Rexon Technology BT-24D Bluetooth Dongle User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1794291
Application ID	yj+te1gODACjZUao+fcu2Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	105.59kB (1319907 bits)
Date Submitted	2012-09-18 00:00:00
Date Available	2012-09-18 00:00:00
Creation Date	2012-09-17 12:38:43
Producing Software	Adobe PDF Library 9.9
Document Lastmod	2012-09-17 10:50:02
Document Title	User Manual
Document Creator	Adobe InDesign CS5 (7.0)

User
manual
Wireless Speaker Microphone
This product is designed to radiate low
levels of radio energy in accordance with
global government approved regulatory standards. It features Adaptive Power
Output. APO automatically adjusts the RF
power output in accordance with signal
required. This features limits and reduces
extraneous radiated radio energy. This also
helps minimize battery consumption and
extends battery shift life. Do not touch the
antenna when operational. Keep it 1.5 cm
(5/8 inch) or more away from your body to
ensure exposure levels remain at or below
the maximum levels.
Table of Contents
Parts & Functions��������������������������������������������������� 4
Carry Clip Removal���������������������������������������������� 5
Operation Description������������������������������������������ 6
Basic Operation���������������������������������������������������� 8
••
••
••
••
••
••
••
Power On & Off����������������������������������������������� 8
Volume Control������������������������������������������������ 8
Transmitting/Receiving������������������������������������ 8
Emergency (optional)������������������������������������� 8
Multiple unit operation������������������������������������ 9
Motorcycle operation������������������������������������� 9
Headset - Covert operation��������������������������� 9
Technical Notes�������������������������������������������������� 10
••
••
••
••
••
••
••
••
••
••
Battery Charging������������������������������������������� 10
Replacing the battery pack������������������������ 11
Re-connection����������������������������������������������� 12
Microphone adjustment������������������������������� 12
Antenna choice & replacement����������������� 13
Installation & Connections��������������������������� 14
Alternate configurations������������������������������� 16
Approvals, Warranty & Warnings����������������� 18
Important safety and handling�������������������� 20
Specifications������������������������������������������������� 23
Parts and functions
Charging contacts
Antenna
Volume up
SMA
Volume down
Connector
Status light
Manual
Off/On
Status light
Microphone
PTT: Press-To-Talk
Loudspeaker
Emergency
(optional)
Manual Off/On
DC charging
Headset connector
Earpiece jack
(Optional)
Volume up: adjusts speaker audio louder.
Volume down: adjust speaker audio softer - minimum setting.
Microphone: talk in a normal strength voice about 3 to 5cm (2”).
PTT: press to talk - beeps if pressed when out of range
Emergency: triggers host radio’s emergency function. Hold down
as per mobile radio’s emergency button operating instructions The unit will beep if pressed when out of range.
Manual off/on: hold for about 3 seconds to turn on or off. The spk
mic will sound escalating or de-escalating tone to advise status.
*Normal configuration see Installation section for alternatives. **Buy separately as needed.
DC charging: place into charger to automatically re-charge.
Headset connector: use with associated** headsets/accessories.
Earpiece jack: allows private listening via 3.5mm mono earpieces.** The loudspeaker is disabled when 3.5mm plug is inserted.
Loudspeaker: Delivers loudspeaker audio - Automatically turns
off when inserted into mobile/base charger.*
Status light: glows blue when connected and operational. It will
flash when “out of range” or when the mobile charger unit is off.
SMA Connector : Vital for maximum range. Unscrews at connector
to allow replacement if damaged. Use only original replacement
from your Wireless Speaker Microphone supplier.
Carry Clip Removal
Standard spring belt clip
This is the traditional type most users are familiar with. It allows the
Spk Mic to be clipped to work vests, clothing, epaulettes, etc.
For maximum performance 360º around your vehicle it is recommended that it be worn in a location that allows the antenna
to protrude above you body. The antenna should always be located os that
To remove follow these three photos: Locate the metal securing
tag - Press the tag away from the Spk Mic whilst sliding the clip
upwards.
Identify
release
tag
Push out
w h i l e
sliding
clip up
Operation Description
Congratulations on choosing the revolutionary Wireless
Speaker Microphone. This incredibly compact, lightweight personal accessory extends the power of the
mobile radio to the palm of your hand, whether in and
out of the vehicle. It stands ready to re-define mobile
network design by increasing user functionality and
mobility whilst dramatically improving the effectiveness
of your infrastructure investment. This visionary solution
provides users out of vehicle communications with the
power and performance of their mobile radio.
It cuts the cord and for the first time puts the microphone and radio system access into the palm of the
users hand when away from the vehicle, delivering true
mobility without system compromise. Users can feel totally confident their private communications are kept
securedue to the smart 64 bit/128 bit encryption (model
dependent) functionality.
The Wireless Speaker Microphone uniquely incorporates
“hard wire coding” connection protocol that eliminates
any possibility of outside intrusion between the unit and
your vehicle’s mobile.
It unleashes the power of your mobile radio allowing
wireless communication with a fixed mounted or vehicle radio: 60, 150, 300 metres or more*. Now users can
communicate with enhanced clear audio, with the
power and range of their mobile radio, while not being
tied to the vehicle allowing the user to be truly mobile in
every operational environment.
