Revolabs Car Speaker Hdx 7000 Users Manual

Solo Single Channel - Setup Guide - Polycom HDX7000 Solo Single Channel - Setup Guide - Polycom HDX7000

HDX 7000 to the manual 72594cae-857a-4124-975b-7bce20a3cda6

: Revolabs Revolabs-Car-Speaker-Hdx-7000-Users-Manual-523876 revolabs-car-speaker-hdx-7000-users-manual-523876 revolabs pdf

Open the PDF directly: View PDF .
Page Count: 3

Download
Open PDF In Browser	View PDF

Revolabs Single Channel System - Polycom HDX 7000 Setup Guide
NOTES A ND CA UTIONS:

This setup guide will guide you through the steps needed to properly connect a
Revolabs Single Channel System to a Polycom HDX 7000 video codec.
1. Connecting the Cables
2. Configuring the HDX 7000 Video Codec
Note: It is important to carefully follow these instructions in order and completely .

Otherwise your Single Channel System and/or the video codec may not function
properly. Please read through these instructions completely before proceeding.
Contact Revolabs technical support if you have any questions.
Requirements for connecting systems:
1. Revolabs Single Channel System
2. Revolabs 2.5mm to RCA Audio Cable (included with Single Channel)
3. Polycom HDX 7000 video codec

Connecting the Cables
CONNECTING A REVOLA BS SINGLE CHA NNEL SYSTEM TO POLYCOM HDX 7000 VIDEO CODEC

1. Connect a Revolabs 2.5mm to RCA audio cable between the 2.5mm analog
output on the Single Channel System and the red “Audio Input AUX” port on the
HDX 7000.

Configuring the HDX 7000 Video Codec
CONFIGURI NG THE A UDIO MENUS OF THE HDX 7000 VIDEO CODEC

1.
2.
3.
4.
5.
6.
7.
8.

9.

Select SYSTEM
Select ADMIN SETTINGS and enter the Administrator password (if needed)
Select AUDIO
Select AUDIO SETTINGS
Disable POLYCOM MICROPHONES by removing the check mark. Having
Revolabs and Polycom microphones will increase ambient noise, add to echo
cancellation problems, and reduce articulation*
Verify LIVE MUSIC MODE is disabled by removing the check mark. Polycom
noise suppression is turned off when this is active
Select INPUTS/OUTPUTS
Confirm or modify the following settings:
a. INPUT TYPE is LINE INPUT
b. INPUT TYPE LEVEL is 80% or 8
c. ECHO CANCELLER is ON
Press OK to save all changes
NOTE: IF THE GOAL IS TO USE THE REVOLABS WEARABLE MICROPHONE OR XLR
PLUG-IN ADAPTER WITH THE HDX SYSTEM , THEN DISABLING OF THE POLYCOM
MICROPHONES IS NOT NECESSARY DUE TO THE MINUTE AMOUNT OF ECHO
CANCELLATION PROCESSING POWER NEEDED FOR THESE MICROPHONES .
DOES NOT RECOMMEND ADDING A

REVOLABS

REVOLABS BOUNDARY MICROPHONE TO AN

EXISTING HDX MICROPHONE SYSTEM BECAUSE OF ECHO CANCELLATION REFERENCES
AND VOLUME LEVEL DIFFERENCES .



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 3
Language                        : en-US
Tagged PDF                      : Yes
Author                          : dgoguen
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2009:01:29 20:50:27
Modify Date                     : 2009:01:29 20:50:27
Producer                        : Microsoft® Office Word 2007

EXIF Metadata provided by EXIF.tools