage to the product, fire, electric shock or injury. The warranty does not cover product failures which have been caused by use of non-original accessories. Only use the power adapters provided to connect the components to the electric mains. Do not open or try to modify any of the batteries delivered with the FLX components. Replace batteries only with Revolabs approved batteries.

Navigation menu