Finally, if you go out of range, the blue LED will flash and
the unit will sound a warning tone if you press the PTT or
optional Emergency button, so you will know to move
back into your communication zone or, to be simply
aware. This ability to now communicate whilst outside
your vehicle is a great assistance to enhancing a safer
and more secure work environment for everyone who
carries a Wireless Speaker Microphone.
How it works
Existing radio system
Mobile base/charger connects
to your mobile radio in your
vehicle (or office) - It passes all
voice traffic and alert tones to
and from your Wireless Speaker
Microphone
Communication zone
60m.... 150m.... 300m...
*Range is always dependent on the local terrain and
communications environment. A variety of antenna
configurations are available to enhance in-building
penetration or, simply to extend the overall communication zone around your vehicle. Ask your dealer which
antenna best suits your specific application.
Basic Operation
Power On & Off
Usually the unit will be installed such that it powers off & on in synchronization with the host mobile radio or by a manual switch fitted by your installation mechanic. You can manually turn off the
mobile charger by pressing the front orange button for 3 seconds
and the blue LED will extinguish. You can do the same on the
Wireless Speaker Microphone by pressing the lower grey button.
The speaker mic will sound a de-escalating tone. To power On,
do the same, releasing the button once the LED lights. The speaker mic will sound an escalating tone. The blue LED on both units
will flash momentarily and then go solid once they’re connected.
Volume Control
When you first activate the unit you should first ensure your mobile
radio’s volume is set to a comfortable listening level. You may
then adjust the Wireless Speaker Microphone volume by pressing
the right top button to increase or the left to decrease. There are
5 listening levels. The minimum level is not zero but is designed so
you can still quietly hear radio traffic.
Transmitting/Receiving
Use like any two way radio i.e. press the large grey PTT button to
talk and release to listen. Speak with a normal voice about 3-5cm
(2”) from the microphone port. Note: if you walk out of range the
blue status LED will flash. If you then push the PTT an alert tone will
sound to let you know your call is not getting though. Depending
on your location, you may find you need to walk back about 10
meters (yards) to re-connect. Blue status light will glow solid. The
unit features a 3.5mm earpiece jack allowing use of a huge variety of personalized earpieces. Plugging in an earpiece disables
the internal loudspeaker for added privacy.
Emergency
If enabled, the emergency button can be used to trigger and
reset the emergency function in your suitably equipped mobile
radio. The time you hold the button is the time your mobile radio
sees the emergency command. So if your mobile radio requires
you to hold the radios front panel emergency button for 2 seconds, then you should hold the Wireless Speaker Microphone
emergency button for 2 seconds.
Multiple Unit Operation
Up to three Wireless Speaker Microphones may be connected to
one radio device by use of the optional Interface box accessory.
Operation is identical to single user operation with the added
benefit that, each party also hears each other talk when they
transmit. This functionality is ideal for police: where two officers
are assigned to a patrol van, or ambulance: where up to 3 paramedics can communicate at a scene as well as with their control
room. It is also ideal for office use allowing up to 3 personnel to
access a local base or control station or remote control console
while moving around a building, shop or warehouse.
Note: communication between users is always routed back
through their respective chargers and not direct between units.
Ask your dealer for more information on this unique and valuable capability.
Motorcycle Operation
The Wireless Speaker Microphone is especially suitable for motorcycle use. Models fitted with a 6 pin Hirose industrial connector
allow easy connection to a helmet microphone and dual earpiece fit out. Making use of the handlebar PTT input, a bike can
be configured so that, when the rider is on the bike and presses
the handle bar PTT, their headset microphone audio is sent out
over the radio. Off the bike but still wearing the helmet, they can
press the Wireless Speaker Microphone PTT to talk, or finally, if they
remove their helmet, they can unplug the Hirose connector and
use the speaker microphone like standard.
Headset or Covert Operation
The 6 pin Hirose industrial connector also allows use of a variety
of heavy duty and lightweight headsets and application specific
audio accessories to enhance you communications capability. Use either the headset/accessory’s integral PTT or use the
speaker mic PTT to transmit. The internal speaker is immediately
disabled when a headset is plugged in.
The small size of the unit may allow for its selective use in covert
applications. The remote monitor PTT function means someone
else can enable “listening” without the covert operative having
to touch anything. As audio is duplex (bidirectional) you can also
talk to them at the same time. A 128 bit version is also available
to ensure high levels of voice security.
Technical Notes
Battery - Charging
The Wireless Speaker Microphone should
be charged overnight before initial use.
Thereafter it may be left in the charger
unit between calls, or may be worn all
day and placed back at the end of the
work day. The unit is designed to provide
about 10-12 hours operation between
charges. If the unit does start to go flat a
short beep will sound about once every
2 minutes. You should then re-charge the
unit as soon as practicable, A fully discharged battery will typically recharge
in less than 5 hours or less if only partially
discharged. The battery will re-charge
even if the mobile charger unit has been
turned off. The microphone’s blue status
light will indicate charging mode.
Simply place into pocket.
NB: do not allow debris to fill the pocket
and prevent the microphone from
making contact with the charging pins.
Li-POL
Please recycle thoughtfully
10
Replacing the battery pack
Like all re-chargeable products, periodic replacement
of the internal battery is required. The Wireless Speaker
Microphone features a 1200mA Lithium Polymer battery
to provide typically 10-12 hours operation when used
with a busy radio channel.
To maximize the life of a Lithium battery its is better to
keep it topped up by returning it to the charger often
rather than waiting for it to first go flat - which was the
case with older nickel based batteries. Typically you
can expect to get about 400-500 full re-charge cycles
before the battery will require replacement.
When you notice the sounding a small chirp, it indicates the battery is nearly flat and should be recharged. When you notice this occurring far more often
than usual, it may mean it is time for the battery to be
replaced. the process is simple and should only take
your radio service supplier about 5 minutes to replace
and test. Replacement of the battery should be ONLY
undertaken by a qualified service technician so as to
ensure no damage occurs to internal circuitry and to
ensure the housing’s weatherproof integrity is not compromised.
The replacement battery part number is:
XSMB-C12: 1200mA Lithium Polymer battery pack
After replacement, the Wireless Speaker Microphone
must be first placed back into the mobile charger and
will initially need to be charged for 12 hours prior to
commencement of use. Depending on the situation
it may also need to be “re-connected” to the mobile
charging unit)
11
Re-connection
Each Wireless Speaker Microphone is uniquely connected to a specific mobile charger. This ensures that
all communications between the two units are secure
and cannot be compromised or interfered with by a
third party. In the event of a Wireless Speaker Microphone being lost, it can be permanently disconnected
from the mobile charger by connecting with a new replacement unit.
How to re-connect: hold the speaker mic while pressing
both the blue up and down volume controls until the
blue LED flashes and the speaker mic beeps.(About 8 secs.)
Now place the speaker mic back
into the mobile charger. After a few
seconds the speaker mic will sound
a confirmation two tone and the
blue LED on both units will glow solid
to indicate connection is complete.
Press together
until LED flashes
and unit beeps
Microphone adjustment
Qualified service personnel only!
The Wireless Speaker Microphone
system is usually factory set for standard audio levels required to provide
satisfactory mobile radio transmit
voice levels. Should the volume be
too soft or loud and distorted, it may
require re-adjustment to set the correct level for your installation.
Using a radio systems analyser to monitor the radio
channel adjust the internal trim pot so as to achieve
maximum permitted voice deviation within minimum
voice clipping (distortion). See photo for access point
12
Antenna choice & replacement
The XRMA multipolarity antenna provides enhanced
coverage when mounted on an unobstructed area of
a vehicle’s roof and should be connected via the supplied low loss coax cable to the output of the mobile
charger. Alternatively use of an approved bidirectional
amplifier (BDA) may also be installed to further enhance
in-building coverage from your vehicle. The XBDA is installed in series by using a 3 metre (10’) length of RG58A
connected to the output of the mobile charger. The
XRMA antenna then connects to the output of the
XBDA. Only qualified radio service personnel should install a BDA so as to ensure the effective radiation level
remain in full compliance with regulatory requirements
in your country of operation.
In the event of a damaged or lost antenna, only original
replacements should be used so at to not compromise
the units type approval certification.
The antenna on the speaker microphone is a unity gain
ground independent antenna to ensure the maximum
multi-directional range. The mobile charger output provides a reverse polarity sma female antenna connector as does the XBDA.
The following accessories are available from your Wireless
Speaker Microphone supplier:
XSMA - replacement speaker mic antenna
XRMA - Unity gain, bracket mount, multi-polarity antenna with 5 metre (17’) low loss LMR200 coax and
unfitted RP SMA male connector.
XBDA - 12dB gain bidirectional amplifier with 3 metre
(10’) RG58A coax tail and 1 metre (39”) DC power
cable.
13
14
Installation & Connections
1. Switched B+: Used to automatically turn on/off Wireless Speaker Microphone if connected to host radio
switched B+ output, if not, the user should supply manual on/off switch. Note: internal speaker microphone
battery will still charge when the unit is turned off.
2. External Mic Audio: Audio from the Wireless Microphone that is to be transmitted over the host mobile
radios transmitter. It is factory set for 80mV RMS.
3. Radio Mic Lo: This is microphone audio ground.
4. Receive Audio: Receive audio from the host mobile
radio that you wish to be sent to the Wireless Microphone. Ideally it should be sourced pre-volume control but can be post as long as the host mobile radio’s
speaker audio has been sent for comfortable listening
in the vehicle.
5. Power: connected via a 1 amp in-line fuse preferably
direct to a vehicle’s 12V battery but can be any voltage from about 6-15VDC. The current consumption is
typically 60mA with peak current of 420mA.
6. Ext. PTT: Switched ground output designed to cause
the host mobile radio to transmit.
7. Emergency: Output intended to connect to the host
mobile radio’s emergency input. It is normally provides
an active switched ground but can be jumpered to be
active open circuit/high. The time held low (or high) is
the exact time that the user presses their Emergency
button. This output could be used for other functions
such as to trigger the panic function of a car alarm
system, providing it is correctly “buffered” so as to not
cause damage to the mobile charger.
8. COR/squelch/audio unmute: Input designed to monitor the receive status of the host mobile radio. Ideally,
it is driven by an “audio unmute” command in the host
mobile. i.e. when the radio’s speaker unmutes to pass
audio then the COR input should toggle in sync.
15
Alternatively, it could be driven by the radio’s unsquelch
command that factors in reception of required correct
CTCSS tones, etc. Internal jumpering caters for active
low or high inputs.
9. Ground: DC ground connection.
13. Remote PTT: This provides a remote alternative to
transmit Wireless Speaker Microphone audio via the
host mobile radio. You may choose to connect to a
motorbike handle bar PTT, a hidden palm or footswitch,
a wireless PTT device, or even to an output from the host
mobile equipped to provide remote radio monitoring of
the Wireless Speaker Microphones users audio. In such
remote monitoring cases, use of the remote PTT input
causes the sensitivity of the Wireless Speaker Microphone to be greatly increased, so a control room operator can more easily monitor the health or safety of the
user. There is no increased audio gain when a headset
is connected to the base of the Wireless Microphone.
15. Ground: Additional DC ground connection.
Alternate Configurations
Some alternate configurations are available by internal jumpering of the mobile charger unit. These
are provided to typically allow compatibility with
different mobile radio types.
Re-configuration of these jumpers should only be
undertaken by qualified radio service personnel.
To access, first remove the rear mounting plate. Next
remove the 4 screws to access internal PCB. Take extreme care when handling the PCB to prevent damage
by electrostatic discharge (ESD) or to internal wiring.
Re-assemble carefully remembering to re-insert the belt
clip securing spring.
16
Mobile Charger PCB layout
Install Jumper configuration:
SJ1 Default Out
SJ2 Default In
SJ3 Default In
SJ4 		
SJ5 Default In
SJ6 Default In
SJ7 Default Out
SJ8 Default In
-Fit for for N/C emergency trigger
-Remove for N/C emergency trigger
-Remove for active Hi radio COR
-Future use
-Remove for special applications
-Remove for Vox disable
-Fit for adjustable Rx audio in
-Remove for adjustable Rx audio in
R40 Default not fitted
R41 Default fitted
* or as appropriate
-Fit 0 ohm* for DC shift COR detect
-Remove for DC shift COR detect
J3 default In		
-Remove to prevent the wireless mic
turning off when placed inside the mobile charger. This option is
generally recommended only when the host radio has no internal or external speaker. Removing J3, may cause the re-charge
time to increase significantly on a very busy radio channel.
17
Type Acceptance
RADIO AND TELEVISION INTERFERENCE
The equipment described in this manual generates, uses, and radiates radiofrequency energy. If it is not installed and used correctly—it may cause interference with radio and television reception.
CE DECLARATION
This equipment has been tested and found to comply with the following harmonised European Norms:
•EN300328 (radio and telecommunications terminal equipment)
•EN55024 (electromagnetic immunity) •EN55022 Class B (electromagnetic
emissions) •EN 60950 (electrical safety) •EN301489 (electromagnetic compatibility and radio spectrum matters) Based on the results of these tests, Wireless
Corporation declares that the above mentioned devices conform to Article
10.1 of the European Council Directive 89/336/EEC, and their amendment
Directive 93/68/EEC, and to the Directive 1999/5/EC and indicates this conformity by the CE-sign on each device. The device must be installed and operated in strict accordance with the instructions given in this user manual. Any
changes or modifications to this product that were not specifically authorised
will invalidate this declaration.
FCC NOTICE
This equipment complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
You can determine whether the equipment is causing interference by disconnecting power. If the interference stops, it was probably caused by the
equipment. If the equipment does cause interference to radio or television
reception, you may be able to correct the interference by using one or more
of the following measures:
•Rotate the television or radio’s antenna until the interference stops.
•Move the Wireless Microphone further away from the television or radio.
If necessary, consult your two way radio dealer or an experienced radio/
television technician for help. Changes or modifications to this product not
authorized by the manufacturer could void the FCC Certification and negate
your authority to operate the product.
Notice : Changes or modifications not expressly approved by the party for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements
and void user’s authority to operate the device.
18
Warranty
The manufacturer warrants each new product sold to be free from defects
in material and workmanship under normal use and service. The obligation
and liability under this warranty is limited to the repair or replacement at its
factory, at the option of the manufacturer, of any such product which proves
defective within the quoted warranty period, twelve (12) months for the products after delivery, and is found to be defective in material and workmanship
by inspection. Products of warranty consideration shall be returned with all
transportation charges prepaid to the manufacturer, or our nominated local
service supplier in shipping containers which are adequate to prevent loss
or damage in shipment. The manufacturer, will pay the return carriage costs
for the products. Products repaired or replaced under this warranty are warranted for the unexpired portion of the original warranty. This warranty is invalid
if the factory-applied serial number, date code label, or product label has
been altered or removed from this product. The manufacturer shall not be
obligated or liable under the warranty for apparent defects which examination discloses are due to tampering, misuse, neglect, improper storage, acts
of nature, physical abuse, normal wear and all cases where the products are
disassembled by other than authorised service representatives. In addition,
the manufacturer shall not be obligated or liable under this warranty unless
the date of delivery to the first end user shall be within one (1) month from the
date of delivery to the original purchaser, if different from the first end user, and
further provided that written notice of any defect shall be given to the manufacturer within thirty (30) days from the date such defect is first discovered. In
no event will the manufacturer accept consequential damages for products
supplied and are then found to have become defective.
Headset use warning
Headsets and earpieces used with this product are capable of delivering
sounds at loud volumes. Exposure to such sounds can result in permanent
hearing loss damage. The volume level may vary based on conditions such
as host radios volume settings and the environment. Please read the following
safety guidelines below prior to using a headset or earpiece:
1. Prior to using this product follow these steps:
•Before putting on the headset, turn the volume control to its lowest level,
•Put the headset on, and then slowly adjust the volume control to a comfortable level.
2. During the use of this product:
•Keep the volume at the lowest level possible and avoid using the headset
in noisy environments where you may be inclined to turn up the volume;
•If increased volume is necessary, adjust the volume control slowly.
•If you experience discomfort or ringing in your ears, immediately discontinue using the headset and consult a physician.
With continued use at high volume, your ears may become accustomed
to the sound level, which may result in permanent damage to your hearing
without any noticeable discomfort. Using a headset while operating a motor
vehicle, motorcycle, watercraft may be dangerous, and is illegal in some jurisdictions. Check your local regulations and laws.
19
Important Safety and Handling Information
To avoid injury, read all operating instructions and the following safety information before using the Wireless Speaker Microphone.
WARNING: Failure to follow these safety instructions could result in
fire, electric shock, or other injury or damage to the unit or other
property. Read all safety instructions for any products and accessories before using with the unit. The Manufacturer is not responsible
for the operation of, or any damage caused by, third-party accessories or their compliance with safety and regulatory standards.
Exposure to Radio Frequency Energy:
The unit transmits and receives radio frequency (RF) energy through its antennas. The antennas are located at the top edge of the unit. The Wireless
Speaker Microphone is designed and manufactured to comply with the limits
for exposure to RF energy set by international regulatory agencies, including
the FCC of the United States, IC of Canada, MIC of Japan, and the Counsel of
the European Union, among others. The unit has been tested and meets the
FCC, IC, and European Union RF exposure guidelines for 802.15 operation. To
ensure exposure levels remain at or below the maximum safe levels, when carrying the unit ONLY use the Wireless Speaker Microphone with the manufacturer’s supplied clothing clip or a non-metalic holder that ensures the antenna
remains greater than 10mm (2/5 inch) from your body at all times. An external
antenna is connected to the output connector on the mobile charger or to
the output connector on the XBDA bidirectional amplifier. Always keep your
body at least 20cm (8”) from the antenna whip. The XBDA is only approved
for use with this mobile charger unit in accordance with FCC regulations. refer
FCC ID: I7OBT-24D.
Potentially Explosive Atmospheres:
Turn off the unit when in any area with a potentially explosive atmosphere.
Do not charge, and obey all signs and instructions. Sparks in such areas could
cause an explosion or fire, resulting in serious injury or even death.
Areas with a potentially explosive atmosphere are often, but not always,
marked clearly. Potential areas may include: fueling areas (such as gas stations); below deck on boats; fuel or chemical transfer or storage facilities;
vehicles using liquefied petroleum gas (such as propane or butane); areas
where the air contains chemicals or particles (such as grain, dust, or metal
powders); and any other area where you would normally be advised to turn
off your vehicle engine.
Radio Frequency Interference:
Radio frequency emissions from electronic equipment can negatively affect
the operation of other electronic equipment, causing them to malfunction.
Although the Wireless Speaker Microphone is designed, tested, and manufactured to comply with regulations governing radio frequency emission in countries such as the United States, Canada, the European Union, and Japan, the
wireless transmitters and electrical circuits in the unit may cause interference in
other electronic equipment. Therefore, please take the following precautions:
20
i/Aircraft: Use of the Wireless Speaker Microphone may be prohibited while
traveling in aircraft.
ii/Vehicles: Radio frequency emissions from the unit may affect electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle.
iii/Pacemakers: The Health Industry Manufacturers Association recommends
that a minimum separation of 15 cm (6 inches) be maintained between a
handheld wireless phone and a pacemaker to avoid potential interference
with the pacemaker. Persons with pacemakers:
a/ Should always keep the Wireless Speaker Microphone more than 15 cm
(6 inches) from the pacemaker when turned on
b/ Should not carry it in a breast pocket
c/ Should use the ear opposite the pacemaker to minimize the potential
for interference If you have any reason to suspect that interference is taking place, turn it off immediately.
iv/ Hearing Aids: The Wireless Speaker Microphone may interfere with some
hearing aids. If you experience interference, consult the hearing aid manufacturer or your physician for alternatives or remedies.
v/ Other Medical Devices: If you use any other personal medical device, consult the device manufacturer or your physician to determine if it is adequately
shielded from radio frequency emissions from the unit.
vi/Health Care Facilities Hospitals and health care facilities may use equipment that is particularly sensitive to external radio frequency emissions. Turn
the unit off when staff or posted signs instruct you to do so.
vii/Blasting Areas and Posted Facilities To avoid interfering with blasting operations, turn off the Wireless Speaker Microphone when in a “blasting area” or in
areas posted “Turn off two-way radio.” Obey all signs and instructions.
Repairing or Modifications:
Never attempt to repair or modifythe Wireless Speaker Microphone yourself.
The unit does not contain any user-serviceable parts, except (where applicable). Disassembling, including the removal of external screws and back cover,
may cause damage that is not covered under the warranty. If the unit has
been submerged in water, punctured, or subjected to a severe fall, do not
use it until you take it to an Authorized Service Provider. Service should only be
provided by the Manufacturer or an Authorized Service Provider. If you have
questions or for service information, contact the Manufacturer or an Authorized Service Provider.
Battery Replacement:
Do not attempt to replace the rechargeable battery in the unit yourself. The
battery should be replaced only by the Manufacturer or the Authorized Service Provider.
Charging:
To charge the unit, use only the mobile or desktop charger. When using the
desktop charger, make sure the plug pack is connected before you plug it
into a power outlet. Do not connect or disconnect the AC/DC plug pack with
wet hands.
21
The AC/DC plug pack may become warm during normal use. Always allow
adequate ventilation around the AC/DC plug pack and use care when handling. Unplug the AC/DC plug pack if any of the following conditions exist:
1/ The power cord or plug has become frayed or damaged.
2/ The adapter is exposed to rain, liquid, or excessive moisture.
3/ The adapter case has become damaged.
4/ You suspect the adapter needs service or repair.
5/ You want to clean the adapter.
Road Safely:
Use while driving a vehicle or riding a motorbike may be distracting. If you
find using the Wireless Speaker Microphone disruptive or distracting while driving or riding, pull off the road and park before making or answering a call.
Use of the Wireless Speaker Microphone alone or with headphones (even if
used only in one ear) while driving or riding is not recommended and is illegal
in some countries. Consider using a compatible hands-free device. Use of a
hands-free device may be required in some areas. Check and obey the laws
and regulations regarding the use of mobile devices like the Wireless Speaker
Microphone in the areas where you drive or ride.
Vehicles Equipped with Air Bags:
An air bag inflates with great force. Do not store the Wireless Speaker Microphone or any of its accessories in the area over the air bag or in the air bag
deployment area.
Carrying and handling:
The unit contains sensitive components. Do not drop, disassemble, microwave, burn, paint, or insert foreign objects. Do not use the unit if it has been
damaged—for example, if it is cracked, punctured, or damaged by water.
Keeping Clean:
Clean the Wireless Speaker Microphone and mobile charger immediately
should they come into contact with any contaminants that may cause malfunction—e.g, ink, oils, dirt, food and drinks. To clean, turn off (press and hold
the On/Off button) and remove all cables. Then use a slightly damp soft cloth.
Don’t use solvents, turpentine window cleaners, or abrasive household cleaners to clean the unit.
Connectors and Press buttons:
Never force a connector into a port or apply excessive pressure to a button,
because this may cause damage that is not covered under the warranty. If
the connector and port don’t join with reasonable ease, they probably don’t
match. Check for obstructions and make sure that the connector matches
the port and that you have positioned the connector correctly in relation to
the port.
22
Accessories Performance:
Not all Hirose 6 pin accessories are fully compatible withthe unit.
Under some conditions, certain accessories may affect the wireless performance. Reorienting or relocating the Wireless Speaker Microphone and the
connected accessory may improve wireless performance.
Acceptable Temperatures:
The unit is designed to be operated in temperatures normally between -10º
and 45ºC (14º to 113ºF) and stored in temperatures between -20º and 50ºC (-4º
to 122ºF). Lower or higher temperature conditions might temporarily shorten
battery life or cause the unit to temporarily stop working properly. Leaving
the Wireless Speaker Microphone in a parked vehicle in direct sunlight might
cause it to exceed these storage or operating temperature ranges. Avoid dramatic changes in temperature or humidity when using it as condensation may
form on or within the unit. When you’re using the Wireless Speaker Microphone
or charging the battery, it is normal for it to get warm.
Specifications
The equipment has been designed to meet the following global
specifications:
Dimensions:		
88x28x63mm (spk mic) 80x80x60 (chgr)
		3.46x1.1x2.48” (spk mic) 3.15x3.15x2.36”(chgr)
Weight:		
149 grams (spk mic) 125 grams (chgr)
Frequency:		
2.40-2.48GHz FH Spread Spectrum
Protocol: 		
802.15 based
RF Power:		
<100mW
RF Connectors:
RP SMA Female
Rated audio/distortion: >250mW @ 6% THD
Operating Voltage:
3.7VDC
Operating Temperature: -10ºC to+45ºC (extreme -20ºC to +50ºC)
		14ºF to+113ºF (extreme -4ºC to +122ºF)
Shock & Vibration:
Mil Std 810 C/D/E/F
Humidity/Rain/Dust:
IEC529, IP55 (spk mic only)
Type acceptance:
CE, FCC,
FCC ID: I7OBT-24H / I7OBT-24D
0681
Subject to change or improvement without notice
23
All rights reserved ©2012
All logos are trademarks or registered trademarks of their respective
owners.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : Adobe InDesign CS5 (7.0)
Modify Date                     : 2012:09:17 10:50:02+08:00
Create Date                     : 2012:09:17 12:38:43+10:00
Page Count                      : 24
XMP Toolkit                     : Adobe XMP Core 5.0-c060 61.134777, 2010/02/12-17:32:00
Metadata Date                   : 2012:09:17 12:38:48+10:00
Creator Tool                    : Adobe InDesign CS5 (7.0)
Page Image Page Number          : 1, 2
Page Image Format               : JPEG, JPEG
Page Image Width                : 256, 256
Page Image Height               : 256, 256
Page Image                      : (Binary data 6877 bytes, use -b option to extract), (Binary data 6067 bytes, use -b option to extract)
Instance ID                     : uuid:af68ecac-1e46-394a-bcd3-9740387fce10
Document ID                     : xmp.did:2E2D057DDE2168118083FDA46EA5C06A
Original Document ID            : xmp.did:F77F11740720681188C68C3169F9D5CA
Rendition Class                 : proof:pdf
History Action                  : created, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved
History Instance ID             : xmp.iid:F77F11740720681188C68C3169F9D5CA, xmp.iid:FB7F11740720681188C68C3169F9D5CA, xmp.iid:FC7F11740720681188C68C3169F9D5CA, xmp.iid:CF0FCD412920681188C68C3169F9D5CA, xmp.iid:8823509C3020681188C68C3169F9D5CA, xmp.iid:5EEE2D893820681188C68C3169F9D5CA, xmp.iid:EC4264F93B20681188C68C3169F9D5CA, xmp.iid:5498D0585820681188C68C3169F9D5CA, xmp.iid:0E1B1F74072068118C1483A6D0FD88DA, xmp.iid:B2D6E746092068118C1483A6D0FD88DA, xmp.iid:CCE6220E0C2068118C1483A6D0FD88DA, xmp.iid:CDE6220E0C2068118C1483A6D0FD88DA, xmp.iid:412672691F2068118C1483A6D0FD88DA, xmp.iid:79F1C879532068118C1483A6D0FD88DA, xmp.iid:7E861A68F92068118C1483A6D0FD88DA, xmp.iid:DA0C7C20062168118C1483A6D0FD88DA, xmp.iid:45C638080E2168118C1483A6D0FD88DA, xmp.iid:69A49CFA0E2168118C1483A6D0FD88DA, xmp.iid:9AE0EFD0112168118C1483A6D0FD88DA, xmp.iid:6F7B20D3142168118C1483A6D0FD88DA, xmp.iid:DECE6A3C172168118C1483A6D0FD88DA, xmp.iid:A73BF391172168118C1483A6D0FD88DA, xmp.iid:02062DCF202168118C1483A6D0FD88DA, xmp.iid:EF6472442E2168118C1483A6D0FD88DA, xmp.iid:22BB3274072068119109F47FD78BEF7C, xmp.iid:6D8599C70A2068119109F47FD78BEF7C, xmp.iid:6E8599C70A2068119109F47FD78BEF7C, xmp.iid:382F2D290E2068119109F47FD78BEF7C, xmp.iid:C30802AB0E2068119109F47FD78BEF7C, xmp.iid:6DC6A057A32068119109F47FD78BEF7C, xmp.iid:F6466B69A32068119109F47FD78BEF7C, xmp.iid:0E90D3C46A2168119109F47FD78BEF7C, xmp.iid:149DDCBF722168119109F47FD78BEF7C, xmp.iid:F2DBA8B0752168119109F47FD78BEF7C, xmp.iid:A2053A937E2168119109F47FD78BEF7C, xmp.iid:380629478B2168119109F47FD78BEF7C, xmp.iid:3459CF908D2168119109F47FD78BEF7C, xmp.iid:803B9EF88E2168119109F47FD78BEF7C, xmp.iid:B9FC8B0F8F2168119109F47FD78BEF7C, xmp.iid:623D6FAA8F2168119109F47FD78BEF7C, xmp.iid:5EE45F27902168119109F47FD78BEF7C, xmp.iid:6A0B7778072068118083C89DB67FB8D5, xmp.iid:3EBB43F80A2068118083B0F466A14666, xmp.iid:B995B6500C2068118083B0F466A14666, xmp.iid:4D2F4C74072068118F62D19A20A02D80, xmp.iid:C05A032D112068118F62D19A20A02D80, xmp.iid:3375D465192068118F62D19A20A02D80, xmp.iid:F1494850102068118C14C0CAFEEE5C8C, xmp.iid:BE3C72BA102068118C14C0CAFEEE5C8C, xmp.iid:F77F1174072068118083948B4E45CBC1, xmp.iid:3AA51B74072068118083948B4E45CBC1, xmp.iid:1260968C072068118083948B4E45CBC1, xmp.iid:1360968C072068118083948B4E45CBC1, xmp.iid:1460968C072068118083948B4E45CBC1, xmp.iid:88F8F7100B2068118083948B4E45CBC1, xmp.iid:5F94468C072068118C14F05DF48B5D49, xmp.iid:6B7FB456082068118C14F05DF48B5D49, xmp.iid:B389B1C3082068118C14F05DF48B5D49, xmp.iid:D117F0E4092068118C14F05DF48B5D49, xmp.iid:D217F0E4092068118C14F05DF48B5D49, xmp.iid:D317F0E4092068118C14F05DF48B5D49, xmp.iid:951263F4222068118C14F05DF48B5D49, xmp.iid:961263F4222068118C14F05DF48B5D49, xmp.iid:EA4BB260282068118C14F05DF48B5D49, xmp.iid:6FBFAB482F2068118C14F05DF48B5D49, xmp.iid:855C6588352068118C14F05DF48B5D49, xmp.iid:F77F1174072068118083FDA46EA5C06A, xmp.iid:F4B11874072068118083FDA46EA5C06A, xmp.iid:FCF88659082068118083FDA46EA5C06A, xmp.iid:FDF88659082068118083FDA46EA5C06A, xmp.iid:4BE95A37DD2168118083FDA46EA5C06A, xmp.iid:4CE95A37DD2168118083FDA46EA5C06A, xmp.iid:2E2D057DDE2168118083FDA46EA5C06A
History When                    : 2012:02:19 16:43:54+11:00, 2012:02:19 17:12:25+11:00, 2012:02:19 17:12:25+11:00, 2012:02:19 20:45:52+11:00, 2012:02:19 21:38:30+11:00, 2012:02:19 22:35:14+11:00, 2012:02:19 22:59:51+11:00, 2012:02:20 02:22:56+11:00, 2012:03:03 15:24:37+11:00, 2012:03:03 15:37:40+11:00, 2012:03:03 15:57:34+11:00, 2012:03:03 15:57:34+11:00, 2012:03:03 18:16:07+11:00, 2012:03:04 14:08:08+11:00, 2012:03:05 09:55:58+11:00, 2012:03:05 11:27:01+11:00, 2012:03:05 12:23:37+11:00, 2012:03:05 12:30:23+11:00, 2012:03:05 12:50:42+11:00, 2012:03:05 13:12:14+11:00, 2012:03:05 13:29:29+11:00, 2012:03:05 13:31:53+11:00, 2012:03:05 14:38:01+11:00, 2012:03:05 16:14:21+11:00, 2012:03:06 16:43:37+11:00, 2012:03:06 17:07:26+11:00, 2012:03:06 17:31:38+11:00, 2012:03:06 17:31:38+11:00, 2012:03:06 17:35:16+11:00, 2012:03:07 11:19:29+11:00, 2012:03:07 11:19:59+11:00, 2012:03:08 11:06:59+11:00, 2012:03:08 12:04:06+11:00, 2012:03:08 12:25:09+11:00, 2012:03:08 13:28:45+11:00, 2012:03:08 14:59:41+11:00, 2012:03:08 15:16:04+11:00, 2012:03:08 15:26:07+11:00, 2012:03:08 15:26:46+11:00, 2012:03:08 15:31:06+11:00, 2012:03:08 15:34:42+11:00, 2012:03:12 13:42:16+11:00, 2012:04:18 12:24:40+10:00, 2012:04:18 12:24:40+10:00, 2012:05:31 18:49:01+10:00, 2012:05:31 18:49:01+10:00, 2012:05:31 19:47:52+10:00, 2012:06:17 18:04:50+10:00, 2012:06:17 18:07:48+10:00, 2012:08:15 11:46:21+10:00, 2012:08:15 11:46:21+10:00, 2012:08:15 11:47:02+10:00, 2012:08:15 12:11:41+10:00, 2012:08:15 12:12:12+10:00, 2012:08:15 12:12:12+10:00, 2012:08:30 12:05:38+10:00, 2012:08:30 12:05:38+10:00, 2012:08:30 12:08:41+10:00, 2012:08:30 12:16:46+10:00, 2012:08:30 12:26:24+10:00, 2012:08:30 12:26:44+10:00, 2012:08:30 15:16:09+10:00, 2012:08:30 15:54:58+10:00, 2012:08:30 15:54:58+10:00, 2012:08:30 16:44:24+10:00, 2012:08:30 17:29:08+10:00, 2012:09:14 14:52:05+10:00, 2012:09:14 14:52:05+10:00, 2012:09:14 14:58:30+10:00, 2012:09:17 12:28:01+10:00, 2012:09:17 12:28:01+10:00, 2012:09:17 12:37:07+10:00, 2012:09:17 12:37:07+10:00
History Software Agent          : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0
History Changed                 : /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata
Derived From Instance ID        : xmp.iid:4CE95A37DD2168118083FDA46EA5C06A
Derived From Document ID        : xmp.did:4BE95A37DD2168118083FDA46EA5C06A
Derived From Original Document ID: xmp.did:F77F11740720681188C68C3169F9D5CA
Derived From Rendition Class    : default
Doc Change Count                : 24629
Format                          : application/pdf
Producer                        : Adobe PDF Library 9.9
Trapped                         : False

EXIF Metadata provided by EXIF.tools